Effect of the incorporation of hydroxyapatite on the diametral tensile strength of conventional and hybrid glass ionomer cements

Odontology ◽  
2021 ◽  
Author(s):  
Matias Mederos ◽  
Carlos Enrique Cuevas-Suarez ◽  
Walter Sanchez ◽  
Pablo Miranda ◽  
Alejandro Francia ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Glass Ionomer Cements ◽  
Glass Ionomer ◽  
Diametral Tensile Strength

scholarly journals Assessment of the mechanical properties of glass ionomer cements for orthodontic cementation

2012 ◽  
Vol 17 (6) ◽  
pp. 154-159 ◽  
Author(s):  
Marcel M. Farret ◽  
Eduardo Martinelli de Lima ◽  
Eduardo Gonçalves Mota ◽  
Hugo Mitsuo S. Oshima ◽  
Gabriela Maguilnik ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Bond Strength ◽  
Shear Bond Strength ◽  
Glass Ionomer Cements ◽  
Glass Ionomer ◽  
Resin Modified Glass Ionomer ◽  
Strength Tests ◽  
Diametral Tensile Strength

OBJECTIVE: To evaluate the mechanical properties of three glass ionomers cements (GICs) used for band cementation in Orthodontics. METHODS: Two conventional glass ionomers (Ketac Cem Easy mix/3M-ESPE and Meron/Voco) and one resin modified glass ionomer (Multi-cure Glass ionomer/3M-Unitek) were selected. For the compressive strength and diametral tensile strength tests, 12 specimens were made of each material. For the microhardness test 15 specimens were made of each material and for the shear bond strength tests 45 bovine permanent incisors were used mounted in a self-cure acrylic resin. Then, band segments with a welded bracket were cemented on the buccal surface of the crowns. For the mechanical tests of compressive and diametral tensile strength and shear bond strength a universal testing machine was used with a crosshead speed of 1,0 mm/min and for the Vickers microhardness analysis tests a Microdurometer was used with 200 g of load during 15 seconds. The results were submitted to statistical analysis through ANOVA complemented by Tukey's test at a significance level of 5%. RESULTS: The results shown that the Multi-Cure Glass Ionomer presented higher diametral tensile strength (p < 0.01) and compressive strength greater than conventional GICs (p = 0.08). Moreover, Ketac Cem showed significant less microhardness (p < 0.01). CONCLUSION: The resin-modified glass ionomer cement showed high mechanical properties, compared to the conventional glass ionomer cements, which had few differences between them.

scholarly journals Influence of powder/liquid ratio on the radiodensity and diametral tensile strength of glass ionomer cements

2010 ◽  
Vol 18 (6) ◽  
pp. 577-584 ◽  
Author(s):  
Rodrigo Borges Fonseca ◽  
Carolina Assaf Branco ◽  
Paulo Sérgio Quagliatto ◽  
Luciano de Souza Gonçalves ◽  
Carlos José Soares ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Glass Ionomer Cements ◽  
Glass Ionomer ◽  
Liquid Ratio ◽  
Diametral Tensile Strength

scholarly journals Mechanical Properties of Glass Ionomer Cements after Incorporation of Marine Derived Hydroxyapatite

Materials ◽  
2020 ◽  
Vol 13 (16) ◽  
pp. 3542
Author(s):  
Maja Bilić-Prcić ◽  
Valentina Brzović Rajić ◽  
Ana Ivanišević ◽  
Ana Pilipović ◽  
Sevil Gurgan ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Compressive Strength ◽  
Testing Machine ◽  
Descriptive Statistics ◽  
Glass Ionomer Cements ◽  
Glass Ionomer ◽  
Universal Testing ◽  
Diametral Tensile Strength ◽  
One Way Anova

The purpose of this study was to evaluate the effects of the incorporation of hydroxyapatite (HA) derived from cuttlefish bone on the mechanical properties of glass ionomer cements (GIC). Fuji II LC and Fuji IX GP Extra (GC Corporation, Tokyo, Japan) were used in the study. There were four groups (n = 11–18) for each material: a group without the addition of HA particles and three groups modified by incorporation of 2, 5, and 10 wt% HA. The tests were performed on a universal testing machine (Shimadzu, Duisburg, Germany) and descriptive statistics, two-way analysis of variance (ANOVA) for the comparison of three mechanical properties, and one-way ANOVA for the comparison of different concentrations for each material were performed. Regarding the Fuji IX groups, compressive strength (CS) and flexural strength (FS) were highest in the group without HA particles added. The differences in CS between the Fuji IX group without HA particles and the Fuji IX groups with 2 wt% HA and 10 wt% HA were significant. The Fuji II 5 wt% HA group exhibited higher diametral tensile strength (DTS) and CS than other Fuji II groups, but not significantly. The Fuji II group, modified with 10 wt% HA, exhibited significantly higher FS than the Fuji II group without HA particles (p < 0.05). Porous HA incorporated into the Fuji IX groups had a significant impact on mechanical properties only in the Fuji IX 5 wt% HA group. Fuji II groups modified with 10 wt% HA showed the most favorable results with respect to FS.

scholarly journals The Investigation of Bioactivity and Mechanical Properties of Glass Ionomer Cements Prepared from Al2O3-SiO2Glass and Poly(γ-glutamic acid)

2013 ◽  
Vol 2013 ◽  
pp. 1-6 ◽  
Author(s):  
Jinkun Liu ◽  
Yoshimitsu Kuwahara ◽  
Yuki Shirosaki ◽  
Toshiki Miyazaki
Keyword(s):  
Tensile Strength ◽  
Glutamic Acid ◽  
Glass Ionomer Cement ◽  
The Body ◽  
Apatite Formation ◽  
Glass Ionomer Cements ◽  
Glass Ionomer ◽  
Sem Images ◽  
Widespread Application ◽  
Diametral Tensile Strength

The glass ionomer cement as one of the dental cements has been subjected to be widespread application in restoring tooth structure. Most of glass ionomer cements employ the poly(acrylic acid) (PAA) as the liquid phase, but the presence of PAA inhibits the apatite formation on the surface in the body environment, which is an essential requirement for exhibiting bone-bonding ability (bioactivity). In this study, poly(γ-glutamic acid) (γ-PGA), a kind of biopolymer, was utilized for cement preparation. The effort of preparation parameters including the glass powders/liquid ratio (P/L) and the concentration ofγ-PGA on diametral tensile strength were investigated. A maximum diametral tensile strength value of11.88±1.43MPa was obtained when the cement sample was prepared by P/L ratio of 1 : 1 and theγ-PGA concentration of 30% after aging for 3 days. The TF-XRD patterns, SEM images, and EDX spectra suggested that the cement induced a precipitation of calcite on the surface after 7 days of immersion in stimulated body fluid (SBF), although the apatite formation was not observed. The present results suggest that the cement has potential to show bioactivityin vivo, because calcite is also reported to be bioactive.

scholarly journals Compressive and diametral tensile strength of glass ionomer cements

2004 ◽  
Vol 12 (4) ◽  
pp. 344-348 ◽  
Author(s):  
Eduardo Bresciani ◽  
Terezinha de Jesus Esteves Barata ◽  
Ticiane Cestari Fagundes ◽  
Akimi Adachi ◽  
Marina Martins Terrin ◽  
...  
Keyword(s):  
Tensile Strength ◽  
Testing Machine ◽  
Glass Ionomer Cement ◽  
Mean Value ◽  
Atraumatic Restorative Treatment ◽  
Glass Ionomer ◽  
Restorative Treatment ◽  
Significant Difference ◽  
The Mean ◽  
Diametral Tensile Strength

The aim of this study was to compare, in different periods of time, the compressive and diametral tensile strength of a traditional high viscous glass ionomer cement: Fuji IX (GC Corporation), with two new Brazilian GIC's: Vitro-Molar (DFL) and Bioglass R (Biodinamica), all indicated for the Atraumatic Restorative Treatment (ART) technique. Fifteen disk specimens (6.0mm diameter x 3.0mm height) for the diametral tensile strength (DTS) test and fifteen cylindrical specimens (6.0mm diameter x 12.0mm height) for the compressive strength (CS) test were made of each GIC. Specimens were stored in deionized water at 37º C and 100% of humidity in a stove until testing. Five specimens of each GIC were submitted to CS and DTS test in each period, namely 1 hour, 24 hours and 7 days. The specimens were tested in a testing machine (Emic) at a crosshead speed of 1.0mm/min for CS and 0.5mm/min for the DTS test until failure occurred. The data were submitted to two-way ANOVA and Tukey tests (alpha=0.05). The mean CS values ranged from 42.03 to 155.47MPa and means DTS from 5.54 to 13.72 MPa, with test periods from 1h to 7 days. The CS and DTS tests showed no statistically significant difference between Fuji IX and Vitro Molar, except for CS test at 1-hour period. Bioglass R had lowest mean value for CS of the cements tested. In DTS test Bioglass R presented no statistically significant differences when compared with all others tested GICs at 1-hour period and Bioglass R presented no difference at 24-hour and 7-day periods when compared to Vitro-Molar. Further studies to investigate other physical properties such as fracture toughness and wear resistance, as well as chemical composition and biocompatibility, are now needed to better understand the properties of these new Brazilian GIC's.

Sign in / Sign up

Export Citation Format

Share Document