Liming and phosphorus fertilization increase cassava root yield without affecting its cooking time

2021 ◽  
Author(s):  
Ben‐Hur S. Rosa ◽  
Adalton M. Fernandes ◽  
Bruno Gazola ◽  
Jesion G. S. Nunes ◽  
Rogério P. Soratto
Author(s):  
Natália Trajano de Oliveira ◽  
Sandra Catia Pereira Uchôa ◽  
José Maria Arcanjo Alves ◽  
José de Anchieta Alves de Albuquerque ◽  
Guilherme Silva Rodrigues

2020 ◽  
Vol 16 (6) ◽  
pp. 47-55
Author(s):  
Jorge Cesar dos Anjos Antonini ◽  
Eduardo Alano Vieira ◽  
Josefino de Freitas Fialho ◽  
Fernando Antônio Macena ◽  
Krishna Naudin ◽  
...  

Although cassava is recognized for its high tolerance to drought, irrigation is showing satisfactory results. However, few studies have been carried out to determine the effects of soil cover, irrigation and the combination of both on crop development. Theobjective of this study was to determine the influence of irrigation and plastic soil cover on the agronomic performance of sweet cassava. The planting was done in beds, in thedouble row system with the stem cutingsimplanted vertically, with 0.60m between rows and 0.80 m between plants. The following treatments were applied: naked non-irrigated bedding, bedding covered with non-irrigated black polyethylene plastic, naked bedding with irrigation and bedding covered with irrigated black polyethylene plastic. Irrigation wasperformedby conventional sprinkling, based on the daily soil water balance at the effective depth of the cassava root system in the different stages of crop development. The characters evaluated were: shoot weight, root yield, starch percentage in the roots and time for cooking. The expression of the characters shoot weight, root yield and starch percentage in the roots wassignificantly influenced by irrigation managementandsoil cover. The individual use of irrigation and plastic soilcover technologies led to increases in root yieldof 55% and 13%, respectively, and when used together, root yieldincreased by 89%.


2020 ◽  
Author(s):  
Michael Gomez Selvaraj ◽  
Manuel Valderrama ◽  
Diego Guzman ◽  
Milton Valencia ◽  
Henry Ruiz ◽  
...  

Abstract Background: Rapid non-destructive measurements to predict cassava root yield over the full growing season through large numbers of germplasm and multiple environments is a huge challenge in Cassava breeding programs. As opposed to waiting until the harvest season, multispectral imagery using unmanned aerial vehicles (UAV) are capable of measuring the canopy metrics and vegetation indices (VIs) traits at different time points of the growth cycle. This resourceful time series aerial image processing with appropriate analytical framework is very important for the automatic extraction of phenotypic features from the image data. Many studies have demonstrated the usefulness of advanced remote sensing technologies coupled with machine learning (ML) approaches for accurate prediction of valuable crop traits. Until now, Cassava has received little to no attention in aerial image-based phenotyping and ML model testing. Results: To accelerate image processing, an automated image-analysis framework called CIAT Pheno-i was developed to extract plot level vegetation indices/canopy metrics. Multiple linear regression models were constructed at different key growth stages of cassava, using ground-truth data and vegetation indices obtained from a multispectral sensor. Henceforth, the spectral indices/features were combined to develop models and predict cassava root yield using different Machine learning techniques. Our results showed that (1) Developed CIAT pheno-i image analysis framework was found to be easier and more rapid than manual methods. (2) The correlation analysis of four phenological stages of cassava revealed that elongation (EL) and late bulking (LBK) were the most useful stages to estimate above-ground biomass (AGB), below-ground biomass (BGB) and canopy height (CH). (3) The multi-temporal analysis revealed that cumulative image feature information of EL+early bulky (EBK) stages showed a higher significant correlation (r = 0.77) for Green Normalized Difference Vegetation indices (GNDVI) with BGB than individual time points. Canopy height measured on the ground correlated well with UAV (CHuav)-based measurements (r = 0.92) at late bulking (LBK) stage. Among different image features, normalized difference red edge index (NDRE) data were found to be consistently highly correlated (r = 0.65 to 0.84) with AGB at LBK stage. (4) Among the four ML algorithms used in this study, k-Nearest Neighbours (kNN), Random Forest (RF) and Support Vector Machine (SVM) showed the best performance for root yield prediction with the highest accuracy of R2 = 0.67, 0.66 and 0.64, respectively. Conclusion: UAV platforms, time series image acquisition, automated image analytical framework (CIAT Pheno-i), and key vegetation indices (VIs) to estimate phenotyping traits and root yield described in this work have great potential for use as a selection tool in the modern cassava breeding programs around the world to accelerate germplasm and varietal selection. The image analysis software (CIAT Pheno-i) developed from this study can be widely applicable to any other crop to extract phenotypic information rapidly.


2019 ◽  
Vol 239 ◽  
pp. 149-158 ◽  
Author(s):  
Alison Borges Vitor ◽  
Rafael Parreira Diniz ◽  
Carolina Vianna Morgante ◽  
Rafaela Priscila Antônio ◽  
Eder Jorge de Oliveira

2021 ◽  
Vol 262 ◽  
pp. 108038
Author(s):  
Olabisi Omolara Onasanya ◽  
Stefan Hauser ◽  
Magdalena Necpalova ◽  
Felix Kolawole Salako ◽  
Christine Kreye ◽  
...  

2020 ◽  
Vol 16 (3) ◽  
pp. 37-47
Author(s):  
Rogério Borges de Oliveira Paz ◽  
Claudio Hideo Martins da Costa ◽  
Eduardo Alano Vieira ◽  
Mirelle Vaz Coelho ◽  
Simério Carlos da Silva Cruz ◽  
...  

Sweet cassavais cultivatedthroughout Brazil, but needs to be better studied in the Cerrado region that has potential for its cultivation. The objective of this work was to evaluate the performanceof sweet cassava cultivars in Cerrado soil duringtwo growing season.The experiments were carried in 2016-2017 and 2017-2018with six cultivars, in Jataí-GO. The experimental design was factorial scheme 6 x 2,being 6cultivarsand two growing season, with three replications.The following evaluations were carried out: number of stems, stem diameter, height of the first branch, height of plants, number of roots per plant, length of roots, diameter of roots, weight of fresh roots, weight of fresh roots, weight of fresh shoots, harvest index and cooking time. The cultivar BRS 399 hadbetter root yield in the two crop years.The cultivars BRS 399, BRS 400, BRS 401 and IAC 576/70 increased the plant shoot weightfrom the first to the second growing season.The harvest index of cultivars BRS 400 and BRS 401 decreased from the first to the second growing season.It was concluded that the cultivars BRS 397, BRS 398, BRS 399 and IAC 576/70 presented the best agronomic performance in the 2016/2017 growing season, in turn, in the growing season2017/2018, the cultivars BRS 397, BRS 399 and BRS400 presented the best results. The cultivars BRS-397 and BRS-399 showed more stable agronomic behavior than the others.


2021 ◽  
Vol 150 ◽  
pp. 105810
Author(s):  
Friday Ekeleme ◽  
Alfred Dixon ◽  
Godwin Atser ◽  
Stefan Hauser ◽  
David Chikoye ◽  
...  

2019 ◽  
Vol 120 ◽  
pp. 58-66
Author(s):  
E. Kanju ◽  
V.N.E. Uzokwe ◽  
P. Ntawuruhunga ◽  
S. Tumwegamire ◽  
J. Yabeja ◽  
...  

1995 ◽  
Vol 24 (4) ◽  
pp. 249-254 ◽  
Author(s):  
Anselm A. Enete ◽  
Felix I. Nweke ◽  
Eugene C. Okorji

Research in 1973 attributed large cassava root yield differences among three villages in southeast Nigeria to equally large population density differences. In 1993, the Nigerian national team of the Collaborative Study of Cassava in Africa (COSCA) went back to the three villages to see whether population growth had led to yield declines. They found that the wide gap in yields between the high and low population density villages was maintained, apparently due to differences in soil type, fallow periods, cassava plant densities and harvest dates. Cassava root yield had doubled in the high population density area, increased but not doubled in the medium population density area and declined in the low population density area. The differences in the yield trends among the three villages were due to the use of improved cassava varieties in the high population density area.


2020 ◽  
Author(s):  
Michael Gomez Selvaraj ◽  
Manuel Valderrama ◽  
Diego Guzman ◽  
Milton Valencia ◽  
Henry Ruiz ◽  
...  

Abstract Background: Rapid non-destructive measurements to predict cassava root yield over the full growing season through large numbers of germplasm and multiple environments is a huge challenge in Cassava breeding programs. As opposed to waiting until the harvest season, multispectral imagery using unmanned aerial vehicles (UAV) are capable of measuring the canopy metrics and vegetation indices (VIs) traits at different time points of the growth cycle. This resourceful time series aerial image processing with appropriate analytical framework is very important for the automatic extraction of phenotypic features from the image data. Many studies have demonstrated the usefulness of advanced remote sensing technologies coupled with machine learning (ML) approaches for accurate prediction of valuable crop traits. Until now, Cassava has received little to no attention in aerial image-based phenotyping and ML model testing. Results : To accelerate image processing, an automated image-analysis framework called CIAT Pheno-i was developed to extract plot level vegetation indices/canopy metrics. Multiple linear regression models were constructed at different key growth stages of cassava, using ground-truth data and vegetation indices obtained from a multispectral sensor. Henceforth, the spectral indices/features were combined to develop models and predict cassava root yield using different Machine learning techniques. Our results showed that (1) Developed CIAT pheno-i image analysis framework was found to be easier and more rapid than manual methods. (2) The correlation analysis of four phenological stages of cassava revealed that elongation (EL) and late bulking (LBK) were the most useful stages to estimate above-ground biomass (AGB), below-ground biomass (BGB) and canopy height (CH). (3) The multi-temporal analysis revealed that cumulative image feature information of EL+early bulky (EBK) stages showed a higher significant correlation ( r = 0.77) for Green Normalized Difference Vegetation indices (GNDVI) with BGB than individual time points. Canopy height measured on the ground correlated well with UAV (CHuav)-based measurements ( r = 0.92) at late bulking (LBK) stage. Among different image features, normalized difference red edge index (NDRE) data were found to be consistently highly correlated ( r = 0.65 to 0.84) with AGB at LBK stage. (4) Among the four ML algorithms used in this study, k-Nearest Neighbours (kNN), Random Forest (RF) and Support Vector Machine (SVM) showed the best performance for root yield prediction with the highest accuracy of R 2 = 0.67, 0.66 and 0.64, respectively. Conclusion : UAV platforms, time series image acquisition, automated image analytical framework (CIAT Pheno-i), and key vegetation indices (VIs) to estimate phenotyping traits and root yield described in this work have great potential for use as a selection tool in the modern cassava breeding programs around the world to accelerate germplasm and varietal selection. The image analysis software (CIAT Pheno-i) developed from this study can be widely applicable to any other crop to extract phenotypic information rapidly.


Sign in / Sign up

Export Citation Format

Share Document