Prebiotic polymerization: Oxidative polymerization of 2,3-dimercapto-l-propanol on the surface of iron(III) hydroxide oxide

1995 ◽  
Vol 25 (1-3) ◽  
pp. 53-60 ◽  
Author(s):  
Arthur L. Weber
Keyword(s):  
Oxidative Polymerization ◽  
Prebiotic Polymerization

Relation Between Local Structure, Electric Dipole and Charge Carrier Dynamics in DHICA Melanin, a Model for Biocompatible Semiconductors

2019 ◽  
Author(s):  
Micaela Matta ◽  
Alessandro Pezzella ◽  
Alessandro Troisi
Keyword(s):  
Electronic Structure ◽  
Degrees Of Freedom ◽  
Structural Model ◽  
Computational Study ◽  
Oxidative Polymerization ◽  
Radical Scavenging ◽  
Charge Carriers ◽  
Electronic Charge ◽  
Polymer Semiconductors ◽  
Synthetic Pigments

<div><div><div><p>Eumelanins are a family of natural and synthetic pigments obtained by oxidative polymerization of their natural precursors: 5,6 dihydroxyindole and its 2-carboxy derivative (DHICA). The simultaneous presence of ionic and electronic charge carriers makes these pigments promising materials for applications in bioelectronics. In this computational study we build a structural model of DHICA melanin considering the interplay between its many degrees of freedom, then we examine the electronic structure of representative oligomers. We find that a non-vanishing dipole along the polymer chain sets this system apart from conventional polymer semiconductors, determining its electronic structure, reactivity toward oxidation and localization of the charge carriers. Our work sheds light on previously unnoticed features of DHICA melanin that not only fit well with its radical scavenging and photoprotective properties, but open new perspectives towards understanding and tuning charge transport in this class of materials.<br></p></div></div></div>

Fabrication of Conductive Textile via Chemical Oxidative Polymerization of Aniline on Polyester Cloth

2018 ◽  
Author(s):  
alireza razaghi
Keyword(s):  
Acidic Solution ◽  
Oxidative Polymerization ◽  
Morphological Structure ◽  
Infrared Spectrometry ◽  
Aniline Monomer ◽  
Polyester Textile ◽  
Conductive Polyaniline ◽  
Conductive Textile ◽  
Polymerization Conditions ◽  
Aniline Polymerization

In this research aniline polymerization conditions were optimized in presence of pre-treated polyester textile to achieve as high electrical conductivity as 100 S/Cm. Alkaline activation of the polyester textile was followed by immersion in to aqueous acidic solution of aniline monomer. Then the oxidant solution was used to initiate the polymerization. Finally, the prepared product was washed and dried prior to ant test. Functional groups were studied by Fourie-transformed infrared spectrometry (FTIR) from the surface of the polyaniline coated textile. Also, morphological structure of synthesized conductive polyaniline was studied by scanning electron microscopy (SEM). The synthesized cloth was used in a closed circuit in order to light up alight emitting diode to emphasis the conductivity of the textile and fibres that synthesised by this method.

Fabrication of Conductive Textile via Chemical Oxidative Polymerization of Aniline on Polyester Cloth

2018 ◽  
Author(s):  
alireza razaghi
Keyword(s):  
Acidic Solution ◽  
Oxidative Polymerization ◽  
Morphological Structure ◽  
Infrared Spectrometry ◽  
Aniline Monomer ◽  
Polyester Textile ◽  
Conductive Polyaniline ◽  
Conductive Textile ◽  
Polymerization Conditions ◽  
Aniline Polymerization

In this research aniline polymerization conditions were optimized in presence of pre-treated polyester textile to achieve as high electrical conductivity as 100 S/Cm. Alkaline activation of the polyester textile was followed by immersion in to aqueous acidic solution of aniline monomer. Then the oxidant solution was used to initiate the polymerization. Finally, the prepared product was washed and dried prior to ant test. Functional groups were studied by Fourie-transformed infrared spectrometry (FTIR) from the surface of the polyaniline coated textile. Also, morphological structure of synthesized conductive polyaniline was studied by scanning electron microscopy (SEM). The synthesized cloth was used in a closed circuit in order to light up alight emitting diode to emphasis the conductivity of the textile and fibres that synthesised by this method.

scholarly journals Preparation and Gas Sensing Properties of PANI/SnO2 Hybrid Material

Polymers ◽  
2021 ◽  
Vol 13 (9) ◽  
pp. 1360
Author(s):  
Qiaohua Feng ◽  
Huanhuan Zhang ◽  
Yunbo Shi ◽  
Xiaoyu Yu ◽  
Guangdong Lan
Keyword(s):  
Hybrid Material ◽  
Room Temperature ◽  
Tin Dioxide ◽  
Gas Adsorption ◽  
Gas Sensing ◽  
Oxidative Polymerization ◽  
Environmental Pollutants ◽  
Decomposition Temperature ◽  
Benzene Vapor ◽  
Thermo Gravimetric Analyzer

A sensor operating at room temperature has low power consumption and is beneficial for the detection of environmental pollutants such as ammonia and benzene vapor. In this study, polyaniline (PANI) is made from aniline under acidic conditions by chemical oxidative polymerization and doped with tin dioxide (SnO2) at a specific percentage. The PANI/SnO2 hybrid material obtained is then ground at room temperature. The results of scanning electron microscopy show that the prepared powder comprises nanoscale particles and has good dispersibility, which is conducive to gas adsorption. The thermal decomposition temperature of the powder and its stability are measured using a differential thermo gravimetric analyzer. At 20 °C, the ammonia gas and benzene vapor gas sensing of the PANI/SnO2 hybrid material was tested at concentrations of between 1 and 7 ppm of ammonia and between 0.4 and 90 ppm of benzene vapor. The tests show that the response sensitivities to ammonia and benzene vapor are essentially linear. The sensing mechanisms of the PANI/SnO2 hybrid material to ammonia and benzene vapors were analyzed. The results demonstrate that doped SnO2 significantly affects the sensitivity, response time, and recovery time of the PANI material.

scholarly journals NIR responsive tumor vaccine in situ for photothermal ablation and chemotherapy to trigger robust antitumor immune responses

2021 ◽  
Vol 19 (1) ◽  
Author(s):  
Lirong Zhang ◽  
Jingjing Zhang ◽  
Lixia Xu ◽  
Zijian Zhuang ◽  
Jingjin Liu ◽  
...  
Keyword(s):  
Immune Responses ◽  
Tumor Vaccine ◽  
Oxidative Polymerization ◽  
Delivery Mode ◽  
Tumor Treatment ◽  
One Pot ◽  
Photothermal Ablation ◽  
Prolonged Retention ◽  
The One

Abstract Background Therapeutic tumor vaccine (TTV) that induces tumor-specific immunity has enormous potentials in tumor treatment, but high heterogeneity and poor immunogenicity of tumor seriously impair its clinical efficacy. Herein, a novel NIR responsive tumor vaccine in situ (HA-PDA@IQ/DOX HG) was prepared by integrating hyaluronic acid functionalized polydopamine nanoparticles (HA-PDA NPs) with immune adjuvants (Imiquimod, IQ) and doxorubicin (DOX) into thermal-sensitive hydrogel. Results HA-PDA@IQ NPs with high photothermal conversion efficiency (41.2%) and T1-relaxation efficiency were using HA as stabilizer by the one-pot oxidative polymerization. Then, HA-PDA@IQ loaded DOX via π-π stacking and mixed with thermal-sensitive hydrogel to form the HA-PDA@IQ/DOX HG. The hydrogel-confined delivery mode endowed HA-PDA@IQ/DOX NPs with multiple photothermal ablation performance once injection upon NIR irradiation due to the prolonged retention in tumor site. More importantly, this mode enabled HA-PDA@IQ/DOX NPs to promote the DC maturation, memory T cells in lymphatic node as well as cytotoxic T lymphocytes in spleen. Conclusion Taken together, the HA-PDA@IQ/DOX HG could be served as a theranostic tumor vaccine for complete photothermal ablation to trigger robust antitumor immune responses.

scholarly journals Role of the Anilinium Ion on the Selective Polymerization of Anilinium 2-Acrylamide-2-methyl-1-propanesulfonate

Polymers ◽  
2021 ◽  
Vol 13 (14) ◽  
pp. 2349
Author(s):  
Alain Salvador Conejo-Dávila ◽  
Marco Armando Moya-Quevedo ◽  
David Chávez-Flores ◽  
Alejandro Vega-Rios ◽  
Erasto Armando Zaragoza-Contreras
Keyword(s):  
Cyclic Voltammetry ◽  
Optical Properties ◽  
Thermal Properties ◽  
Free Radical ◽  
1H Nmr ◽  
Molecular Interactions ◽  
13C Nmr ◽  
Oxidative Polymerization ◽  
Cyclic Voltammetry Analysis

The development of anilinium 2-acrylamide-2-methyl-1-propanesulfonate (Ani-AMPS) monomer, confirmed by 1H NMR, 13C NMR, and FTIR, is systematically studied. Ani-AMPS contains two polymerizable functional groups, so it was submitted to selective polymerization either by free-radical or oxidative polymerization. Therefore, poly(anilinium 2-acrylamide-2-methyl-1-propanesulfonic) [Poly(Ani-AMPS)] and polyaniline doped with 2-acrylamide-2-methyl-1-propanesulfonic acid [PAni-AMPS] can be obtained. First, the acrylamide polymer, poly(Ani-AMPS), favored the π-stacking of the anilinium group produced by the inter- and intra-molecular interactions and was studied utilizing 1H NMR, 13C NMR, FTIR, and UV-Vis-NIR. Furthermore, poly(Ani-AMPS) fluorescence shows quenching in the presence of Fe2+ and Fe3+ in the emission spectrum at 347 nm. In contrast, the typical behavior of polyaniline is observed in the cyclic voltammetry analysis for PAni-AMPS. The optical properties also show a significant change at pH 4.4. The PAni-AMPS structure was corroborated through FTIR, while the thermal properties and morphology were analyzed utilizing TGA, DSC (except PAni-AMPS), and FESEM.

Oxidative polymerization of aniline using NaClO2 as an oxidant

2007 ◽  
Vol 61 (10) ◽  
pp. 2011-2014 ◽  
Author(s):  
Xiaoxuan Li ◽  
Xingwei Li
Keyword(s):  
Oxidative Polymerization

Probing the performance of imide linked micro-porous polymers for enhanced CO2 gas adsorption applications

2021 ◽  
Author(s):  
Narendran Rajendran ◽  
Ali A. Husain ◽  
Saad Makhseed
Keyword(s):  
Surface Area ◽  
Gas Adsorption ◽  
Oxidative Polymerization ◽  
Porous Polymers ◽  
Bet Surface Area ◽  
Co2 Gas

Three new carbazole containing cross-linked polymers namely AH-Poly, TM-PDA-Poly and TMB-PDA-Poly were designed and successfully synthesized by an oxidative polymerization protocol. The prepared AH-Poly showed a specific BET surface area...

scholarly journals Chemical Oxidative Polymerization of Methylene Blue: Reaction Mechanism and Aspects of Chain Structure

Polymers ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 2188
Author(s):  
Yaroslav O. Mezhuev ◽  
Igor Y. Vorobev ◽  
Ivan V. Plyushchii ◽  
Efrem G. Krivoborodov ◽  
Alexander A. Artyukhov ◽  
...  
Keyword(s):  
Methylene Blue ◽  
Oxidative Polymerization ◽  
Chain Structure ◽  
Charge Transfer Complexes ◽  
Significant Weight Loss ◽  
Chemical Oxidative Polymerization ◽  
First Order ◽  
Initial Stage ◽  
Blue Reaction ◽  
Heating Up

The kinetic regularities of the initial stage of chemical oxidative polymerization of methylene blue under the action of ammonium peroxodisulfate in an aqueous medium have been established by the method of potentiometry. It was shown that the methylene blue polymerization mechanism includes the stages of chain initiation and growth. It was found that the rate of the initial stage of the reaction obeys the kinetic equation of the first order with the activation energy 49 kJ × mol−1. Based on the proposed mechanism of oxidative polymerization of methylene blue and the data of MALDI, EPR, and IR spectroscopy methods, the structure of the polymethylene blue chain is proposed. It has been shown that polymethylene blue has a metallic luster, and its electrical conductivity is probably the result of conjugation over extended chain sections and the formation of charge transfer complexes. It was found that polymethylene blue is resistant to heating up to a temperature of 440 K and then enters into exothermic transformations without significant weight loss. When the temperature rises above 480 K, polymethylene blue is subject to endothermic degradation and retains 75% of its mass up to 1000 K.

Preparation of polymer nanocomposite via the polymerization of pyrrole:biphenyldisulfonic acid:pyrrole as two-monomer-connected precursor on MoS2 for electrochemical energy storage

Nanoscale ◽  
2021 ◽  
Author(s):  
Wonbin Kim ◽  
Hong-Joon Lee ◽  
Seung Jo Yoo ◽  
Trinh Kim Cuc ◽  
Zubair Ahmad ◽  
...  
Keyword(s):  
Energy Storage ◽  
Molybdenum Disulfide ◽  
Oxidative Polymerization ◽  
Polymer Nanocomposite ◽  
Electrochemical Energy Storage ◽  
High Crystallinity ◽  
Electrochemical Energy

We prepare poly(pyrrole:biphenyldisulfonic acid:pyrrole (Py:BPDSA:Py)) nanocomposite of molybdenum disulfide (MoS2), P(Py:BPDSA:Py)-MoS2, with high crystallinity. The composite is synthesized by oxidative polymerization of Py:BPDSA:Py as the two-monomer-connected precursors (TMCP) linked by...

Sign in / Sign up

Export Citation Format

Share Document