Determination of Lateral Load Carrying Capacity of Pile Group Located Near Contaminated Sand Slope Using Plaxis 3D

2021 ◽  
pp. 225-234
Author(s):  
Chaitanya Kumar Singh ◽  
S. Biswas ◽  
A. K. Sinha
Keyword(s):  
Carrying Capacity ◽  
Pile Group ◽  
Lateral Load ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
Plaxis 3D

scholarly journals Determination of Load-Carrying Capacity of C-Profile Glued Ti-Al Column under Temperature Environment

Materials ◽  
2021 ◽  
Vol 14 (11) ◽  
pp. 3013
Author(s):  
Leszek Czechowski
Keyword(s):  
Carrying Capacity ◽  
Tensile Tests ◽  
Discrete Models ◽  
Image Correlation ◽  
Load Carrying Capacity ◽  
Lagrange Equations ◽  
Load Carrying ◽  
Different Temperatures ◽  
Influence Of Temperature On

The paper deals with an examination of the behaviour of glued Ti-Al column under compression at elevated temperature. The tests of compressed columns with initial load were performed at different temperatures to obtain their characteristics and the load-carrying capacity. The deformations of columns during tests were registered by employing non-contact Digital Image Correlation Aramis® System. The numerical computations based on finite element method by using two different discrete models were carried out to validate the empirical results. To solve the problems, true stress-logarithmic strain curves of one-directional tensile tests dependent on temperature both for considered metals and glue were implemented to software. Numerical estimations based on Green–Lagrange equations for large deflections and strains were conducted. The paper reveals the influence of temperature on the behaviour of compressed C-profile Ti-Al columns. It was verified how the load-carrying capacity of glued bi-metal column decreases with an increase in the temperature increment. The achieved maximum loads at temperature 200 °C dropped by 2.5 times related to maximum loads at ambient temperature.

STABILITY PROBLEMS OF STEEL‐CONCRETE MEMBERS COMPOSED OF HIGH‐STRENGTH MATERIALS

2010 ◽  
Vol 16 (3) ◽  
pp. 352-362 ◽  
Author(s):  
Zdeněk Kala ◽  
Libor Puklický ◽  
Abayomi Omishore ◽  
Marcela Karmazínová ◽  
Jindřich Melcher
Keyword(s):  
Theoretical Analysis ◽  
Experimental Research ◽  
Carrying Capacity ◽  
High Strength ◽  
Statistical Characteristics ◽  
Load Carrying Capacity ◽  
Limit States ◽  
Load Carrying ◽  
Geometrical Imperfections

The presented paper deals with the stochastic analysis of the ultimate limit states of steel‐concrete building members. The load carrying capacity of steel‐concrete columns, comprising of steel profiles encased in high strength concrete, in compression is analyzed. The first part of the paper lists assumptions for the determination of the theoretical load carrying capacity of the column. Principles of elasticity and plasticity are used to determine stresses in the concrete and steel sections. Statistical characteristics of input material and geometrical imperfections are listed. Results of the theoretical analysis are then compared with results of experimental research. Statistical characteristics of obtained results of the theoretical analysis were verified using statistical characteristics obtained from experimental research. Numerical simulation LHS and Monte Carlo methods, which take into account the influences of variability of input imperfections, were employed. The influence of the utilization of the plastic reserve in the determination of the load carrying capacity of the analysed strut is shown. The influence of the initial geometric imperfections of initial strut curvature on the load carrying capacity is also presented. Santrauka Straipsnyje pateikta plienbetonio pastatu elementu didžiausiu ribiniu būkliu stochastine analize, analizuojama plienbetonio kolonu, sudarytu iš plieniniu profiliuočiu, padengtu didelio stiprio betonu, laikomoji galia gniuždant. Pirmoje straipsnio dalyje išvardytos kolonos teorines laikomosios galios nustatymo prielaidos. Tamprumo ir plastiškumo principai taikyti itempiams betono ir plieno skerspjūviuose nustatyti. Nustatytos medžiagu ir geometriniu defektu statistines charakteristikos, teorines analizes rezultatai palyginti su eksperimentiniu tyrimu rezultatais. Teorines analizes metu gautu rezultatu statistines charakteristikos patikrintos taikant iš eksperimentiniu tyrimu gautus statistinius rodiklius. Pritaikytas skaitinis modeliavimas LHS ir Monte Karlo metodais, kurie ivertina pradiniu defektu kintamumo itaka. Parodyta plastiškumo atsargos naudojimo itaka, nustatant analizuojamojo statramsčio laikomaja galia, pateikta pradinio statramsčio išlinkio pirminiu geometriniu defektu itaka laikomajai galiai.

A Numerical Investigation of Laterally Loaded Steel Fin Pile Foundations

2020 ◽  
Author(s):  
Te Pei ◽  
Tong Qiu ◽  
Jeffrey A. Laman
Keyword(s):  
Carrying Capacity ◽  
Load Transfer ◽  
Lateral Load ◽  
Steel Plates ◽  
Pile Foundations ◽  
Load Carrying Capacity ◽  
Element Analysis ◽  
Fea Model ◽  
Load Carrying ◽  
Maximum Improvement

Abstract The present study comprehensively evaluates the improvement in lateral load-carrying capacity of steel pipe piles by adding steel plates (fins) at grade level. This configuration of steel fin pile foundations (SFPFs) is effective for applications where high lateral loads are encountered and rapid pile installation is advantageous. An integrated finite element analysis (FEA) was conducted. The FEA utilized an Abaqus model, first developed to account for the nonlinear soil-pile interaction, and then calibrated and validated against well-documented experimental and filed tests in the literature. The validated FEA model was subsequently used to conduct a parametric study to understand the effect of fin geometry on the load transfer mechanism and the response of SFPFs subjected to lateral loading at pile head. The behavior of SFPFs at different displacement levels and load levels was studied. The effect of the relative density of soil on the performance of SFPFs was also investigated. Based on the numerical simulation results, the optimal fin width for maximum improvement in lateral load-carrying capacity was suggested and the underlining mechanism affecting the efficiency of fins was explained.

Mechanical properties of confirmat screws corner joints made of native wood and wood-based composites

2019 ◽  
Vol 105 ◽  
pp. 76-84
Author(s):  
NADEŽDA LANGOVÁ ◽  
PAVOL JOŠČÁK
Keyword(s):  
Mechanical Properties ◽  
Carrying Capacity ◽  
Limit State ◽  
Calculated Data ◽  
Statistical Processing ◽  
Load Carrying Capacity ◽  
Load Carrying ◽  
Characteristic Values ◽  
State Method

Mechanical Properties of Confirmat Screws Corner Joints Made of Native Wood and Wood-Based Composites. The aim of this investigation was to design and determine the mechanical properties of confirmat screws corner joints made of native wood and wood-based composites. The objective of the study was to ascertain the stiffness and load carrying capacity of joints that differed in the diameter and length of confirmat type screw, as well as in the kind of materials. The results include statistical processing of measured and calculated data, and evaluation of the influence of selected factors on mechanical properties. The results are applied to the calculation of the characteristic values of the properties and to the determination of the equations for their calculation for other values of the selected factors. The characteristic values are used for the evaluation of the joints according to the limit state method.

Sign in / Sign up

Export Citation Format

Share Document