Structure and short-term creep resistance of alloy TsM2A after nitriding

1983 ◽  
Vol 25 (2) ◽  
pp. 108-111
Author(s):  
M. Yu. Belomyttsev ◽  
B. G. Belyakov ◽  
M. N. Kryanina
Metals ◽  
2018 ◽  
Vol 8 (12) ◽  
pp. 1072 ◽  
Author(s):  
Hao-Wei Wu ◽  
Tai-Jung Wu ◽  
Ren-Kae Shiue ◽  
Leu-Wen Tsay

As-received Gr.91 steel tube was normalized at either 940 or 1060 °C for 1 h, followed by Ar-assisted cooling to room temperature, then tempered at 760 °C for 2 h. Those samples were designated as 940NT or 1060NT samples. An infrared heating system was used to simulate HAZ microstructures in the weld, which included over-tempering (OT) and partial transformation (PT) zones. The results of short-term creep tests showed that normalizing at higher temperature improved the creep resistance of the Gr.91 steel. By contrast, welding thermal cycles would shorten the creep life of the Gr.91 steel. Among the tested samples in each group, the PT samples had the shortest life to rupture, especially the 940NT-PT sample. The microstructures of the PT samples comprised of fine lath martensite and ferrite subgrains with carbides decorating the grain and subgrain boundaries. Excessive dislocation recovery, rapid coalescence of refined martensite laths, and growth of ferrite subgrains were responsible for the poorer creep resistance of the PT samples relative to those of the other samples.


1979 ◽  
Vol 21 (5) ◽  
pp. 357-358
Author(s):  
O. A. Bannykh ◽  
I. V. Doronin ◽  
V. I. Makarenko ◽  
V. A. Golikov ◽  
E. A. Tsukrov

2020 ◽  
Vol 98 (Supplement_3) ◽  
pp. 39-40
Author(s):  
Kendi Tjardes ◽  
Katy Lippolis

Abstract One hundred four Angus calves were ranked by gender, BW, age, and dam parity, and assigned to 1 of 4 pre-weaning treatments: 1) nose flaps for 7-d prior to weaning (NF), 2) traditional weaning (TRAD), 3) traditional weaning and creep feed for 3-wk prior to weaning (TRADC), or 4) nose flaps for 7-d prior to weaning and creep feed for 3-wk prior to weaning (NFC). Cow-calf pairs were housed in dry lot pens on d -28. From d -21 to 0, calves in creep treatments were provided free choice access to creep feed. Nose flaps were placed on d -7, and calves were weaned on d 0. Calves were vaccinated and dewormed on d -21 and 0. There was no difference (P ≥ 0.97) in calf BW on d -28 or -21. During the 7-d period that nose flaps were placed, NFC calves had greater (P ≤ 0.0001) ADG than NF and TRAD calves, and tended to have greater (P ≤ 0.10) ADG than TRADC calves. At weaning on d 0, TRADC and NFC calves tended to have greater BW (P = 0.07) and had greater overall change in BW (P < 0.0001) during the pre-weaning period than TRAD and NF calves. Additionally, there was a greater (P ≤ 0.001) increase in BW of NFC and TRADC cows during the pre-weaning period compared to NF and TRAD cows. From d -21 to 0 there was no differences (P > 0.41) in plasma concentrations for Bovine Viral Diarrhea Virus (BVD). By d 14, the TRADC calves had the greatest plasma concentrations for BVD (P < 0.04). Therefore, providing short-term creep feed prior to placing nose flaps can improve pre-weaning calf and cow performance compared to traditional and nose flap weaning without creep feed supplementation, however, did not improve response to vaccination.


2021 ◽  
Vol 149 ◽  
pp. 106562
Author(s):  
Yidong Gan ◽  
Matthieu Vandamme ◽  
Yu Chen ◽  
Erik Schlangen ◽  
Klaas van Breugel ◽  
...  

2006 ◽  
Vol 519-521 ◽  
pp. 1041-1046 ◽  
Author(s):  
Brian Wilshire ◽  
H. Burt ◽  
N.P. Lavery

The standard power law approaches widely used to describe creep and creep fracture behavior have not led to theories capable of predicting long-term data. Similarly, traditional parametric methods for property rationalization also have limited predictive capabilities. In contrast, quantifying the shapes of short-term creep curves using the q methodology introduces several physically-meaningful procedures for creep data rationalization and prediction, which allow straightforward estimation of the 100,000 hour stress rupture values for the aluminum alloy, 2124.


2012 ◽  
Vol 73 ◽  
pp. 144-152 ◽  
Author(s):  
Shengzhi Li ◽  
Zumrat Eliniyaz ◽  
Lanting Zhang ◽  
Feng Sun ◽  
Yinzhong Shen ◽  
...  

2018 ◽  
Vol 25 (3) ◽  
pp. 713-722 ◽  
Author(s):  
Seen Chan Kim ◽  
Jae-Hyeok Shim ◽  
Woo-Sang Jung ◽  
Yoon Suk Choi

2010 ◽  
Vol 527 (29-30) ◽  
pp. 7505-7509 ◽  
Author(s):  
Huiran Cui ◽  
Feng Sun ◽  
Ke Chen ◽  
Lanting Zhang ◽  
Rongchun Wan ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document