Purpose
This study aims to investigate the production of scaffolds by selective laser sintering (SLS) using poly(vinyl alcohol) (PVA) polymer, for in vitro studies, a relatively new and growing area in which scaffolds could be used in the design of three-dimensional models for in vitro disease model or tissue equivalent for safety and effectiveness tests.
Design/methodology/approach
The influence of the SLS process parameters laser power, 26 W and 32 W, and number of laser scans, 1, 2, 4 and 6, on the surface microstructure of the samples and on the degree of crystallinity and chemical stability of PVA material, was investigated using powder with particle size of 20-320 µm. Laser sintered PVA samples were subjected to cell culture tests using osteoblastic cells derived from human osteosarcoma (SaOs-2).
Findings
The laser power has no significant influence on the microstructure of the laser-sintered samples, however the number of scans has a considerable influence on the sintering degree; the SLS process causes a decrease in the degree of crystallinity and changes the chemical structure of the as-received PVA, especially when using higher laser power and more number of scans. Preliminary in vitro cell culture tests show that the laser-sintered PVA material is biocompatible with SaOs-2 cells.
Originality/value
SLS offers good potential for the fabrication of scaffolds and thus, may be applied as an alternative to conventional scaffold fabrication processes to overcome their limitations.