scholarly journals A Dual-Grid Hybrid RANS/LES Model for Under-Resolved Near-Wall Regions and its Application to Heated and Separating Flows

2019 ◽  
Vol 104 (4) ◽  
pp. 835-859
Author(s):  
Philipp T. L. Nguyen ◽  
Juan C. Uribe ◽  
Imran Afgan ◽  
Dominique R. Laurence
Keyword(s):  
Grid Point ◽  
Plane Channel ◽  
Boundary Layer Separation ◽  
Navier Stokes ◽  
Overlapping Grids ◽  
Eddy Viscosity Model ◽  
Logarithmic Layer ◽  
High Reynolds ◽  
Les Model ◽  
Near Wall

Abstract A hybrid RANS/LES model for high Reynolds number wall-bounded flows is presented, in which individual Reynolds-Averaged Navier-Stokes (RANS) and Large Eddy Simulations (LES) are computed in parallel on two fully overlapping grids. The instantaneous, fluctuating subgrid-scale stresses are blended with a statistical eddy viscosity model in regions where the LES grid is too coarse. In the present case, the hybrid model acts as a near-wall correction to the LES, while it retains the fluctuating nature of the flow field. The dual computation enables the LES to be run on isotropic grids with very low wall-normal and wall-parallel resolution, while the auxiliary RANS simulation is conducted on a wall-refined high-aspect ratio grid. Running distinct, progressively corrected simulations allows a clearer separation of the mean and instantaneous flow fields, compliant with the fundamentally dissimilar nature of RANS and LES. Even with the wall-nearest grid point lying far in the logarithmic layer, velocity and temperature predictions of a heated plane channel flow are corrected. For a periodic hill flow, the dual-grid system improves the boundary layer separation and velocity field prediction both for a constant-spaced and a wall-refined LES grid.

Simulating flow separation from continuous surfaces: routes to overcoming the Reynolds number barrier

2009 ◽  
Vol 367 (1899) ◽  
pp. 2885-2903 ◽  
Author(s):  
Michael Leschziner ◽  
Ning Li ◽  
Fabrizio Tessicini
Keyword(s):  
Reynolds Number ◽  
Turbulent Flows ◽  
Major Elements ◽  
Wall Layer ◽  
Navier Stokes ◽  
Eddy Simulation ◽  
Large Eddy ◽  
Rans Models ◽  
High Reynolds ◽  
Near Wall

This paper provides a discussion of several aspects of the construction of approaches that combine statistical (Reynolds-averaged Navier–Stokes, RANS) models with large eddy simulation (LES), with the objective of making LES an economically viable method for predicting complex, high Reynolds number turbulent flows. The first part provides a review of alternative approaches, highlighting their rationale and major elements. Next, two particular methods are introduced in greater detail: one based on coupling near-wall RANS models to the outer LES domain on a single contiguous mesh, and the other involving the application of the RANS and LES procedures on separate zones, the former confined to a thin near-wall layer. Examples for their performance are included for channel flow and, in the case of the zonal strategy, for three separated flows. Finally, a discussion of prospects is given, as viewed from the writer's perspective.

scholarly journals Turbulent flow on a planar moving belt and a rotating disk: modelling and comparisons

2007 ◽  
Vol 587 ◽  
pp. 255-270 ◽  
Author(s):  
JOHN M. McDARBY ◽  
FRANK T. SMITH
Keyword(s):  
Turbulent Flow ◽  
Stokes Equations ◽  
Rotating Disk ◽  
Reynolds Numbers ◽  
Navier Stokes ◽  
Two Dimensional ◽  
Navier Stokes Equations ◽  
Eddy Viscosity Model ◽  
High Reynolds ◽  
Carry Over

Modelling of the fully turbulent flow produced on a moving belt and of that induced ona rotating disk is described, for each of which a more analytical approach is adopted than previously seen. The analysis for the two-dimensional moving belt indicates novel structures and these are found to carry over directly to the rotating disk flow which, ignoring the transitional regime, is three-componential but two-dimensional due to axisymmetry. This is based on addressing the Reynolds-averaged Navier–Stokes equations together with an eddy viscosity model, with the flow structure being analysed for high Reynolds numbers. A classical (von Kármán) constant within the model plays an important and surprising role, indicating that each of the belt and the disk flows has quite a massive thickness. Comparisons made with previous work show varying degrees of agreement. The approach, including the new prediction of massive thicknesses independent of the Reynoldsnumber, is expected to extend to flows induced by rotary blades, by related rotary devices and by other configurations of industrial interest.

Hybrid LES Approach for Practical Turbomachinery Flows—Part I: Hierarchy and Example Simulations

2011 ◽  
Vol 134 (2) ◽  
Author(s):  
Paul Tucker ◽  
Simon Eastwood ◽  
Christian Klostermeier ◽  
Richard Jefferson-Loveday ◽  
James Tyacke ◽  
...  
Keyword(s):  
Convex Surface ◽  
Computational Cost ◽  
Companion Paper ◽  
Navier Stokes ◽  
Computationally Efficient ◽  
Turbulent Structures ◽  
Hybrid Strategy ◽  
Eddy Simulation ◽  
Related Approach ◽  
Les Model

Unlike Reynolds-averaged Navier–Stokes (RANS) models that need calibration for different flow classes, LES (where larger turbulent structures are resolved by the grid and smaller modeled in a fashion reminiscent of RANS) offers the opportunity to resolve geometry dependent turbulence as found in complex internal flows—albeit at substantially higher computational cost. Based on the results for a broad range of studies involving different numerical schemes, large eddy simulation (LES) models and grid topologies, an LES hierarchy and hybrid LES related approach is proposed. With the latter, away from walls, no LES model is used, giving what can be termed numerical LES (NLES). This is relatively computationally efficient and makes use of the dissipation present in practical industrial computational fluid dynamics (CFD) programs. Near walls, RANS modeling is used to cover over numerous small structures, the LES resolution of which is generally intractable with current computational power. The linking of the RANS and NLES zones through a Hamilton–Jacobi equation is advocated. The RANS-NLES hybridization makes further sense for compressible flow solvers, where, as the Mach number tends to zero at walls, excessive dissipation can occur. The hybrid strategy is used to predict flow over a rib roughened surface and a jet impinging on a convex surface. These cases are important for blade cooling and show encouraging results. Further results are presented in a companion paper.

Simulation of the Transitional Flow in a Low Pressure Gas Turbine Cascade With a High-Order Discontinuous Galerkin Method

2013 ◽  
Vol 135 (7) ◽  
Author(s):  
A. Ghidoni ◽  
A. Colombo ◽  
S. Rebay ◽  
F. Bassi
Keyword(s):  
Discontinuous Galerkin ◽  
Turbulence Model ◽  
Stokes Equations ◽  
Time Integration ◽  
High Order ◽  
Transitional Flow ◽  
Navier Stokes ◽  
Implicit Time ◽  
Turbine Cascade ◽  
High Reynolds

In the last decade, discontinuous Galerkin (DG) methods have been the subject of extensive research efforts because of their excellent performance in the high-order accurate discretization of advection-diffusion problems on general unstructured grids, and are nowadays finding use in several different applications. In this paper, the potential offered by a high-order accurate DG space discretization method with implicit time integration for the solution of the Reynolds-averaged Navier–Stokes equations coupled with the k-ω turbulence model is investigated in the numerical simulation of the turbulent flow through the well-known T106A turbine cascade. The numerical results demonstrate that, by exploiting high order accurate DG schemes, it is possible to compute accurate simulations of this flow on very coarse grids, with both the high-Reynolds and low-Reynolds number versions of the k-ω turbulence model.

Numerical Simulation of Flow around a Cylinder under Different Reynolds Number

2014 ◽  
Vol 543-547 ◽  
pp. 434-440
Author(s):  
Qiang Liu ◽  
Wei Xie ◽  
Wen Yang Duan ◽  
Chang Hong Hu
Keyword(s):  
Reynolds Number ◽  
High Reynolds Number ◽  
Three Dimensional ◽  
Three Dimensional Model ◽  
Initial Field ◽  
Fine Grid ◽  
Flow Around A Cylinder ◽  
Wall Functions ◽  
High Reynolds ◽  
Les Model

Based on fully structured grids parallel numerical simulations of flow around a cylinder under different Reynolds number are carried out. Two-dimensional and three-dimensional models are established at the same time under specific Reynolds number, and further analyze of three-dimensional flow characteristics as well as the generated influence to overall physical quantities are presented. In order to explore efficient high Reynolds number turbulence models, a comparative research of the LES model without wall functions and the Spalart-Allmaras turbulence model is carried out. In order to improve the computational efficiency, a domain decomposition parallel computing strategy is used, and a calculation strategy that results of coarse grid was assigned to fine grid as initial field value by 3D linear interpolation is presented. Simulation results show that: Drag coefficient and Strouhal number have very good consistency with the experimental data, which verifies the correctness of the calculation method; Even if at low Reynolds number (200≤Re≤300), using a three-dimensional model is still necessary; While in the high Reynolds number stage, compared to LES model without wall functions, Spalart-Allmaras model is more applicable and more efficient.

Sign in / Sign up

Export Citation Format

Share Document