scholarly journals Possibilistic Interpretation of Mistuning in Bladed Disks by Fuzzy Algebra

2012 ◽  
pp. 109-116 ◽  
Author(s):  
H. Çağlar Karataş ◽  
Ender Ciğeroğlu ◽  
H. Nevzat Özgüven
Keyword(s):  
Bladed Disks ◽  
Fuzzy Algebra

scholarly journals M-Hazy Vector Spaces over M-Hazy Field

Mathematics ◽  
2021 ◽  
Vol 9 (10) ◽  
pp. 1118
Author(s):  
Faisal Mehmood ◽  
Fu-Gui Shi
Keyword(s):  
Vector Space ◽  
Linear Transformation ◽  
Binary Operation ◽  
Vector Spaces ◽  
Fundamental Properties ◽  
Classical Algebra ◽  
Important Development ◽  
Fuzzy Algebra ◽  
Convex Spaces

The generalization of binary operation in the classical algebra to fuzzy binary operation is an important development in the field of fuzzy algebra. The paper proposes a new generalization of vector spaces over field, which is called M-hazy vector spaces over M-hazy field. Some fundamental properties of M-hazy field, M-hazy vector spaces, and M-hazy subspaces are studied, and some important results are also proved. Furthermore, the linear transformation of M-hazy vector spaces is studied and their important results are also proved. Finally, it is shown that M-fuzzifying convex spaces are induced by an M-hazy subspace of M-hazy vector space.

scholarly journals A sparse preconditioned iterative method for vibration analysis of geometrically mistuned bladed disks

2009 ◽  
Vol 87 (5-6) ◽  
pp. 342-354 ◽  
Author(s):  
Vladislav Ganine ◽  
Mathias Legrand ◽  
Hannah Michalska ◽  
Christophe Pierre
Keyword(s):  
Iterative Method ◽  
Vibration Analysis ◽  
Bladed Disks ◽  
Preconditioned Iterative

Piezoelectric Networks for Vibration Suppression of Mistuned Bladed Disks

2007 ◽  
Vol 129 (5) ◽  
pp. 559-566 ◽  
Author(s):  
Hongbiao Yu ◽  
K. W. Wang
Keyword(s):  
Vibration Suppression ◽  
Periodic Structures ◽  
Electric Circuit ◽  
Forced Response ◽  
Bladed Disks ◽  
Vibration Localization ◽  
Network Concept ◽  
Engine Order ◽  
The Individual ◽  
Local Circuits

Extensive investigations have been conducted to study the vibration localization phenomenon and the excessive forced response that can be caused by mistuning in bladed disks. Most previous researches have focused on analyzing∕predicting localization or attacking the mistuning issue via mechanical tailoring. Few have focused on developing effective vibration control methods for such systems. This study extends the piezoelectric network concept, which has been utilized for mode delocalization in periodic structures, to the control of mistuned bladed disks under engine order excitation. A piezoelectric network is synthesized and optimized to effectively suppress vibration in bladed disks. One of the merits of such an approach is that the optimum design is independent of the number of spatial harmonics, or engine orders. Local circuits are first formulated by connecting inductors and resistors with piezoelectric patches on the individual blades. Although these local circuits can function as conventional damped absorber when properly tuned, they do not perform well for bladed disks under all engine order excitations. To address this issue, capacitors are introduced to couple the individual local circuitries. Through such networking, an absorber system that is independent of the engine order can be achieved. Monte Carlo simulation is performed to investigate the effectiveness of the network for a bladed disk with a range of mistuning level of its mechanical properties. The robustness issue of the network in terms of detuning of the electric circuit parameters is also studied. Finally, negative capacitance is introduced and its effect on the performance and robustness of the network is investigated.

Vibration Suppression of Mistuned Coupled-Blade-Disk Systems Using Piezoelectric Circuitry Network

2009 ◽  
Vol 131 (2) ◽  
Author(s):  
Hongbiao Yu ◽  
K. W. Wang
Keyword(s):  
Piezoelectric Transducer ◽  
Vibration Suppression ◽  
Structural Vibration ◽  
Bladed Disks ◽  
Disk Model ◽  
Bladed Disk ◽  
Engine Order ◽  
Optimal Network ◽  
Random Mistuning ◽  
Engine Components

For bladed-disk assemblies in turbomachinery, the elements are often exposed to aerodynamic loadings, the so-called engine order excitations. It has been reported that such excitations could cause significant structural vibration. The vibration level could become even more excessive when the bladed disk is mistuned, and may cause fatigue damage to the engine components. To effectively suppress vibration in bladed disks, a piezoelectric transducer networking concept has been explored previously by the authors. While promising, the idea was developed based on a simplified bladed-disk model without considering the disk dynamics. To advance the state of the art, this research further extends the investigation with focus on new circuitry designs for a more sophisticated and realistic system model with the consideration of coupled-blade-disk dynamics. A novel multicircuit piezoelectric transducer network is synthesized and analyzed for multiple-harmonic vibration suppression of bladed disks. An optimal network is derived analytically. The performance of the network for bladed disks with random mistuning is examined through Monte Carlo simulation. The effects of variations (mistuning and detuning) in circuit parameters are also studied. A method to improve the system performance and robustness utilizing negative capacitance is discussed. Finally, experiments are carried out to demonstrate the vibration suppression capability of the proposed piezoelectric circuitry network.

scholarly journals High-Fidelity Sensitivity Analysis of Modal Properties of Mistuned Bladed Disks Regarding Material Anisotropy

2018 ◽  
Author(s):  
Adam Koscso ◽  
Guido Dhondt ◽  
E. P. Petrov
Keyword(s):  
Sensitivity Analysis ◽  
Finite Element ◽  
Natural Frequencies ◽  
Mode Shapes ◽  
Finite Element Models ◽  
Coordinate Systems ◽  
Bladed Disks ◽  
Bladed Disk ◽  
Material Orientation

A new method has been developed for sensitivity calculations of modal characteristics of bladed disks made of anisotropic materials. The method allows the determination of the sensitivity of the natural frequencies and mode shapes of mistuned bladed disks with respect to anisotropy angles that define the crystal orientation of the monocrystalline blades using full-scale finite element models. An enhanced method is proposed to provide high accuracy for the sensitivity analysis of mode shapes. An approach has also been developed for transforming the modal sensitivities to coordinate systems used in industry for description of the blade anisotropy orientations. The capabilities of the developed methods are demonstrated on examples of a single blade and a mistuned realistic bladed disk finite element models. The modal sensitivity of mistuned bladed disks to anisotropic material orientation is thoroughly studied.

Intentional Response Reduction by Harmonic Mistuning of Bladed Disks With Aerodynamic Damping

2018 ◽  
Author(s):  
Sebastian Willeke ◽  
Lukas Schwerdt ◽  
Lars Panning-von Scheidt ◽  
Jörg Wallaschek
Keyword(s):  
Wave Train ◽  
Wave Mode ◽  
Forced Response ◽  
Mode Shapes ◽  
Bladed Disks ◽  
Nodal Diameter ◽  
Aerodynamic Damping ◽  
Mode Pair ◽  
Localized Mode ◽  
Amplitude Level

A harmonic mistuning concept for bladed disks is analyzed in order to intentionally reduce the forced response of specific modes below their tuned amplitude level. By splitting a mode pair associated with a specific nodal diameter pattern, the lightly damped traveling wave mode of the nominally tuned blisk is superposed with its counter-rotating complement. Consequently, a standing wave is formed in which the former wave train benefits from an increase in aerodynamic damping. Unlike previous analyses of randomly perturbed configurations, the mode-specific stabilization is intentionally promoted through adjusting the harmonic content of the mistuning pattern. Through a re-orientation of the localized mode shapes in relation to the discrete blades, the response is additionally attenuated by an amount of up to 7.6 %. The achievable level of amplitude reduction is analytically predicted based on the properties of the tuned system. Furthermore, the required degree of mistuning for a sufficient separation of a mode pair is derived.

Sign in / Sign up

Export Citation Format

Share Document