Next Steps Envisaged to Improve Wing Performance of Commercial Aircrafts

Author(s):  
Josef Mertens
2020 ◽  
Vol 21 (6) ◽  
pp. 621
Author(s):  
Veerapathiran Thangaraj Gopinathan ◽  
John Bruce Ralphin Rose ◽  
Mohanram Surya

Aerodynamic efficiency of an airplane wing can be improved either by increasing its lift generation tendency or by reducing the drag. Recently, Bio-inspired designs have been received greater attention for the geometric modifications of airplane wings. One of the bio-inspired designs contains sinusoidal Humpback Whale (HW) tubercles, i.e., protuberances exist at the wing leading edge (LE). The tubercles have excellent flow control characteristics at low Reynolds numbers. The present work describes about the effect of tubercles on swept back wing performance at various Angle of Attack (AoA). NACA 0015 and NACA 4415 airfoils are used for swept back wing design with sweep angle about 30°. The modified wings (HUMP 0015 A, HUMP 0015 B, HUMP 4415 A, HUMP 4415 B) are designed with two amplitude to wavelength ratios (η) of 0.1 & 0.24 for the performance analysis. It is a novel effort to analyze the tubercle vortices along the span that induce additional flow energy especially, behind the tubercles peak and trough region. Subsequently, Co-efficient of Lift (CL), Co-efficient of Drag (CD) and boundary layer pressure gradients also predicted for modified and baseline (smooth LE) models in the pre & post-stall regimes. It was observed that the tubercles increase the performance of swept back wings by the enhanced CL/CD ratio in the pre-stall AoA region. Interestingly, the flow separation region behind the centerline of tubercles and formation of Laminar Separation Bubbles (LSB) were asymmetric because of the sweep.


2021 ◽  
Vol 37 ◽  
pp. 216-229
Author(s):  
Yung Jeh Chu ◽  
Poo Balan Ganesan ◽  
Mohamad Azlin Ali

Abstract The dragonfly wings provide insights for designing an efficient biomimetic micro air vehicle (BMAV). In this regard, this study focuses on investigating the effect of the pterostigma weight loading and its spatial location on the forewings of dragonfly by using the fluid–structure interaction simulation. This study also investigates the effect of change in the wing elasticity and density on the wing performance. The forewing, which mimics the real dragonfly wing, is flat with a 47.5 mm span and a 0.4 mm thickness. The wing was set to cruise at 3 m/s with a constant flapping motion at a frequency of 25 Hz. This study shows that a small increase of pterostigma loading (11% of wing weight) at the tip of the wing significantly improves the lift to drag ratio, CL/CD, which has 129.16% increment in comparison with no loading. The lift to drag ratio depends on the pterostigma location, pterostigma loading, elastic modulus and density. The results of this study can be used as a reference in future BMAV wing optimization design.


The Auk ◽  
1941 ◽  
Vol 58 (1) ◽  
pp. 95-95
Author(s):  
Ivan R. Tomkins
Keyword(s):  

2019 ◽  
Vol 23 ◽  
pp. 31-39
Author(s):  
Bhasha ◽  
Sanjeev Gautam ◽  
Parul Malik ◽  
Purnima Jain

Ceramic composites is playing crucial role to accomplish highly efficiently and cost effective equipment for aerospace industry. The instigation of ceramics into aircraft industry is a promising step towards virtuous future. Ceramics has a key role in innovation of highly competent material for space travel which is highly economical and environmentally sustainable. Advancement in making fuel efficient engines are necessity in present scenario due to the harmful emissions releases in the environment by burning of fuel to power up engine. The high temperature application of composites makes it very attractive for aerospace applications. This light weight material has potential to thrust spacecraft upto ten times quicker with the identical fuel consumption, therefore significantly depreciating size of vehicle and increasing travel distance. The implementation of ceramics into jet engines and turbines increase the efficiency of engine due to its lighter weight and better thermal capabilities. A jet engine employing ceramic composites has manifest 15% more fuel saving when compared to the simple nickel based alloys. Hence, ceramic composites can replace nickel based alloys which has been a promising candidate for the engines of commercial aircrafts. Some disadvantages has been also discussed that is brittle failure and limited thermal and shock resistance.


Sign in / Sign up

Export Citation Format

Share Document