Creep-induced local lattice parameter changes in a monocrystalline nickel-base superalloy

During an investigation of recrystallization in the γ′ precipitation hardened nickel-base superalloy Udimet 700 many examples were found of fringe contrast at coherent matrix-γ′ interfaces. The properties of the fringes are those characteristic of so-called “δ-fringes”, as discussed by Gevers et al. A similar phenomenon has been observed in Ni-6.71 wt. % Al, and related to the formation of δ fringes by a tetragonal distortion of the γ matrix at the γ-γ′ interface. The interface fringes in Udimet 700 show surprisingly pronounced contrast despite the small difference in lattice parameter between γ and γ′ (<0.1% vs 0.5% in binary Ni-Al).

Download Full-text

Coherency loss in γ' precipitates in nickel-base superalloy

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100075014 ◽

1983 ◽

Vol 41 ◽

pp. 244-245

Author(s):

R. A. Ricks ◽

Angus J. Porter

Keyword(s):

Lattice Mismatch ◽

Lattice Parameter ◽

Nickel Base Superalloy ◽

Large Size ◽

The Matrix ◽

Nimonic 80A ◽

Interfacial Dislocations ◽

Nickel Base ◽

Coherency Loss ◽

Nimonic 115

During a recent investigation concerning the growth of γ' precipitates in nickel-base superalloys it was observed that the sign of the lattice mismatch between the coherent particles and the matrix (γ) was important in determining the ease with which matrix dislocations could be incorporated into the interface to relieve coherency strains. Thus alloys with a negative misfit (ie. the γ' lattice parameter was smaller than the matrix) could lose coherency easily and γ/γ' interfaces would exhibit regularly spaced networks of dislocations, as shown in figure 1 for the case of Nimonic 115 (misfit = -0.15%). In contrast, γ' particles in alloys with a positive misfit could grow to a large size and not show any such dislocation arrangements in the interface, thus indicating that coherency had not been lost. Figure 2 depicts a large γ' precipitate in Nimonic 80A (misfit = +0.32%) showing few interfacial dislocations.

Download Full-text

Dependence of Intergranular Fracture on Boundary Topography and Cohesion

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100071193 ◽

1973 ◽

Vol 31 ◽

pp. 150-151

Author(s):

J. E. Doherty ◽

A. F. Giamei ◽

B. H. Kear ◽

C. W. Steinke

Keyword(s):

Grain Boundary ◽

Room Temperature ◽

Nickel Base Superalloy ◽

Boundary Shear ◽

Room Temperature Ductility ◽

Solid Solution Matrix ◽

Nickel Base ◽

Solution Matrix ◽

Different Levels ◽

Base Superalloy

Recently we have been investigating a class of nickel-base superalloys which possess substantial room temperature ductility. This improvement in ductility is directly related to improvements in grain boundary strength due to increased boundary cohesion through control of detrimental impurities and improved boundary shear strength by controlled grain boundary micros true tures.For these investigations an experimental nickel-base superalloy was doped with different levels of sulphur impurity. The micros tructure after a heat treatment of 1360°C for 2 hr, 1200°C for 16 hr consists of coherent precipitates of γ’ Ni3(Al,X) in a nickel solid solution matrix.

Download Full-text

Characterization of Coherent, Ordered Precipitates in Nickel-Base Alloys

Proceedings, annual meeting, Electron Microscopy Society of America ◽

10.1017/s0424820100071168 ◽

1973 ◽

Vol 31 ◽

pp. 144-145

Author(s):

B. H. Kear ◽

J. M. Oblak

Keyword(s):

Stable Phase ◽

Nickel Base Superalloy ◽

Alloy 718 ◽

Commercial Alloy ◽

Precipitate Morphology ◽

Continuous Precipitation ◽

Nickel Base ◽

Base Superalloy ◽

Strengthening Precipitate

A nickel-base superalloy is essentially a Ni/Cr solid solution hardened by additions of Al (Ti, Nb, etc.) to precipitate a coherent, ordered phase. In most commercial alloy systems, e.g. B-1900, IN-100 and Mar-M200, the stable precipitate is Ni3 (Al,Ti) γ′, with an LI2structure. In A lloy 901 the normal precipitate is metastable Nis Ti3 γ′ ; the stable phase is a hexagonal Do2 4 structure. In Alloy 718 the strengthening precipitate is metastable γ″, which has a body-centered tetragonal D022 structure.Precipitate MorphologyIn most systems the ordered γ′ phase forms by a continuous precipitation re-action, which gives rise to a uniform intragranular dispersion of precipitate particles. For zero γ/γ′ misfit, the γ′ precipitates assume a spheroidal.

Download Full-text