Crystalline barrier oxide films formed on aluminium in an aqueous solution of ammonium dihydrogen phosphate

1986 ◽  
Vol 5 (5) ◽  
pp. 543-544 ◽  
Author(s):  
K. Kobayashi ◽  
K. Shimizu ◽  
D. Teranishi
Keyword(s):  
Aqueous Solution ◽  
Oxide Films ◽  
Dihydrogen Phosphate ◽  
Ammonium Dihydrogen Phosphate

scholarly journals Fire extinguishing performance and mechanism for several typical dry water extinguishing agents

RSC Advances ◽  
2021 ◽  
Vol 11 (17) ◽  
pp. 9827-9836
Author(s):  
Quan Wang ◽  
Fengqi Wang ◽  
Chengxiao Li ◽  
Zhimin Li ◽  
Rui Li
Keyword(s):  
Aqueous Solution ◽  
Dihydrogen Phosphate ◽  
Ammonium Dihydrogen Phosphate ◽  
Temperature Changes ◽  
Fire Extinguishing ◽  
Dry Water ◽  
Performance And Mechanism

Four new dry water fire extinguishing agents (FEAs) were developed by hydrophobic SiO2 and aqueous solution. Among them, dry water FEA with ammonium dihydrogen phosphate has the best extinguishing effect via temperature changes by thermocouples.

The Effect of Phosphatic Composite on Magnesium Phosphate Cement Performance

2014 ◽  
Vol 809-810 ◽  
pp. 477-484
Author(s):  
Zhao Qing Qi ◽  
Hong Tao Wang ◽  
Jun Liang Dang ◽  
Shi Hao Zhang ◽  
Jian Hua Ding
Keyword(s):  
Setting Time ◽  
Potassium Dihydrogen Phosphate ◽  
Magnesium Phosphate ◽  
Dihydrogen Phosphate ◽  
Ammonium Dihydrogen Phosphate ◽  
Hydrogen Phosphate ◽  
Sodium Dihydrogen Phosphate ◽  
Disodium Hydrogen Phosphate ◽  
Potassium Dihydrogen ◽  
Sodium Dihydrogen

The capacity of 10%, 30%, and 50% ammonium dihydrogen phosphate were replaced with an equal amount of three phosphate (potassium dihydrogen phosphate, sodium dihydrogen phosphate, disodium hydrogen phosphate) respectively. Magnesium phosphate cement was made by phosphate of replaced, which strength, setting time, fluidity, hydration temperature, and the hydration products was researched. The results show that: MPC was made that replaced with the equal amount of three kind of phosphate, which has good mechanical properties. Setting time and fluidity change along with the replacment. Three kind of phosphate replace ammonium dihydrogen phosphate, which change the hydration process of MPC. When ammonium dihydrogen phosphate was replaced by an equal amount of disodium hydrogen phosphate, the temperature of hydration is only 69.4 °C. XRD showed that the diffraction peaks of composite’s magnesium phosphate cement increases.

Growth and Characterization of Ammonium Dihydrogen Phosphate (ADP) Doped with H3BO3 Crystals Grown by Slow Evaporation Method

2016 ◽  
Vol 675-676 ◽  
pp. 573-576 ◽  
Author(s):  
Pratya Thongpanit ◽  
Weerapong Chewpraditkul ◽  
Nakarin Pattanaboonmee
Keyword(s):  
Boric Acid ◽  
Temperature Stability ◽  
Hardness Measurement ◽  
Dihydrogen Phosphate ◽  
Ammonium Dihydrogen Phosphate ◽  
Slow Evaporation ◽  
X Ray Diffraction ◽  
X Ray ◽  
Evaporation Method

Ammonium dihydrogen phosphate (ADP) crystals is very interesting due to its nonlinear optical property. This study investigated on improving of material for academic use by adding boric acid to modify ADP crystals. Slow evaporation method in aqueous solutions of pure ADP and ADP doped with three concentrations of H3BO3 as 0.1, 1.0, 5.0 %wt were studied. The grown crystals were confirmed tetragonal structure by powder X-ray diffraction studies. The FTIR spectrum analysis presented various functional groups of boron in three conditions of doped ADP. TGA study was comfirned the temperature stability at 220 °C for both pure and doped ADP crytals. The machanical stress was analyzed by Vicker’s hardness measurement. The results of this analysis showed boric acid doped 1.0 %wt had superior machanical stress from 10 to 75 grams. ADP doped with boric acid at 1.0 %wt was accepted in all test properties.

Sign in / Sign up

Export Citation Format

Share Document