A transverse shear deformation theory for homogeneous monoclinic plates

1992 ◽  
Vol 94 (3-4) ◽  
pp. 195-220 ◽  
Author(s):  
K. P. Soldatos
Keyword(s):  
Shear Deformation ◽  
Transverse Shear ◽  
Deformation Theory ◽  
Shear Deformation Theory ◽  
Transverse Shear Deformation

Nonlinear Dynamic FE Simulation of Smart Piezolaminated Structures Based on First- and Third-Order Transverse Shear Deformation Theory

2009 ◽  
Vol 79-82 ◽  
pp. 1313-1316 ◽  
Author(s):  
Ruediger Schmidt ◽  
Thang Duy Vu
Keyword(s):  
Shear Deformation ◽  
Transverse Shear ◽  
Deformation Theory ◽  
Shear Deformation Theory ◽  
Transverse Shear Deformation ◽  
Third Order ◽  
Element Analysis ◽  
Plate Elements ◽  
Piezoelectric Layers ◽  
Time Histories

This paper deals with nonlinear finite element analysis of smart structures with integrated piezoelectric layers. Two geometrically nonlinear finite plate elements incorporating piezoelectric layers are applied based either on first- or third-order transverse shear deformation theory. Nonlinear strain-displacement relations are used that are valid for small strains and moderate rotations. Numerical tests are performed for the time histories of the tip displacement and sensor output voltage of a thin beam with a piezoelectric patch bonded to the surface.

Finite element bending analysis of symmetric and non-symmetric functionally graded sandwich beams using a novel parabolic shear deformation theory

2021 ◽  
pp. 146442072110050
Author(s):  
Mohamed-Ouejdi Belarbi ◽  
Abdelhak Khechai ◽  
Aicha Bessaim ◽  
Mohammed-Sid-Ahmed Houari ◽  
Aman Garg ◽  
...  
Keyword(s):  
Finite Element ◽  
Finite Element Model ◽  
Shear Deformation ◽  
Transverse Shear ◽  
Deformation Theory ◽  
Shear Deformation Theory ◽  
Element Model ◽  
Beam Element ◽  
Functionally Graded ◽  
Sandwich Beams

In this paper, the bending behavior of functionally graded single-layered, symmetric and non-symmetric sandwich beams is investigated according to a new higher order shear deformation theory. Based on this theory, a novel parabolic shear deformation function is developed and applied to investigate the bending response of sandwich beams with homogeneous hardcore and softcore. The present theory provides an accurate parabolic distribution of transverse shear stress across the thickness and satisfies the zero traction boundary conditions on the top and bottom surfaces of the functionally graded sandwich beam without using any shear correction factors. The governing equations derived herein are solved by employing the finite element method using a two-node beam element, developed for this purpose. The material properties of functionally graded sandwich beams are graded through the thickness according to the power-law distribution. The predictive capability of the proposed finite element model is demonstrated through illustrative examples. Four types of beam support, i.e. simply-simply, clamped-free, clamped–clamped, and clamped-simply, are used to study how the beam deflection and both axial and transverse shear stresses are affected by the variation of volume fraction index and beam length-to-height ratio. Results of the numerical analysis have been reported and compared with those available in the open literature to evaluate the accuracy and robustness of the proposed finite element model. The comparisons with other higher order shear deformation theories verify that the proposed beam element is accurate, presents fast rate of convergence to the reference results and it is also valid for both thin and thick functionally graded sandwich beams. Further, some new results are reported in the current study, which will serve as a benchmark for future research.

Effect of Stress Concentration on Laminated Plates

2012 ◽  
Vol 29 (2) ◽  
pp. 241-252 ◽  
Author(s):  
A. S. Sayyad ◽  
Y. M. Ghugal
Keyword(s):  
Stress Concentration ◽  
Shear Deformation ◽  
Transverse Shear ◽  
Deformation Theory ◽  
Shear Deformation Theory ◽  
Laminated Plates ◽  
Shear Stresses ◽  
Normal Strain ◽  
Concentrated Load ◽  
Transverse Shear Stresses

AbstractThis paper deals with the problem of stress distribution in orthotropic and laminated plates subjected to central concentrated load. An equivalent single layer trigonometric shear deformation theory taking into account transverse shear deformation effect as well as transverse normal strain effect is used to obtain in-plane normal and transverse shear stresses through the thickness of plate. Governing equations and boundary conditions of the theory are obtained using the principle of virtual work. A simply supported plate with central concentrated load is considered for the numerical analysis. Anomalous behavior of inplane normal and transverse shear stresses is observed due to effect of stress concentration compared to classical plate theory and first order shear deformation theory.

scholarly journals A Refined Simple First-Order Shear Deformation Theory for Static Bending and Free Vibration Analysis of Advanced Composite Plates

Materials ◽  
2019 ◽  
Vol 12 (15) ◽  
pp. 2385 ◽  
Author(s):  
Hoang Nam Nguyen ◽  
Tran Thi Hong ◽  
Pham Van Vinh ◽  
Nguyen Dinh Quang ◽  
Do Van Thom
Keyword(s):  
Free Vibration ◽  
Shear Deformation ◽  
Transverse Shear ◽  
Deformation Theory ◽  
Shear Deformation Theory ◽  
Composite Plates ◽  
Shear Stresses ◽  
Transverse Shear Strain ◽  
First Order ◽  
Advanced Composite

A refined simple first-order shear deformation theory is developed to investigate the static bending and free vibration of advanced composite plates such as functionally graded plates. By introducing the new distribution shape function, the transverse shear strain and shear stress have a parabolic distribution across the thickness of the plates, and they equal zero at the surfaces of the plates. Hence, the new refined theory needs no shear correction factor. The Navier solution is applied to investigate the static bending and free vibration of simply supported advanced composite plates. The proposed theory shows an improvement in calculating the deflections and frequencies of advanced composite plates. The formulation and transformation of the present theory are as simple as the simple first-order shear deformation. The comparisons of deflection, axial stresses, transverse shear stresses, and frequencies of the plates obtained by the proposed theory with published results of different theories are carried out to show the efficiency and accuracy of the new theory. In addition, some discussions on the influence of various parameters such as the power-law index, the slenderness ratio, and the aspect ratio are carried out, which are useful for the design and testing of advanced composite structures.

A Unified Shear Deformation Theory for the Bending of Isotropic, Functionally Graded, Laminated and Sandwich Beams and Plates

2017 ◽  
Vol 09 (01) ◽  
pp. 1750007 ◽  
Author(s):  
Atteshamuddin S. Sayyad ◽  
Yuwaraj M. Ghugal
Keyword(s):  
Boundary Conditions ◽  
Shear Deformation ◽  
Transverse Shear ◽  
Deformation Theory ◽  
Virtual Work ◽  
Shear Deformation Theory ◽  
Laminated Composite ◽  
Present Theory ◽  
Functionally Graded ◽  
Shear Stresses

In this paper, a displacement-based unified shear deformation theory is developed for the analysis of shear deformable advanced composite beams and plates. The theory is developed with the inclusion of parabolic (PSDT), trigonometric (TSDT), hyperbolic (HSDT) and exponential (ESDT) shape functions in terms of thickness coordinate to account for the effect of transverse shear deformation. The in-plane displacements consider the combined effect of bending rotation and shear rotation. The use of parabolic shape function in the present theory leads to the Reddy’s theory, but trigonometric, hyperbolic and exponential functions are first time used in the present displacement field. The present theory is accounted for an accurate distribution of transverse shear stresses through the thickness of plate, therefore, it does not require problem dependent shear correction factor. Governing equations and associated boundary conditions of the theory are derived from the principle of virtual work. Navier type closed-form solutions are obtained for simply supported boundary conditions. To verify the global response of the present theory it is applied for the bending of both one-dimensional (beams) and two-dimensional (plates) functionally graded, laminated composite and sandwich structures. The present results are compared with exact elasticity solution and other higher order shear deformation theories to verify the accuracy and efficiency of the present theory.

Finite Element Analysis on Modal Parameters of Anisotropic Laminated Plates

1988 ◽  
Vol 110 (4) ◽  
pp. 473-477 ◽  
Author(s):  
C. Z. Xiao ◽  
D. X. Lin ◽  
F. Ju
Keyword(s):  
Finite Element ◽  
Shear Deformation ◽  
Transverse Shear ◽  
Natural Frequencies ◽  
Dynamic Properties ◽  
Shear Deformation Theory ◽  
Laminated Plates ◽  
Mode Shapes ◽  
Transverse Shear Deformation ◽  
Element Technique

This paper is concerned with the finite element technique for predicting the dynamic properties of anisotropic fiber-reinforced composite laminated plates. Considering the effect of transverse shear deformation, a higher order shear deformation theory which satisifes the zero shear stress conditions at the upper and bottom surfaces is assumed. The natural frequencies and mode shapes of a rectangular plate with all free edges are obtained by finite element method and the modal damping values by finite damped element technique. An equivalent stiffness method is introduced to reduce computation time. Four different theoretical predictions of natural frequencies and damped values of a laminated plate are compared with experimental results. Discussions on the effect of transverse shear deformation to the dynamic properties of composite plates are given.

scholarly journals An exponential-trigonometric higher order shear deformation theory (HSDT) for bending, free vibration, and buckling analysis of functionally graded materials (FGMs) plates

2020 ◽  
Vol 29 ◽  
pp. 096369351987573 ◽  
Author(s):  
Yamna Belkhodja ◽  
Djamel Ouinas ◽  
Fatima Zohra Zaoui ◽  
Hamida Fekirini
Keyword(s):  
Free Vibration ◽  
Shear Deformation ◽  
Functionally Graded Materials ◽  
Transverse Shear ◽  
Deformation Theory ◽  
Shear Deformation Theory ◽  
Higher Order ◽  
Functionally Graded ◽  
Shear Stresses ◽  
Graded Materials

Two assumptions have been made based on by this proposed theory, which come from recently developed exponential–trigonometric shape function for transverse shear deformation effect and a simple higher order shear deformation theory for plate, based on a constraint between two rotational displacements of axis parallel to the plate midplane, about the axes x, y Cartesian coordinates system, which caused fewer unknown number. For the application of this method, a displacement field extended as only bending membrane for transverse displacement is used, a governing equations of motion as a result are determined according to Hamilton’s principle, and simplified using Navier analytical solutions, as well as the transverse shear stresses effect that satisfied the stress-free boundary conditions on the simply supported plate free faces as a parabolic variation along the thickness are taken into account. A functionally graded materials plates are chosen for the parametric study, where the plates are functionally graded continuously in materials through the plate thickness as a function of power law or exponential form. The aim of this study is to analyze the bending, free vibration as well as the buckling mechanical behaviors, where the results are more focused on the investigation of different parameters such as the volume fraction index, geometric ratios, frequency modes, in-plane compressive load parameters and material properties effects on the deflection, stresses, natural frequencies, and critical buckling load, which are validated in terms of accuracy and efficiency with other plate theories results found in the literature.

Sign in / Sign up

Export Citation Format

Share Document