A Novel Approach for Stabilizing Heavy Metals in Municipal Solid Waste Incineration (MSWI) Fly Ash Using Waste Fishbone Hydroxyapatite (FB-HAP)

2021 ◽  
pp. 789-794
Author(s):  
Amirhomayoun Saffarzadeh ◽  
Mitali Nag ◽  
Takeshi Nomichi ◽  
Takayuki Shimaoka ◽  
Hirofumi Nakayama ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Fly Ash ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Waste Incineration ◽  
Municipal Solid Waste Incineration ◽  
Mswi Fly Ash ◽  
Novel Approach

scholarly journals An Experimental Study on the Melting Solidification of Municipal Solid Waste Incineration Fly Ash

2021 ◽  
Vol 13 (2) ◽  
pp. 535
Author(s):  
Jing Gao ◽  
Tao Wang ◽  
Jie Zhao ◽  
Xiaoying Hu ◽  
Changqing Dong
Keyword(s):  
Heavy Metals ◽  
High Temperature ◽  
Fly Ash ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Liquid Slag ◽  
Melting Process ◽  
Waste Incineration ◽  
Municipal Solid Waste Incineration ◽  
Mswi Fly Ash

Melting solidification experiments of municipal solid waste incineration (MSWI) fly ash were carried out in a high-temperature tube furnace device. An ash fusion temperature (AFT) test, atomic absorption spectroscopy (AAS), scanning electron microscope (SEM), and X-ray diffraction (XRD) were applied in order to gain insight into the ash fusibility, the transformation during the melting process, and the leaching behavior of heavy metals in slag. The results showed that oxide minerals transformed into gehlenite as temperature increased. When the temperature increased to 1300 °C, 89 °C higher than the flow temperature (FT), all of the crystals transformed into molten slag. When the heating temperatures were higher than the FT, the volatilization of the Pb, Cd, Zn, and Cu decreased, which may have been influenced by the formation of liquid slag. In addition, the formation of liquid slag at a high temperature also improved the stability of heavy metals in heated slag.

Analysis of Heavy Metal Leaching in Fly Ash from One Shanghai Municipal Solid Waste Incineration (MSWI) Plant

2012 ◽  
Vol 531 ◽  
pp. 292-295
Author(s):  
Hai Ying Zhang ◽  
Guo Liang Yuan ◽  
Guo Xian Ma
Keyword(s):  
Heavy Metals ◽  
Fly Ash ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Hazardous Waste ◽  
Extraction Procedure ◽  
Waste Incineration ◽  
Municipal Solid Waste Incineration ◽  
Mswi Fly Ash ◽  
Leaching Toxicity

The characteristics and leaching behavior of heavy metals in fly ash, sampled from one MSWI (municipal solid waste incineration) plant in Shanghai China, were investigated. The results indicated that the main elements of fly ash were Fe, K, Na, Cl, Si, Ca, Al, and the total fraction of heavy metals was in the range of 0.8 % - 2.0%. Hence, MSWI fly ash was considered to be one kind of hazardous waste due to its potential environmental risk. Leaching toxicity was performed on fly ash samples from the MSWI plant in Shanghai China. Leaching toxicity of the heavy metals by the ALT (available leaching toxicity) procedure exceeded that by the HVEP (horizontal vibration extraction procedure) standard. Leaching concentrations of Ni, Zn, Cd and Pb exceeded the limit of hazardous waste identification standard. Hence, fly ash is a hazardous waste.

H2S adsorption by municipal solid waste incineration (MSWI) fly ash with heavy metals immobilization

Chemosphere ◽  
2018 ◽  
Vol 195 ◽  
pp. 40-47 ◽  
Author(s):  
Huanan Wu ◽  
Yu Zhu ◽  
Songwei Bian ◽  
Jae Hac Ko ◽  
Sam Fong Yau Li ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Fly Ash ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Waste Incineration ◽  
Municipal Solid Waste Incineration ◽  
Mswi Fly Ash ◽  
H2s Adsorption

Leaching of Heavy Metals from Municipal Solid Waste Incineration (MSWI) Fly Ash Using Sulfuric Acid

2012 ◽  
Vol 249-250 ◽  
pp. 922-926 ◽  
Author(s):  
Hai Ying Zhang ◽  
Guo Xian Ma
Keyword(s):  
Heavy Metals ◽  
Sulfuric Acid ◽  
Fly Ash ◽  
Nitric Acid ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Waste Incineration ◽  
Acid Extraction ◽  
Municipal Solid Waste Incineration ◽  
Mswi Fly Ash

Municipal solid waste incineration (MSWI) fly ash, a must by-product in incineration of municipal solid waste (MSW) combustion is of environmental concern due to its enrichment in heavy metals (Ni, Cd, Cu and Pb). Extraction using sulfuric acid is a conventional method of safe treatment of fly ash. In this work, influence of sulfuric acid concentration and liquid to solid ratio on removal efficiency of the four heavy metals was investigated. It was found that Removal ratio followed the decreasing sequence of Cd > Cu > Pb >Zn for acid extraction using sulfuric acid, quite different with that sequence of Pb > Cd > Cu > Zn for extraction using nitric acid. Sulfuric acid was efficient in removing Cd and Cu, but less efficient in removing Ni and Zn. Compared with nitric acid, sulfuric acid was less effective in removing Pb, Cu and Ni.

scholarly journals Heavy Metals Removing from Municipal Solid Waste Incineration Fly Ashes by Electric Field-Enhanced Washing

Materials ◽  
2020 ◽  
Vol 13 (3) ◽  
pp. 793 ◽  
Author(s):  
Yang Tian ◽  
Rong Wang ◽  
Zhenggang Luo ◽  
Rui Wang ◽  
Feihua Yang ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Fly Ash ◽  
Electric Field ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Waste Incineration ◽  
Municipal Solid Waste Incineration ◽  
Fly Ashes ◽  
Mswi Fly Ash ◽  
Metals Removal

Municipal solid waste incineration (MSWI) fly ash contains chlorides, heavy metals, and organic pollutants, which requires appropriate disposal to eliminate this risk. In this study, the effects of agents on heavy metals removal from MSWI fly ash by electric field-enhanced washing were systematically studied. The results show that when these fly ashes were washed at a current density of 35 mA/cm2, polarity switching frequency of 40 Hz, Ethylenediaminetetraacetic acid (EDTA) dosage of 0.5 mol/L, and a pH of 2 for 4 h, almost all of the Cd and Ni could be were removed, with a removal efficiency of 100.00% and 99.59%, respectively. Meanwhile, it also shows a significant effect on Cu and Zn, with a removal efficiency higher than 85%. After washing, the results of the sequential extraction procedure showed that the residual forms of Pb, Cu, Zn, Cd, Ni, and As increased obviously. According to GB5085.3-2007, the toxicity of the treated MSWI fly ash were below their thresholds of 5 and 1 mg/L for Pb and Cd, respectively. Thus, a novel technology for heavy metals removal from MSWI fly ash is proposed.

scholarly journals Electrokinetic remediation of heavy metals from municipal solid waste incineration fly ash pretreated by nitric acid

2018 ◽  
Vol 5 (8) ◽  
pp. 180372 ◽  
Author(s):  
Huilin Li ◽  
Faheem Muhammad ◽  
Yujie Yan ◽  
Manli Zhang ◽  
Binquan Jiao ◽  
...  
Keyword(s):  
Heavy Metals ◽  
Fly Ash ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Removal Efficiency ◽  
Waste Incineration ◽  
Electrokinetic Remediation ◽  
Municipal Solid Waste Incineration ◽  
Mswi Fly Ash ◽  
Acid Pretreatment

Municipal solid waste incineration (MSWI) fly ash has a high concentration of heavy metals (HMs) which are hazardous to the environment. Moreover, it has high pH and buffering capacity which hinders the removal of HMs. Another constraining factor is the considerable fraction of HMs which exist in oxidizable and reducible states. The acid pretreatment of MSWI fly ash is a key solution to this problem. Therefore, the current experiment is carried out to evaluate the effect of acid pretreatment of MSWI fly ash and reaction/proposed time on the removal efficiency of HMs through an electrokinetic experiment. The leaching experiment results show that acid pretreatment has increased the desorption/release of heavy metal ions (Pb 2+ , Cd 2+ , Cu 2+ and Zn 2+ ). It enhances the migration of HM ions in electrolytic cells which get precipitated at the cathode, thereby increasing the removal efficiency of HMs in the electrokinetic experiment. Moreover, it is found that prolonged proposed time (12 d) has significant effect on the removal efficiency of HMs. Finally, it is concluded that acid pretreatment and prolonged proposed time have enhanced the removal electrokinetic remediation of HMs which is carried out via three processes, i.e. desorption (enhanced by acidification), migration and precipitation.

Content Analysis of Heavy Metals in Fly Ash from One Shanghai Municipal Solid Waste Incineration (MSWI) Plant

2012 ◽  
Vol 531 ◽  
pp. 272-275 ◽  
Author(s):  
Hai Ying Zhang ◽  
Guo Xian Ma ◽  
Guo Liang Yuan
Keyword(s):  
Heavy Metals ◽  
Fly Ash ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Large Scale ◽  
Environmental Concern ◽  
Waste Incineration ◽  
Municipal Solid Waste Incineration ◽  
Mswi Fly Ash ◽  
Leaching Toxicity

The presence of heavy metals in municipal solid waste incineration (MSWI) fly ash is of environmental concern due to their leaching potential in landfill environments. Heavy metal content was performed on fly ash samples from a large-scale municipal solid waste incineration plant in Shanghai China. Content of heavy metals followed the decreasing sequence of Ni > Zn > Pb > Cu > Cd. As pollution of heavy metals is related to not only the content but also their leaching toxicity, further experiment of leaching concentrations of the metals is required to determine the seriousness of pollution caused by the heavy metals.

A mini-review of heavy metal recycling technologies for municipal solid waste incineration fly ash

2021 ◽  
pp. 0734242X2110039
Author(s):  
Huan Wang ◽  
Fenfen Zhu ◽  
Xiaoyan Liu ◽  
Meiling Han ◽  
Rongyan Zhang
Keyword(s):  
Fly Ash ◽  
Municipal Solid Waste ◽  
Solid Waste ◽  
Waste Incineration ◽  
Electrochemical Process ◽  
Chemical Extraction ◽  
Air Pollution Control ◽  
Municipal Solid Waste Incineration ◽  
Mswi Fly Ash ◽  
Metal Recycling

This mini-review article summarizes the available technologies for the recycling of heavy metals (HMs) in municipal solid waste incineration (MSWI) fly ash (FA). Recovery technologies included thermal separation (TS), chemical extraction (CE), bioleaching, and electrochemical processes. The reaction conditions of various methods, the efficiency of recovering HMs from MSWI FA and the difficulties and solutions in the process of technical development were studied. Evaluation of each process has also been done to determine the best HM recycling method and future challenges. Results showed that while bioleaching had minimal environmental impact, the process was time-consuming. TS and CE were the most mature technologies, but the former process was not cost-effective. Overall, it has the greatest economic potential to recover metals by CE with scrubber liquid produced by a wet air pollution control system. An electrochemical process or solvent extraction could then be applied to recover HMs from the enriched leachate. Ongoing development of TS and bioleaching technologies could reduce the treatment cost or time.

Sign in / Sign up

Export Citation Format

Share Document