A stochastic forest fire growth model

2008 ◽  
Vol 16 (2) ◽  
pp. 133-151 ◽  
Author(s):  
Den Boychuk ◽  
W. John Braun ◽  
Reg J. Kulperger ◽  
Zinovi L. Krougly ◽  
David A. Stanford
Keyword(s):  
2007 ◽  
Vol 16 (2) ◽  
pp. 174 ◽  
Author(s):  
Kerry Anderson ◽  
Gerhard Reuter ◽  
Mike D. Flannigan

The focus of this investigation is to quantify the effects of perturbations in the meteorological data used in a fire-growth model. Observed variations of temperature, humidity, wind speed, and wind direction are applied as perturbations to hourly values within a simulated weather forecast to produce several forecasts. In turn, these are used by a deterministic eight-point fire-growth model to produce an ensemble of possible final fire perimeters. Two studies were conducted to assess the value of applying perturbations. In the first study, fire growth using detailed, one-minute data was compared to growth based on the more commonly used hourly data. Results showed that the detailed weather produced fire growth larger and wider than the hourly based data. By applying perturbations, variations in the flank and back-fire spread were captured by the random-perturbation model while the forward spread fell within the 20 to 30% probability prediction. A sensitivity analysis based on the observed variations showed that wind speed accounted for a 44% difference in area burned, while temperature accounted for only a 16% difference. In the second study, case studies were conducted on four observed forest fires in Wood Buffalo National Park. Results showed that daily fire-growth predictions using simulated weather forecasts over-predicted fire growth using actual hourly weather observations by 27%. Systematic-perturbation models best compensated for this with most fire growth falling within the predicted range of the models (52 out of 63 days).


2019 ◽  
Vol 19 (3) ◽  
pp. 121-130
Author(s):  
Sunjoo Lee ◽  
Sungyong Kim ◽  
Byungdoo Lee ◽  
Young Jin Lee

1984 ◽  
Vol 14 (4) ◽  
pp. 589-594
Author(s):  
Yash P. Aneja ◽  
Mahmut Parlar

This paper deals with finding the optimal size of a forest fire fighting organization. Fire occurrence and fire growth rate are assumed to be random variables with given probability densities. An objective function representing the expected cost is developed by using probabilistic arguments. The resulting nonlinear programming problem with nonnegativity constraints is solved and an extensive sensitivity analysis is presented for cost related and noncost parameters of the problem.


1989 ◽  
Vol 19 (11) ◽  
pp. 1496-1500
Author(s):  
R. S. McAlpine

Elliptical fire growth models are dependant on a relationship between the length to width ratio of the ellipse and the prevailing wind speed. A laboratory study of point source fires growing in two fuel types (Ponderosa Pine (Pinusponderosa Laws.) needle litter and excelsior) showed that the length to width ratio changes from the time of inception until a stabilized "equilibrium" eccentricity is established. The size of fuel bed required to allow stabilization of the length to width ratio is dependant on wind speed. Results indicate that a fuel bed 0.93 m wide is insufficient to allow length to width ratio stabilization for wind speeds above 1.6 km/h.


2012 ◽  
Vol 50 (2) ◽  
pp. 437-454
Author(s):  
Arun Veeramany ◽  
Elizabeth J. Weckman ◽  
Mahesh D. Pandey
Keyword(s):  

1999 ◽  
Vol 9 (2) ◽  
pp. 129 ◽  
Author(s):  
Gary L. Hufford ◽  
Herbert L. Kelley ◽  
Raymond K. Moore ◽  
Jeffrey S. Cotterman

The utility of the new GOES-9 satellite 3.9 µm channel to monitor wildfires and their subsequent changes in growth and intensity in Alaska is examined. The June, 1996 Miller’s Reach forest fire is presented as a case study. Eighteen hours of sequential imagery coincident to the initiation and early stages of the fire are analyzed for hot spots. The dramatic response of the 3.9 µm channel to sub-pixel hot spots and the ability to access the data every 15 minutes makes the channel an effective tool to support forest fire management on wildfires in high latitudes to at least 61°N. In the case of Miller’s Reach, the fire was detected when it was less than 200 hectares in size. Changes in fire growth and intensity were also observed. An automated technique for decision makers which classifies hot spots without requiring image interpretation is proposed.


2011 ◽  
Vol 20 (4) ◽  
pp. 497 ◽  
Author(s):  
Justin Podur ◽  
B. Mike Wotton

Forest fire managers have long understood that most of a fire’s growth typically occurs on a small number of days when burning conditions are conducive for spread. Fires either grow very slowly at low intensity or burn considerable area in a ‘run’. A simple classification of days into ‘spread events’ and ‘non-spread events’ can greatly improve estimates of area burned. Studies with fire-growth models suggest that the Canadian Forest Fire Behaviour Prediction System (FBP System) seems to predict growth well during high-intensity ‘spread events’ but tends to overpredict rate of spread for non-spread events. In this study, we provide an objective weather-based definition of ‘spread events’, making it possible to assess the probability of having a spread event on any particular day. We demonstrate the benefit of incorporating this ‘spread event’ day concept into a fire-growth model based on the Canadian FBP System.


Sign in / Sign up

Export Citation Format

Share Document