Fabrication and Evaluation of Optimized Parametric Condition During EDM Machining of Al-CSA Composite Using Taguchi Orthogonal Array

The market demand of bio-fuel is 11,8 billion litters based on recent reported data. Hence, with the high demand of bio-fuel, the bio-fuel production utilizing rice husk can be one of the solutions. Beside, bio-oil can be produced by pyrolysis process utilizing rice husk as the feedstock. In this research, the optimization condition in producing bio-oil from rice husk by catalytic pyrolysis process was studied. The effect of catalyst type (H-β, H-Y, HZSM-5), catalyst loading (1wt%, 5wt%, 12wt%), temperature (400-500°C) and flow rate (60-100ml/min) were investigated through repetitive experiments using L9 Taguchi Orthogonal Array. The highest liquid yield of 38wt% was obtained at the optimum conditions with temperature of 500°C with nitrogen flow rate of 60ml/min and 12wt% of H-ZSM-5.

Download Full-text

Investigating the Effects of Blending Ratio and Injection Parameters on the Tensile Properties of Glass Fiber-Filled Nylon 66 Composite Gear

Applied Mechanics and Materials ◽

10.4028/www.scientific.net/amm.548-549.43 ◽

2014 ◽

Vol 548-549 ◽

pp. 43-47

Author(s):

Nik Mizamzul Mehat ◽

Noor Syuhada Zakarria ◽

Shahrul Kamaruddin

Keyword(s):

Glass Fiber ◽

Tensile Properties ◽

Waste Disposal ◽

Orthogonal Array ◽

Limited Resources ◽

Elongation At Break ◽

Taguchi Orthogonal Array ◽

Injection Parameters ◽

The Impact ◽

Plastic Products

The recycling of plastic products is gaining widespread attention because of its significance in the reduction of petroleum consumption and in the conservation of limited resources. It is also an effective method of handling plastic waste, as opposed to traditional landfill and incineration waste disposal methods. This study attempts to find a method by which to manage the increasing amount of PA66-GF waste generated by the gear industry through the recycling method. By adopting the L27 Taguchi orthogonal array, S/N ratio and ANOVA are conducted to evaluate the impact of recycled materials on various compositions. The different settings of injection parameters on the gears’ Young’s modulus and elongation at break are also identified and examined.

Download Full-text

Designing Hybrid Onconase Nanocarriers for Mesothelioma Therapy: A Taguchi Orthogonal Array and Multivariate Component Driven Analysis

Molecular Pharmaceutics ◽

10.1021/mp500403b ◽

2014 ◽

Vol 11 (10) ◽

pp. 3671-3683 ◽

Cited By ~ 31

Author(s):

Rakesh K. Tekade ◽

Susanne R. Youngren-Ortiz ◽

Haining Yang ◽

Rahul Haware ◽

Mahavir B. Chougule

Keyword(s):

Orthogonal Array ◽

Taguchi Orthogonal Array

Download Full-text

An Experimental Analysis on Beam Structural with Taguchi Orthogonal Array

International Journal of Innovative Technology and Exploring Engineering - Special Issue ◽

10.35940/ijitee.l1109.10812s19 ◽

2019 ◽

Vol 8 (12S) ◽

pp. 441-445

Keyword(s):

Orthogonal Array ◽

Optimization Method ◽

Statistical Technique ◽

Optimization Techniques ◽

Beam Structure ◽

Taguchi Optimization ◽

Taguchi Optimization Method ◽

Taguchi Orthogonal Array ◽

Different Levels

Taguchi optimization method is a statistical technique to optimize the selected factors and will improvise the quality of compositions. The aim of this paper is to define effective optimization techniques to identify the effective orthogonal array combination using experiments in the beam structure. The Taguchi L9 array has experimented in this study with three different levels and four parameters. After the completion of the experiments, the results are compared with fully factorial methods. The output will be in the form of S/N ratio and graphs. The best-optimized combination is found for minimizing the number of experiments. The size of the beam structure is 1250mm*150mm*150mm.

Download Full-text