Effect of interruptions on the kinetics of cracks under low cycle loading in rigid regime

1990 ◽  
Vol 22 (6) ◽  
pp. 926-929
Author(s):  
V. I. Erofeev
Keyword(s):  
Cycle Loading ◽  
Kinetics Of

Kinetics of a crack with varied rigidity under conditions of low-cycle loading

1976 ◽  
Vol 8 (10) ◽  
pp. 1217-1221
Author(s):  
V. Ya. Yablonko ◽  
V. I. Erofeev
Keyword(s):  
Cycle Loading ◽  
Kinetics Of

scholarly journals Kinetics of deformation and damage accumulation in concentration zones with nonisothermal low-cycle loading

1985 ◽  
Vol 17 (8) ◽  
pp. 1050-1056
Author(s):  
A. G. Kazantsev ◽  
A. P. Gusenkov ◽  
A. N. Chernykh
Keyword(s):  
Damage Accumulation ◽  
Cycle Loading ◽  
Kinetics Of

scholarly journals Anomalies in the elastic properties of metals at very high cycle loading and kinetics of damage accumulation

2017 ◽  
pp. 63-70
Author(s):  
M.V. Bannikov ◽  
◽  
I.A. Bannikova ◽  
S.V. Uvarov ◽  
O.B. Naimark ◽  
...  
Keyword(s):  
Elastic Properties ◽  
Damage Accumulation ◽  
Cycle Loading ◽  
Kinetics Of ◽  
Very High

scholarly journals Evaluation of fatigue life of polycrystalline structural alloys

2018 ◽  
Vol 226 ◽  
pp. 03021
Author(s):  
Ivan A. Volkov ◽  
Leonid A. Igumnov ◽  
Aleksandr A. Ipatov
Keyword(s):  
Plastic Deformation ◽  
Damage Accumulation ◽  
Failure Process ◽  
Block Type ◽  
Elastoplastic Behavior ◽  
Evolutionary Equations ◽  
Defining Relations ◽  
Cycle Loading ◽  
Main Effects ◽  
Kinetics Of

A mathematical model describing the processes of elastoplastic deformation and damage accumulation under low-cycle loading has been developed, based on the viewpoint of mechanics of damaged media (MDM). The MDM model consists of three interrelated parts: defining relations describing elastoplastic behavior of the materials, taking into account its dependence on the failure process; evolutionary equations describing the kinetics of damage accumulation; strength criteria of the damaged material. In order to assess the reliability and scope of applicability of the defining relations of mechanics of damaged media, the processes of plastic deformation and damage accumulation in variety of structural steels in low-cycle tests have been numerically analyzed, and numerical results obtained have been compared with the data of full-scale experiments. It is shown that the presented model of mechanics of damaged media adequately describes, both qualitatively and quantitatively, with accuracy, necessary for practical calculations, the main effects of the processes of plastic deformation and damage accumulation in structural alloys under block-type non-stationary non-symmetrical low-cycle loading.

Study of the regularities of resistance to deformation and damage accumulation under irregular low cycle loading

2021 ◽  
Vol 87 (11) ◽  
pp. 55-63
Author(s):  
M. M. Gadenin
Keyword(s):  
Elastoplastic Deformation ◽  
Damage Accumulation ◽  
Low Cycle Fatigue ◽  
Functional Dependence ◽  
Experimental Studies ◽  
Similar Data ◽  
Cycle Loading ◽  
Cyclic Elastoplastic Deformation ◽  
Loading Modes ◽  
Kinetics Of

The results of computation and experimental studies of changes in the regularities of the strain resistance and damage accumulation in conditions of the irregular low cycle loading are presented and compared with similar data for a regular cyclic elastoplastic deformation at the same loading. The irregular mode of low cycle loading implemented in the study is adopted in the form of an equiprobable distribution of changes in the stress amplitudes within a given range between maximum and minimum levels at the symmetric form of the cycles. This mode was reproduced on test equipment through introduction of the corresponding functional dependence of changes in the stress amplitude in the cycles into the control program. The data on a cycle-by-cycle kinetics of both cyclic and unilaterally accumulated strains obtained under irregular mode of loading were recorded in a databank and then compared with the data for a regular loading. This provided the possibility of their analytical description by the corresponding equations of state with the correction of the parameters of the diagrams of cyclic elastoplastic deformation taking into account the conditions of irregularity of loading modes. The results of the experiments are presented in the form of diagrams of the tests modes, curves of a low cycle fatigue of the studied material at the soft and hard loading modes, diagrams of a cycle-by-cycle kinetics of the cyclic and accumulated strains at the regular and irregular modes, and also as kinetic diagrams of damages accumulation for these conditions. Using the summation criteria expressed through the deformation characteristics of accumulated damage, it is shown that taking into account change in the character of the strain development under irregular low-cycle loading, the criterion dependences can be used to assess the durability and compare it with the similar data under regular modes when accepting the condition of attaining the limiting state.

Electrode corrosion potential kinetics of steel samples in sea water under low-cycle loading

1978 ◽  
Vol 14 (1) ◽  
pp. 64-67
Author(s):  
A. V. Kobzaruk ◽  
G. V. Karpenko
Keyword(s):  
Corrosion Potential ◽  
Sea Water ◽  
Cycle Loading ◽  
Kinetics Of

Direct observations of radiation-enhanced transformations in glass

1983 ◽  
Vol 41 ◽  
pp. 354-355
Author(s):  
J. F. DeNatale ◽  
D. G. Howitt
Keyword(s):  
Glass Matrix ◽  
Diffusion Mechanism ◽  
Bubble Formation ◽  
Silicate Glasses ◽  
Phase Decomposition ◽  
Direct Observations ◽  
Thin Foils ◽  
Oxygen Bubble ◽  
Electron Energy Loss ◽  
Kinetics Of

The electron irradiation of silicate glasses containing metal cations produces various types of phase separation and decomposition which includes oxygen bubble formation at intermediate temperatures figure I. The kinetics of bubble formation are too rapid to be accounted for by oxygen diffusion but the behavior is consistent with a cation diffusion mechanism if the amount of oxygen in the bubble is not significantly different from that in the same volume of silicate glass. The formation of oxygen bubbles is often accompanied by precipitation of crystalline phases and/or amorphous phase decomposition in the regions between the bubbles and the detection of differences in oxygen concentration between the bubble and matrix by electron energy loss spectroscopy cannot be discerned (figure 2) even when the bubble occupies the majority of the foil depth.The oxygen bubbles are stable, even in the thin foils, months after irradiation and if van der Waals behavior of the interior gas is assumed an oxygen pressure of about 4000 atmospheres must be sustained for a 100 bubble if the surface tension with the glass matrix is to balance against it at intermediate temperatures.

Irradiation behavior of pyrolytic silicon carbide

1983 ◽  
Vol 41 ◽  
pp. 72-73
Author(s):  
R. J. Lauf
Keyword(s):  
Silicon Carbide ◽  
Fission Products ◽  
Thermodynamics And Kinetics ◽  
Neutron Fluences ◽  
Fuel Particles ◽  
Sic Coatings ◽  
Irradiation Behavior ◽  
Kinetics Of ◽  
Htgr Fuel

Fuel particles for the High-Temperature Gas-Cooled Reactor (HTGR) contain a layer of pyrolytic silicon carbide to act as a miniature pressure vessel and primary fission product barrier. Optimization of the SiC with respect to fuel performance involves four areas of study: (a) characterization of as-deposited SiC coatings; (b) thermodynamics and kinetics of chemical reactions between SiC and fission products; (c) irradiation behavior of SiC in the absence of fission products; and (d) combined effects of irradiation and fission products. This paper reports the behavior of SiC deposited on inert microspheres and irradiated to fast neutron fluences typical of HTGR fuel at end-of-life.

Sign in / Sign up

Export Citation Format

Share Document