Determination of the content of bound acetic acid in cellulose acetates by the method of IR spectroscopy

Background: Curcumin is a major ingredient in turmeric (Curcuma longa L., Zingiberaceae), which has important activities such as anti-tumor, anti-inflammatory, antioxidant, anti-ischemia, protection of gastric mucosa etc,. Curcumin can be considered as a biological marker of turmeric and turmeric products. Objectives: Developing an HPLC method for quantification of curcumin in turmeric powder and turmeric - honey ball pills; applying this method for products on the market. Materials and methods: turmeric powder and turmeric - honey ball pills collected in Thua Thien Hue province. After optimization process, the method was validated and applied to evaluate the content of curcumin. Results: The chromatography analysis was performed with: Zorbaz Eclipse XDB-C18 (150 × 4.6 nm; 5 µm); Mobile phase: acetonitril: 2% acetic acid (45:55), Flow rate was kept constant at 1.0 ml/min; Detector PDA (420 nm). The method was validated for the HPLC system compatibility, specificity, linearity range, precision and accuracy; the recovery greater than 98%. Conclusion: The developed HPLC method can determine curcumin in turmeric powder and turmeric - honey ball pills. Key words: Curcumin, turmeric powder, turmeric-honey ball pills, quantitative determination, HPLC

Download Full-text

HPLC-UV Method for Determination of Famotidine from Pharmaceutical Products

Revista de Chimie ◽

10.37358/rc.18.2.6093 ◽

2018 ◽

Vol 69 (2) ◽

pp. 297-299

Author(s):

Adriana Nita ◽

Delia Mirela Tit ◽

Lucian Copolovici ◽

Carmen Elena Melinte (Frunzulica) ◽

Dana Maria Copolovici ◽

...

Keyword(s):

Acetic Acid ◽

Quantitative Analysis ◽

Linear Response ◽

Mobile Phase ◽

Acetic Acid Solution ◽

Pharmaceutical Products ◽

Quantification Limit ◽

Validation Parameters ◽

Hplc Analyses

The aim of this study was to develop and validate a rapid, accurate, and exact method for the quantitative determination of famotidine in pharmaceutical products. The HPLC analyses were performed by using a mobile phase containing methanol:1% acetic acid solution=30:7 (v/v), at a flow rate of 0.4 mL/min.The total time of the method was 10 min, and the retention time of famotidine was 4.16 min. The detection was evaluated at l=267 nm. The method has been validated by using different validation parameters. The linear response of the detector for famotidine peak area was observed at concentrations ranging from 0.1 to 0.0001 mg mL-1 , resulting in a correlation coefficient of 0.99998. The values of the detection limit and of the quantification limit are 0.00048 mg mL-1 and 0.00148 mg mL-1, respectively. The method proposed allowed accurate (with a relative error of less than 2%) and precise (RSD values less than 2.0%) determination of famotidine content in pharmaceutical products and can be used for its rapid quantitative analysis.

Download Full-text

Development and Validation of an Eco-Friendly and Low-Cost Method for the Quantification of Cefepime Hydrochloride in Powder for Injectable Solution Using Infrared (IR) Spectroscopy

Current Analytical Chemistry ◽

10.2174/1573411014666180704122816 ◽

2020 ◽

Vol 16 (4) ◽

pp. 456-464

Author(s):

Danilo F. Rodrigues ◽

Hérida R.N. Salgado

Keyword(s):

Ir Spectroscopy ◽

Low Cost ◽

Pharmaceutical Preparations ◽

Potassium Bromide ◽

Pharmaceutical Products ◽

Injectable Formulation ◽

Ich Guidelines ◽

Lactam Ring ◽

Development And Validation

Background: A simple, eco-friendly and low-cost Infrared (IR) method was developed and validated for the analysis of Cefepime Hydrochloride (CEF) in injectable formulation. Different from some other methods, which employ organic solvents in the analyses, this technique does not use these types of solvents, removing large impacts on the environment and risks to operators. Objective: This study aimed at developing and validating a green analytical method using IR spectroscopy for the determination of CEF in pharmaceutical preparations. Methods: The method was validated according to ICH guidelines and the quantification of CEF was performed in the spectral region absorbed at 1815-1745 cm-1 (stretching of the carbonyl group of β- lactam ring). Results: The validated method showed to be linear (r = 0.9999) in the range of 0.2 to 0.6 mg/pellet of potassium bromide, as well as for the parameters of selectivity, precision, accuracy, robustness and Limits of Detection (LOD) and Quantification (LOQ), being able to quantify the CEF in pharmaceutical preparations. The CEF content obtained by the IR method was 103.86%. Conclusion: Thus, the method developed may be an alternative in the quality control of CEF sample in lyophilized powder for injectable solution, as it presented important characteristics in the determination of the pharmaceutical products, with low analysis time and a decrease in the generation of toxic wastes to the environment.

Download Full-text