Low-pressure Metalorganic Chemical Vapor Deposition and Characterization of YBa2Cu3O7−x Thin Films

Author(s):  
P. Zawadzki ◽  
G. S. Tompa ◽  
P. Norris ◽  
D. W. Noh ◽  
B. Gallois ◽  
...  
1993 ◽  
Vol 300 ◽  
Author(s):  
M. S. Feng ◽  
Y. M. Hsin ◽  
C. H. Wu

ABSTRACTA pseudomorphic Ga0.1In0.9P/InP MESFET grown by low pressure metalorganic chemical vapor deposition(LP-MOCVD) has been fabricated and characterized. The results indicated a transconductance of 66.7 ms/mm and a saturation drain current (Idss) of 55.6 mA have been achieved; furthermore, the Schottky barrier on InGaP as high as 0.67eV can be obtained using Pt2Si as the gate material. For comparison, a conventional InP MESFET with 5μm gate length has also been fabricated on InP epitaxial layer grown by low pressure metalorganic chemical vapor deposition on Fe-doped semi-insulating InP substrate. The transconductance and Idss were found to be 46.7 mS/mm and 43.1 mA at zero gate, respectively, for the depletion mode n-channel MESFET with Au as the gate metal; whereas, for the MESFET using Pt2Si as the gate metal, a transconductance of 40.3 mS/mm and a saturation drain current of 41.1 mA at zero gate bias have been obtained. The results indicated that Ga0.1In0.9P/lnP MESFET has better performance than InP MESFET because of higher energy gap of Ga0.1In0.9P.


RSC Advances ◽  
2016 ◽  
Vol 6 (6) ◽  
pp. 4867-4871 ◽  
Author(s):  
Mingxian Wang ◽  
Weiguang Wang ◽  
Zhao Li ◽  
Xuejian Du ◽  
Xianjin Feng ◽  
...  

TiO2 thin films with anatase structure have been prepared on [LaAlO3]0.3[SrAl0.5Ta0.5O3]0.7 (LSAT) (001) substrates by metalorganic chemical vapor deposition (MOCVD) in the substrate temperature range of 500–650 °C.


Sign in / Sign up

Export Citation Format

Share Document