Biphenyl Moiety for a Solvent Responsive Aryl Gold(I) Isocyanide Complex with Reactivation by Mechanical Grinding

Author(s):  
Mingoo Jin
Keyword(s):  
Author(s):  
T. E. Mitchell ◽  
P. B. Desch ◽  
R. B. Schwarz

Al3Zr has the highest melting temperature (1580°C) among the tri-aluminide intermetal1ics. When prepared by casting, Al3Zr forms in the tetragonal DO23 structure but by rapid quenching or by mechanical alloying (MA) it can also be prepared in the metastable cubic L12 structure. The L12 structure can be stabilized to at least 1300°C by the addition of copper and other elements. We report a TEM study of the microstructure of bulk Al5CuZr2 prepared by hot pressing mechanically alloyed powder.MA was performed in a Spex 800 mixer using a hardened steel container and balls and adding hexane as a surfactant. Between 1.4 and 2.4 wt.% of the hexane decomposed during MA and was incorporated into the alloy. The mechanically alloyed powders were degassed in vacuum at 900°C. They were compacted in a ram press at 900°C into fully dense samples having Vickers hardness of 1025. TEM specimens were prepared by mechanical grinding followed by ion milling at 120 K. TEM was performed on a Philips CM30 at 300kV.


TAPPI Journal ◽  
2015 ◽  
Vol 14 (3) ◽  
pp. 167-174 ◽  
Author(s):  
QIANQIAN WANG ◽  
J.Y. ZHU

Mixed office paper (MOP) pulp without deinking with an ash content of 18.1 ± 1.5% was used as raw material to produce nanofiller-paper. The MOP pulp with filler was mechanically fibrillated using a laboratory stone grinder. Scanning electron microscope imaging revealed that the ground filler particles were wrapped by cellulose nanofibrils (CNFs), which substantially improved the incorporation of filler into the CNF matrix. Sheets made of this CNF matrix were densified due to improved bonding. Specific tensile strength and modulus of the nanofiller-paper with 60-min grinding reached 48.4 kN·m/kg and 8.1 MN·m/kg, respectively, approximately 250% and 200% of the respective values of the paper made of unground MOP pulp. Mechanical grinding duration did not affect the thermal stability of the nanofiller-paper.


2014 ◽  
Vol 52 (11) ◽  
pp. 957-962 ◽  
Author(s):  
Myoung Youp Song ◽  
Young Jun Kwak ◽  
Seong Ho Lee ◽  
Hye Ryoung Park
Keyword(s):  

2020 ◽  
Author(s):  
Yunzhong Wang ◽  
Saixing Tang ◽  
Yating Wen ◽  
Shuyuan Zheng ◽  
Bing Yang ◽  
...  

<div>Persistent room-temperature phosphorescence (p-RTP) from pure organics is attractive </div><div>due to its fundamental importance and potential applications in molecular imaging, </div><div>sensing, encryption, anticounterfeiting, etc.1-4 Recently, efforts have been also made in </div><div>obtaining color-tunable p-RTP in aromatic phosphors5 and nonconjugated polymers6,7. </div><div>The origin of color-tunable p-RTP and the rational design of such luminogens, </div><div>particularly those with explicit structure and molecular packing, remain challenging. </div><div>Noteworthily, nonconventional luminophores without significant conjugations generally </div><div>possess excitation-dependent photoluminescence (PL) because of the coexistence of </div><div>diverse clustered chromophores6,8, which strongly implicates the possibility to achieve </div><div>color-tunable p-RTP from their molecular crystals assisted by effective intermolecular </div><div>interactions. Here, inspirited by the highly stable double-helix structure and multiple </div><div>hydrogen bonds in DNA, we reported a series of nonconventional luminophores based on </div><div>hydantoin (HA), which demonstrate excitation-dependent PL and color-tunable p-RTP </div><div>from sky-blue to yellowish-green, accompanying unprecedentedly high PL and p-RTP </div><div>efficiencies of up to 87.5% and 21.8%, respectively. Meanwhile, the p-RTP emissions are </div><div>resistant to vigorous mechanical grinding, with lifetimes of up to 1.74 s. Such robust, </div><div>color-tunable and highly efficient p-RTP render the luminophores promising for varying </div><div>applications. These findings provide mechanism insights into the origin of color-tunable </div><div>p-RTP, and surely advance the exploitation of efficient nonconventional luminophores.</div>


1994 ◽  
Vol 6 (1) ◽  
pp. 31
Author(s):  
Hiroko Yamamoto ◽  
Kouji Ishizuka ◽  
Kazuya Oguri ◽  
Yoshitake Nishi
Keyword(s):  

2019 ◽  
Vol 21 (27) ◽  
pp. 14728-14733 ◽  
Author(s):  
Xiao Ma ◽  
Jipeng Li ◽  
Chensheng Lin ◽  
Guoliang Chai ◽  
Yangbin Xie ◽  
...  

For a pyridinium-based emitter with fluorescence–phosphorescence dual emission, mechanical grinding induces phosphorescence disappearance and mechanical pressing induces extraordinary phosphorescence enhancement.


Fuel ◽  
2021 ◽  
Vol 299 ◽  
pp. 120892
Author(s):  
Giada Innocenti ◽  
Daniel J. Benkeser ◽  
Julia E. Dase ◽  
Xenia Wirth ◽  
Carsten Sievers ◽  
...  
Keyword(s):  
Coal Ash ◽  

2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Young-Jae Jin ◽  
Hyosang Park ◽  
Byung-Chun Moon ◽  
Jae Hong Kim ◽  
Wang-Eun Lee ◽  
...  

AbstractThe piezochromic fluorescence (FL) of a distyrylpyrazine derivative, 2,3-diisocyano-5,6-distyrylpyrazine (DSP), was investigated in this study. Depending on the recrystallization method, DSP afforded two different crystals with green and orange FL emission. The orange color FL emission crystal (O-form) was easily converted to the green color FL emission one (G-form) by manual grinding. The G-form was also converted to a slightly different orange color FL emission crystal (RO-form) by a weak UV irradiation. When the RO-form was ground again, the G-form was regenerated. The FL colors changed between the G- and RO-forms over several ten times by repeated mechanical grinding and UV irradiation. The FL, UV–visible, 1H-NMR and XRD results showed that the O (or RO)-to-G transformation induced by mechanical stress results from the change of degree of molecular stacking from dense molecular stacking structure to relatively loose molecular stacking structure, whereas the G-to-RO reconversion by UV irradiation results from return to dense molecular stacking structure again due to lattice movement (lattice slipping) allowed by photocycloaddition in solid-state.


2006 ◽  
Vol 416 (1-2) ◽  
pp. 239-244 ◽  
Author(s):  
Myoung-Youp Song ◽  
Daniel R. Mumm ◽  
Sung-Nam Kwon ◽  
Seong-Hyeon Hong ◽  
Jong-Soo Bae

Sign in / Sign up

Export Citation Format

Share Document