Fatty Acid Profile Analysis of Membrane Phospholipids of Isolated Soybean Lipid Bodies

1989 ◽  
Vol 66 (9) ◽  
pp. 1309-1311 ◽  
Author(s):  
T. D. Simpson
1984 ◽  
Vol 18 ◽  
pp. 215A-215A ◽  
Author(s):  
R Uauy ◽  
M T Saitúa ◽  
X Cassorla ◽  
C Duque ◽  
A Gil

2017 ◽  
Vol 19 (3) ◽  
pp. 196
Author(s):  
Kamini Kamini ◽  
Pipih Suptijah ◽  
Joko Santoso ◽  
Sugeng Heri Suseno

Abstract<br />The catfish viscera fat, is cathfish processing by-products, has potential to be used as a source of raw<br />material for production of fish oil. This study aimed to analyze the value of proximate, heavy metal content<br />and fatty acid profile of catfish viscera fat (Pangasius hypopthalmus) and characterized fish oil extracted by<br />dry rendering in various temperature and time than compared it to fish oil extracted by stove heating to<br />obtain the best treatment. Proximate, heavy metal residue, and the fatty acid profile analysis were conducted<br />for characterizing catfish viscera fat. Fish oil extraction was conducted by dry rendering in various<br />temperatures of 50, 60, 70, 80 °C for 1, 2, and 3 hours. Fish oil quality was determined by the chemical<br />characteristics i.e. PV, FFA, anisidin and TOTOX. The results of the study showed that fat content of catfish<br />fat viscera was 88.19 %, the heavy metals content was below SNI standart to be consumed, and fatty acid<br />profile composition was SFA&gt;MUFA&gt;PUFA. The highest fatty acid content was oleic acid. The best fish oil<br />quality was resulted on temperature extraction of 50°C for 2 hours with yield value, PV, FFA, anisidin, and<br />TOTOX were 45.17 %, 2.77 meq/kg, 0.83 %, 2.86 meq/kg, 8.39 meq/kg respectively. This result was not<br />significantly different with fish oil extracted by the stove heating expect for yield and PV were 80.11% and<br />6.52 meq/kg, respectively.<br /><br />


PLoS ONE ◽  
2015 ◽  
Vol 10 (10) ◽  
pp. e0140103 ◽  
Author(s):  
Noemí Araceli Rivera Casado ◽  
María del Carmen Montes Horcasitas ◽  
Refugio Rodríguez Vázquez ◽  
Fernando José Esparza García ◽  
Josefina Pérez Vargas ◽  
...  

Aquaculture ◽  
2012 ◽  
Vol 334-337 ◽  
pp. 89-100 ◽  
Author(s):  
Daria Ezgeta-Balić ◽  
Mirjana Najdek ◽  
Melita Peharda ◽  
Maria Blažina

Foods ◽  
2020 ◽  
Vol 9 (8) ◽  
pp. 1006
Author(s):  
María José Beriain ◽  
María Teresa Murillo-Arbizu ◽  
Kizkitza Insausti ◽  
María Victoria Sarriés ◽  
Inmaculada Gómez

The aim of this work was to set the quality standards of the chistorra de Navarra, a raw-cured Spanish traditional meat product, through the study of its sensory and physicochemical features. The quality of chistorra samples, coming from 50 different artisan producers, were assessed during three sessions by expert assessors (n = 15). In the first session, instrumental colour (L*, a*, and b*) and appearance and odour parameters were evaluated in the raw products. In the second session, texture and flavour attributes were determined in cooked products. Finally, in the third session, the best 10 classified chistorras from the first and second sessions were sensorially evaluated and sampled for further analysis: texture (Warner Bratzler and texture profile analysis (TPA)), chemical composition, and fatty acid profile. The chistorras with the highest sensory scores had high shear force values, flavour intensity, and fat/hydroxyproline ratio. The average fatty acid profile obtained for chistorra de Navarra was: 42% saturated fatty acids (SFA), 45% monounsaturated fatty acids (MUFA), and 13% polyunsaturated fatty acids (PUFA), which was similar to the one found in other raw-cured sausages. Considering the sensory evaluation, chistorra was defined as a product with an intense orange colour, and with high resistance value in the initial bite. It was also characterised by a high juiciness and tenderness, aroma, and meat flavour. In mouth, the pork fat, one of the ingredients of chistorra, was balanced without any of the ingredients dominating. Chemically, the chistorra was characterised by a fat content close to 67% (dry matter), low hydroxyproline occurrence (≤0.6), and protein amount ranging 18–38%.


1998 ◽  
Vol 38 (1) ◽  
pp. 159-166 ◽  
Author(s):  
J. C. Wang ◽  
J. K. Park

Bench-scale sequential batch reactors (SBRs) were fed with glucose- and acetate-containing synthetic wastewaters to evaluate microbial population dynamics and types of phosphorus-accumulating organisms (PAOs) using a cellular fatty acid profile analysis. The phosphorus content in the sludge was 38% (w/w) for the acetate-fed SBR and 20% (w/w) for the glucose-fed SBR with a VSS/TSS ratio of 50%. Glucose-fed PAOs were found to remove phosphorus with accumulation of glycogen in cells without synthesizing poly-β-hydroxybutyrate (PHB) at influent phosphorus concentration &lt; 20 mg-P/L and nitrate concentration &lt; 2 mg-N/L. From the fatty acid profile biomarker study, it was found that the glucose-fed SBR maintained the same fatty acid profile before and after biological phosphorus removal (BPR) occurred while the acetate-fed SBR had a different fatty acid profile. The microbial population in the glucose-fed SBR was significantly different in terms of metabolic behavior and cellular fatty acid profile from that introduced in the acetate-fed SBR. Fatty acid a15:0 (anteiso methyl-branching) was abundant in the glucose-fed PAOs. Among the five PAO candidates (Acinetobacter, Pseudomonas, Arthrobacter, Aeromonas, and Micrococcus), only Arthrobacter spp. had the biomarker of fatty acid a15:0, indicating that Arthrobacter spp. may be one of the PAOs existing in the glucose-fed bioreactors.


Sign in / Sign up

Export Citation Format

Share Document