Ultrathin Al‐Assisted Al 2 O 3 Passivation Layer for High‐Stability Tungsten Diselenide Transistors and Their Ambipolar Inverter

2021 ◽  
pp. 2101012
Author(s):  
Haewon Cho ◽  
Pavan Pujar ◽  
Yong In Cho ◽  
Seongin Hong ◽  
Sunkook Kim
Author(s):  
Younan Hua ◽  
Bingsheng Khoo ◽  
Henry Leong ◽  
Yixin Chen ◽  
Eason Chan ◽  
...  

Abstract In wafer fabrication, a silicon nitride (Si3N4) layer is widely used as passivation layer. To qualify the passivation layers, traditionally chemical recipe PAE (H3PO4+ HNO3) is used to conduct passivation pinhole test. However, it is very challenging for us to identify any pinholes in the Si3N4 layer with different layers underneath. For example, in this study, the wafer surface is Si3N4 layer and the underneath layer is silicon substrate. The traditional receipt of PAE cannot be used for passivation qualification. In this paper, we will report a new recipe using KOH solution to identify the pinhole in the Si3N4 passivation layer.


2020 ◽  
Vol 01 ◽  
Author(s):  
Henrik Jensen ◽  
Pernille D. Pedersen

Aims: To evaluate the real-life effect of photocatalytic surfaces on the air quality at two test-sites in Denmark. Background: Poor air quality is today one of the largest environmental issues, due to the adverse effects on human health associated with high levels of air pollution, including respiratory issues, cardiovascular disease (CVD), and lung cancer. NOx removal by TiO2 based photocatalysis is a tool to improve air quality locally in areas where people are exposed. Methods: Two test sites were constructed in Roskilde and Copenhage airport. In Roskilde, the existing asphalt at two parking lots was treated with TiO2 containing liquid and an in-situ ISO 22197-1 test setup was developed to enable in-situ evaluation of the activity of the asphalt. In CPH airport, photocatalytic concrete tiles were installed at the "kiss and fly" parking lot, and NOx levels were continuously monitored in 0.5 m by CLD at the active site and a comparable reference site before and after installation for a period of 2 years. Results: The Roskilde showed high stability of the photocatalytic coating with the activity being largely unchanged over a period of 2 years. The CPH airport study showed that the average NOx levels were decreased by 12 % comparing the before and after NOx concentrations at the active and reference site. Conclusion: The joined results of the two Danish demonstration projects illustrate a high stability of the photocatalytic coating as well as a high potential for improvements of the real-life air quality in polluted areas.


1982 ◽  
Vol 47 (10) ◽  
pp. 2716-2723 ◽  
Author(s):  
Lubomíra Rexová-Benková ◽  
Jiřina Omelková ◽  
Vladimír Kubánek

Endo-D-galacturonanase of Aspergillus sp. was irreversibly adsorbed on polyethyleneterephthalate in an acetate 0.1 mol l-1 buffer solution of pH 4.2. Immobilization of the enzyme resulted in lowering of its activity, the measure of which depended on the amount of the enzyme fixed on the carrier. The highest relative activity (42.4%) had the preparation containing 5.25 mg of the enzyme per 1 g of the carrier. The velocity and intensity of the sorption of the enzyme depended on the ionic strength of the medium, whilst pH, on the other hand, was of no influence. Endo-D-galacturonanase immobilized in a 0.1 mol l-1 buffer was characteristic a) of its fixation strength in salt solutions of various ionic strength and pH, in a 3 mol l-1 guanidine solution, and also in sodium pectate and pectin solutions, b) of its high stability during a long-lasting storage at 4 °C, c) of its operational stability. The immobilization led to a partial change of the action pattern onto the high-molecular substrate, manifested in lowering the decrease of viscosity to degradation degree ratio.


1985 ◽  
Vol 50 (7) ◽  
pp. 1594-1601 ◽  
Author(s):  
Jiří Klíma ◽  
Larisa Baumane ◽  
Janis Stradinš ◽  
Jiří Volke ◽  
Romualds Gavars

It has been found that the decay in dimethylformamide and dimethylformamide-water mixtures of radical anions in five of the investigated 5-nitrofurans is governed by a second-order reaction. Only the decay of the radical anion generated from 5-nitro-2-furfural III may be described by an equation including parallel first- and second-order reactions; this behaviour is evidently caused by the relatively high stability of the corresponding dianion, this being an intermediate in the reaction path. The presence of a larger conjugated system in the substituent in position 2 results in a decrease of the unpaired electron density in the nitro group and, consequently, an increase in the stability of the corresponding radical anions.


2019 ◽  
Vol 7 (29) ◽  
pp. 17357-17365 ◽  
Author(s):  
Bozhao Wu ◽  
Xiangzheng Jia ◽  
Yanlei Wang ◽  
Jinxi Hu ◽  
Enlai Gao ◽  
...  

A new graphyne with high stability, excellent flexibility and carrier mobility is theoretically predicted as a promising anode material for lithium-ion batteries with high capacity.


ACS Nano ◽  
2019 ◽  
Vol 13 (12) ◽  
pp. 14107-14113 ◽  
Author(s):  
Zhipeng Li ◽  
Tianmeng Wang ◽  
Chenhao Jin ◽  
Zhengguang Lu ◽  
Zhen Lian ◽  
...  
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document