Candelilla wax‐based oleogels versus palm oil: evaluation of physical properties of innovative and conventional lipids using optical techniques

Author(s):  
Iwona Szymańska ◽  
Anna Żbikowska ◽  
Sylwia Onacik‐Gür
2015 ◽  
Vol 118 (7) ◽  
pp. 1007-1017 ◽  
Author(s):  
Shinichi Yoshikawa ◽  
Haruyasu Kida ◽  
Yasuki Matsumura ◽  
Kiyotaka Sato
Keyword(s):  

Author(s):  
Mazhar Hussain ◽  
Daniel Levacher ◽  
Nathalie Leblanc ◽  
Hafida Zmamou ◽  
Irini Djeran Maigre ◽  
...  

Crude bricks are composite materials manufactured with sediments and natural fibers. Natural fibers are waste materials and used in construction materials for reinforcement. Their reuse in manufacturing reinforced crude bricks is eco-friendly and improves mechanical and thermal characteristics of crude bricks. Factors such as type of fibers, percentage of fibers, length of fibers and distribution of fibers inside the bricks have significant effect on mechanical, physical and thermal properties of biobased composite materials. It can be observed by tests such as indirect tensile strength, compressive strength for mechanical characteristics, density, shrinkage, color for physical properties, thermal conductivity and resistivity for thermal properties, and inundation test for durability of crude bricks. In this study, mechanical and physical characteristics of crude bricks reinforced with palm oil fibers are investigated and effect of change in percentage and length of fibers is observed. Crude bricks of size 4*4*16 cm3 are manufactured with dredged sediments from Usumacinta River, Mexico and reinforced with palm oil fibers at laboratory scale. For this purpose, sediments and palm oil fibers characteristics were studied. Length of fibers used is 2cm and 3cm. Bricks manufacturing steps such as sediments fibers mixing, moulding, compaction and drying are elaborated. Dynamic compaction is opted for compaction of crude bricks due to energy control. Indirect tensile strength and compressive strength tests are conducted to identify the mechanical characteristics of crude bricks. Physical properties of bricks are studied through density and shrinkage. Durability of crude bricks is observed with inundation test. Thermal properties are studied with thermal conductivity and resistivity test. Distribution and orientation of fibers and fibers counting are done to observe the homogeneity of fibers inside the crude bricks. Finally, comparison between the mechanical characteristics of crude bricks manufactured with 2cm and 3cm length with control specimen was made.


2013 ◽  
Vol 54 (2) ◽  
pp. 1360-1368 ◽  
Author(s):  
Jorge F. Toro-Vazquez ◽  
Rosalba Mauricio-Pérez ◽  
Marco Martín González-Chávez ◽  
Mayra Sánchez-Becerril ◽  
José de Jesús Ornelas-Paz ◽  
...  

2002 ◽  
Vol 79 (12) ◽  
pp. 1163-1168 ◽  
Author(s):  
M. S. Miskandar ◽  
Y. B. Che Man ◽  
M. S. A. Yusoff ◽  
R. Abdul Rahman
Keyword(s):  

2018 ◽  
Vol 1049 ◽  
pp. 012004
Author(s):  
Amira Maryam Md Sukaimi ◽  
Raja Nurul Afiqah Raja Zulkefli ◽  
Haryati Yaacob ◽  
Ramadhansyah Putra Jaya ◽  
Norhidayah Abdul Hassan ◽  
...  

2018 ◽  
Author(s):  
Ika Kusuma Nugraheni ◽  
Nuryati Nuryati ◽  
Anggun Angkasa B. Persada ◽  
Triyono Triyono ◽  
Wega Trisunaryanti

1932 ◽  
Vol 5 (3) ◽  
pp. 320-325
Author(s):  
G. Martin ◽  
R. Thiollet

Abstract Among the accelerators which are at present on the market two are very much used, viz., diphenylguanidine as an accelerator of medium activity, and tetramethylthiouram disulfide as a rapid accelerator. Diphenylguanidine is used most of the time in proportions between 0.5 to 1 per cent, based on the rubber, and with about 3 per cent of sulfur. Tetramethylthiouram disulfide is used in proportions of between 0.2 and 0.5 per cent, based on the rubber, with about 1.8 per cent of sulfur. In this way “nervy” mixtures are obtained which have excellent physical properties; but it must be recognized that these two accelerators are, each in its class, the ones which impart to mixtures the poorest aging qualities. For example, the mixture: Pale crepe 100 Zinc oxide 5 Sulfur 3 Palm oil 1 Stearic acid 0.5 Diphenylguanidine 0.7 vulcanized 1 hour at 3 kilograms pressure, i. e., under conditions which lead to the best physical properties for the proportions used, was investigated.


2014 ◽  
Vol 2014 ◽  
pp. 1-6 ◽  
Author(s):  
Nattapong Namliwan ◽  
Tanakorn Wongwuttanasatian

The objective of this study was to test the performance of diesel engine using diesel B3 mixed with crude palm oil in ratios of 95 : 5, 90 : 10, and 85 : 15, respectively, and to compare the results with diesel B3. According to the tests, they showed that the physical properties of the mixed fuel in the ratio of 95 : 5 were closest to those of diesel B3. The performance of the diesel engine that used mixed fuels had 5–17% lower torque and power than that of diesel B3. The specific fuel consumption of mixed fuels was 7–33% higher than using diesel B3. The components of gas emissions by using mixed fuel had 1.6–52% fewer amount of carbon monoxide (CO), carbon dioxide (CO2), sulfur dioxide (SO2), and oxygen (O2) than those of diesel B3. On the other hand, nitric oxide (NO) and nitrogen oxides (NOX) emissions when using mixed fuels were 10–39% higher than diesel B3. By comparing the physical properties, the performance of the engine, and the amount of gas emissions of mixed fuel, we found out that the 95 : 5 ratio by volume was a suitable ratio for agricultural diesel engine (low-speed diesel engine).


Sign in / Sign up

Export Citation Format

Share Document