The accuracy evaluation method of baseline estimation algorithms in energy dispersive X‐ray fluorescence spectrum analysis

The advances in recent years in the microanalytical capabilities of conventional TEM's fitted with probe forming lenses allow much more detailed investigations to be made of the microstructures of complex alloys, such as ferritic steels, than have been possible previously. In particular, the identification of individual precipitate particles with dimensions of a few tens of nanometers in alloys containing high densities of several chemically and crystallographically different precipitate types is feasible. The aim of the investigation described in this paper was to establish a method which allowed individual particle identification to be made in a few seconds so that large numbers of particles could be examined in a few hours.A Philips EM400 microscope, fitted with the scanning transmission (STEM) objective lens pole-pieces and an EDAX energy dispersive X-ray analyser, was used at 120 kV with a thermal W hairpin filament. The precipitates examined were extracted using a standard C replica technique from specimens of a 2¼Cr-lMo ferritic steel in a quenched and tempered condition.

Download Full-text

Energy Dispersive X-Ray Measurements of thin Metal Foils

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100092098 ◽

1976 ◽

Vol 34 ◽

pp. 426-427

Author(s):

J. Bentley ◽

E. A. Kenik

Keyword(s):

Materials Science ◽

Energy Dispersive Spectrometer ◽

Thin Foil ◽

Thin Metal ◽

Energy Dispersive ◽

Thin Specimen ◽

X Ray ◽

Metal Foils ◽

Small Probe ◽

Scanning Transmission

Instruments combining a 100 kV transmission electron microscope (TEM) with scanning transmission (STEM), secondary electron (SEM) and x-ray energy dispersive spectrometer (EDS) attachments to give analytical capabilities are becoming increasingly available and useful. Some typical applications in the field of materials science which make use of the small probe size and thin specimen geometry are the chemical analysis of small precipitates contained within a thin foil and the measurement of chemical concentration profiles near microstructural features such as grain boundaries, point defect clusters, dislocations, or precipitates. Quantitative x-ray analysis of bulk samples using EDS on a conventional SEM is reasonably well established, but much less work has been performed on thin metal foils using the higher accelerating voltages available in TEM based instruments.

Download Full-text

Preparation And elemental analysis of ancient fibers

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100126846 ◽

1987 ◽

Vol 45 ◽

pp. 410-411

Author(s):

Allen Angel ◽

Kathryn A. Jakes

Keyword(s):

Cross Sections ◽

Physical Structure ◽

Energy Dispersive ◽

Archaeological Sites ◽

X Ray ◽

Long Term Storage ◽

Backscattered Electron ◽

Electron Imaging

Fabrics recovered from archaeological sites often are so badly degraded that fiber identification based on physical morphology is difficult. Although diagenetic changes may be viewed as destructive to factors necessary for the discernment of fiber information, changes occurring during any stage of a fiber's lifetime leave a record within the fiber's chemical and physical structure. These alterations may offer valuable clues to understanding the conditions of the fiber's growth, fiber preparation and fabric processing technology and conditions of burial or long term storage (1).Energy dispersive spectrometry has been reported to be suitable for determination of mordant treatment on historic fibers (2,3) and has been used to characterize metal wrapping of combination yarns (4,5). In this study, a technique is developed which provides fractured cross sections of fibers for x-ray analysis and elemental mapping. In addition, backscattered electron imaging (BSI) and energy dispersive x-ray microanalysis (EDS) are utilized to correlate elements to their distribution in fibers.

Download Full-text