Light Aided Domain Patterning and Rare Earth Emission Based Imaging of Ferroelectric Domains

Author(s):  
V. Dierolf ◽  
C. Sandmann
2018 ◽  
Vol 98 (8) ◽  
Author(s):  
Xiaoyu Wu ◽  
Kai Du ◽  
Lu Zheng ◽  
Di Wu ◽  
Sang-Wook Cheong ◽  
...  

Author(s):  
N. M. P. Low ◽  
L. E. Brosselard

There has been considerable interest over the past several years in materials capable of converting infrared radiation to visible light by means of sequential excitation in two or more steps. Several rare-earth trifluorides (LaF3, YF3, GdF3, and LuF3) containing a small amount of other trivalent rare-earth ions (Yb3+ and Er3+, or Ho3+, or Tm3+) have been found to exhibit such phenomenon. The methods of preparation of these rare-earth fluorides in the crystalline solid form generally involve a co-precipitation process and a subsequent solid state reaction at elevated temperatures. This investigation was undertaken to examine the morphological features of both the precipitated and the thermally treated fluoride powders by both transmission and scanning electron microscopy.Rare-earth oxides of stoichiometric composition were dissolved in nitric acid and the mixed rare-earth fluoride was then coprecipitated out as fine granules by the addition of excess hydrofluoric acid. The precipitated rare-earth fluorides were washed with water, separated from the aqueous solution, and oven-dried.


Author(s):  
Teruo Someya ◽  
Jinzo Kobayashi

Recent progress in the electron-mirror microscopy (EMM), e.g., an improvement of its resolving power together with an increase of the magnification makes it useful for investigating the ferroelectric domain physics. English has recently observed the domain texture in the surface layer of BaTiO3. The present authors ) have developed a theory by which one can evaluate small one-dimensional electric fields and/or topographic step heights in the crystal surfaces from their EMM pictures. This theory was applied to a quantitative study of the surface pattern of BaTiO3).


Author(s):  
T. F. Kelly ◽  
P. J. Lee ◽  
E. E. Hellstrom ◽  
D. C. Larbalestier

Recently there has been much excitement over a new class of high Tc (>30 K) ceramic superconductors of the form A1-xBxCuO4-x, where A is a rare earth and B is from Group II. Unfortunately these materials have only been able to support small transport current densities 1-10 A/cm2. It is very desirable to increase these values by 2 to 3 orders of magnitude for useful high field applications. The reason for these small transport currents is as yet unknown. Evidence has, however, been presented for superconducting clusters on a 50-100 nm scale and on a 1-3 μm scale. We therefore planned a detailed TEM and STEM microanalysis study in order to see whether any evidence for the clusters could be seen.A La1.8Sr0.2Cu04 pellet was cut into 1 mm thick slices from which 3 mm discs were cut. The discs were subsequently mechanically ground to 100 μm total thickness and dimpled to 20 μm thickness at the center.


Author(s):  
G. M. Micha ◽  
L. Zhang

RENi5 (RE: rare earth) based alloys have been extensively evaluated for use as an electrode material for nickel-metal hydride batteries. A variety of alloys have been developed from the prototype intermetallic compound LaNi5. The use of mischmetal as a source of rare earth combined with transition metal and Al substitutions for Ni has caused the evolution of the alloy from a binary compound to one containing eight or more elements. This study evaluated the microstructural features of a complex commercial RENi5 based alloy using scanning and transmission electron microscopy.The alloy was evaluated in the as-cast condition. Its chemistry in at. pct. determined by bulk techniques was 12.1 La, 3.2 Ce, 1.5 Pr, 4.9 Nd, 50.2 Ni, 10.4 Co, 5.3 Mn and 2.0 Al. The as-cast material was of low strength, very brittle and contained a multitude of internal cracks. TEM foils could only be prepared by first embedding pieces of the alloy in epoxy.


Author(s):  
V. Saikumar ◽  
H. M. Chan ◽  
M. P. Harmer

In recent years, there has been a growing interest in the application of ferroelectric thin films for nonvolatile memory applications and as a gate insulator in DRAM structures. In addition, bulk ferroelectric materials are also widely used as components in electronic circuits and find numerous applications in sensors and actuators. To a large extent, the performance of ferroelectric materials are governed by the ferroelectric domains (with dimensions in the micron to sub-micron range) and the switching of domains in the presence of an applied field. Conventional TEM studies of ferroelectric domains structures, in conjunction with in-situ studies of the domain interactions can aid in explaining the behavior of ferroelectric materials, while providing some answers to the mechanisms and processes that influence the performance of ferroelectric materials. A few examples from bulk and thin film ferroelectric materials studied using the TEM are discussed below.Figure 1 shows micrographs of ferroelectric domains obtained from undoped and Fe-doped BaTiO3 single crystals. The domain boundaries have been identified as 90° domains with the boundaries parallel to <011>.


Author(s):  
E.K. Goo ◽  
R.K. Mishra

Ferroelectric domains are twins that are formed when PZT undergoes a phase transformation from a non-ferroelectric cubic phase to a ferroelectric tetragonal phase upon cooling below ∼375°C.,1 The tetragonal phase is spontaneously polarized in the direction of c-axis, making each twin a ferroelectric domain. Thin foils of polycrystalline Pb (Zr.52Ti.48)03 were made by ion milling and observed in the Philips EM301 with a double tilt stage.


Nanoscale ◽  
2019 ◽  
Vol 11 (43) ◽  
pp. 20868-20875 ◽  
Author(s):  
Junxiong Guo ◽  
Yu Liu ◽  
Yuan Lin ◽  
Yu Tian ◽  
Jinxing Zhang ◽  
...  

We propose a graphene plasmonic infrared photodetector tuned by ferroelectric domains and investigate the interfacial effect using the finite element method.


1952 ◽  
Vol 44 (3) ◽  
pp. 442-442
Author(s):  
Frank Spedding ◽  
Harley Wilhelm ◽  
Wayne Keller et al
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document