Correlation between cyclic plastic strain zone size and the fatigue fracture rate of 15Kh2MFA steel at low temperatures

1982 ◽  
Vol 14 (7) ◽  
pp. 887-891
Author(s):  
L. R. Botvina ◽  
G. V. Klevtsov ◽  
V. M. Markochev ◽  
A. P. Bobrinskii
Keyword(s):  
Plastic Strain ◽  
Fatigue Fracture ◽  
Low Temperatures ◽  
Fracture Rate ◽  
Zone Size ◽  
Cyclic Plastic ◽  
15Kh2mfa Steel ◽  
Cyclic Plastic Strain ◽  
Plastic Strain Zone

Elastic-Plastic Finite Element Simulation and Fatigue Life Prediction for Beam and Elbow Under Cyclic Loading

2007 ◽  
Author(s):  
Xian-Kui Zhu ◽  
Brian N. Leis
Keyword(s):  
Finite Element ◽  
Fatigue Life ◽  
Cyclic Loading ◽  
Plastic Strain ◽  
Kinematic Hardening ◽  
Kinematic Model ◽  
Cyclic Plastic ◽  
Hardening Models ◽  
Critical Location ◽  
Cyclic Plastic Strain

Work hardening and Bauschinger effects on plastic deformation and fatigue life for a beam and an elbow under cyclic loading are examined using finite element analysis (FEA). Three typical material plastic hardening models, i.e. isotropic, kinematic and combined isotropic/kinematic hardening models are adopted in the FEA calculations. Based on the FEA results of cyclic stress and strain at a critical location and using an energy-based fatigue damage parameter, the fatigue lives are predicted for the beam and elbow. The results show that (1) the three material hardening models determine similar stress at the critical location with small differences during the cyclic loading, (2) the isotropic model underestimates the cyclic plastic strain and overestimates the fatigue life, (3) the kinematic model overestimates the cyclic plastic strain and underestimates the fatigue life, and (4) the combined model predicts the intermediate cyclic plastic strain and reasonable fatigue life.

On the Cyclic Deformation Response and Microstructural Mechanisms of ECAPed and ARBed Copper - an Overview

2011 ◽  
Vol 683 ◽  
pp. 55-68 ◽  
Author(s):  
Charles C.F. Kwan ◽  
Zhi Rui Wang
Keyword(s):  
Plastic Deformation ◽  
Plastic Strain ◽  
Severe Plastic Deformation ◽  
Mechanical Behaviour ◽  
Cyclic Deformation ◽  
Mechanical Load ◽  
Deformation Behaviour ◽  
Cyclic Plastic ◽  
Deformation Response ◽  
Cyclic Plastic Strain

With the increase of interest in using ultra-fine and nano-grained metals for structural purposes, the need to build on the knowledge pool regarding the response and behaviour of those metals under a mechanical load becomes more vital. However, it is well known that, especially for this type of materials such as the ECAPed and ARBed materials, the thermo-mechanical history affects the mechanical behaviour of the product strongly. Although ECAP and ARB are different techniques under the category of severe plastic deformation, similarities in their cyclic deformation response is observed from time to time. Specifically, the microstructural mechanisms involved in accommodating cyclic plastic strain in these two types of materials is seemingly comparable. The similarities arise from the similar microstructures in the majority of the volume of the bulk. In this report, the cyclic deformation response, and the related microstructural mechanisms of ECAPed copper will be discussed first and those of ARBed second. A comparison between ECAPed copper and ARBed copper will then be performed. Furthermore, the differences due to the unique features of ARBed material will be discussed. Lastly, the reasons behind the observed similarities in cyclic deformation behaviour and the related micro-mechanisms for metals process with the two different techniques will also be explored.

Sign in / Sign up

Export Citation Format

Share Document