Performance Improvement for PMSG Tidal Power Conversion System with Fuzzy Gain Supervisor Passivity-Based Current Control

Author(s):  
Youcef Belkhier ◽  
Abdelyazid Achour ◽  
Rabindra Nath Shaw ◽  
Ankush Ghosh
Energies ◽  
2021 ◽  
Vol 14 (13) ◽  
pp. 3862
Author(s):  
Hyun Shin ◽  
Sang Heon Chae ◽  
Eel-Hwan Kim

In isolated areas such as islands with small power grids, the BESS (Battery energy storage system) can supply the standard voltage and frequency to the power system to achieve 100% of renewable sharing. In addition, the installation of additional BESS may be required in the microgrid due to technical limitations such as redundant operation and manufacturer specifications. Thus, the BESSs in a microgrid can be split into main and sub BESSs which play a role as the main source and auxiliary services, respectively. Generally, the ratio of unbalance current in microgrid system tends to be high, because of inherently unbalanced single phase load distribution. However, because the capacity of BESS is calculated under balanced conditions, the PCS (Power conversion system) of BESS may stop protecting its switching device from a single phase overcurrent in actual operation. From this perspective, this paper proposes that the sub BESSs perform dual current control to supply the unbalanced current instead of the main BESS. In the simulation result of the proposed method, the current unbalance rate of the main ESS has been reduced by about 26%. Through the proposed control scheme, it is possible to prevent an unexpected single phase overload of the main BESS in the microgrid.


Energies ◽  
2021 ◽  
Vol 14 (8) ◽  
pp. 2178
Author(s):  
Luigi Danilo Tornello ◽  
Salvatore Foti ◽  
Mario Cacciato ◽  
Antonio Testa ◽  
Giacomo Scelba ◽  
...  

A technique to improve the performance of grid-connected induction motors by exploiting an auxiliary winding set is proposed in this paper. This auxiliary winding features the same distribution of the main winding, although with a reduced number of turns and it is fed by an inverter a fraction of the power in comparison with the rated size of the induction motor. As shown in the paper, through the auxiliary winding, it is possible to set the machine power factor, increasing the efficiency of the power conversion system and mitigating speed oscillations due to torque disturbances. A mitigation of the grid current peaks due to motor start-up is obtainable. First, the proposed technique is theoretically introduced, then a feasibility assessment is accomplished by simulations.


Author(s):  
Eun-Cheol Lee ◽  
Zhihai Liu

Recently, Ruddlesden–Popper two-dimensional (2D) perovskite solar cells (PSCs) have been intensively studied, owing to their high power conversion efficiency (PCE) and excellent long-term stability. In this work, we improved the...


Sign in / Sign up

Export Citation Format

Share Document