scholarly journals Broadband Rotary Joint Concept for High-Power Radar Applications

2021 ◽  
Author(s):  
Daniel Haas ◽  
Manfred Thumm ◽  
John Jelonnek
Keyword(s):  
Transmission Line ◽  
High Power ◽  
Polarization Plane ◽  
Cross Polarization ◽  
Frequency Range ◽  
Rotary Joint ◽  
W Band ◽  
Linearly Polarized ◽  
Radar Applications

AbstractTo allow antenna movements in azimuth and elevation in high-power radar applications, rotary joints are essential. They allow the rotation of a transmission line and therefore are important transmission line components. In the present paper, a broadband rotary joint concept for high-power W-band radar applications is proposed. To avoid a twist of the polarization plane of a linearly polarized mode, like HE11, a combination of two broadband polarizer is used. A cross polarization of Xpol ≤ − 20 dB can be achieved within the considered frequency range from 90 GHz to 100 GHz. This corresponds to a suitable value for radar applications.

scholarly journals Principle for the Realization of Dual-Orthogonal Linearly Polarized Antennas for UWB Technique

2011 ◽  
Vol 2011 ◽  
pp. 1-11 ◽  
Author(s):  
Grzegorz Adamiuk ◽  
Mario Pauli ◽  
Thomas Zwick
Keyword(s):  
Substrate Surface ◽  
Single Point ◽  
Broad Band ◽  
Main Beam ◽  
Cross Polarization ◽  
Frequency Range ◽  
Beam Direction ◽  
Array Configuration ◽  
Uwb Radar ◽  
Linearly Polarized

A concept of an array configuration for an ultrawideband suppression of the cross-polarization is presented. The method is explained in detail, and a mathematical description of the principle is given. It is shown that the presented configuration is convenient for the development of very broad band, dual-orthogonal, linearly polarized antennas with high polarization purity. The investigated configuration shows a high decoupling of the orthogonal ports and is capable for antennas with a main beam direction perpendicular to the substrate surface, that is, for a planar design. The phase center of the antenna configuration remains fixed at one single point over the complete desired frequency range, allowing a minimum dispersion of the radiated signal. The influence of nonidealities in the feeding network on the polarization purity is investigated. The presented method introduces a superior possibility of an extension of typical UWB technique to fully polarized systems, which improves significantly performance in, for example, UWB-MIMO or UWB-Radar.

60 GHz-Band Low-Noise Amplifier

2017 ◽  
Vol 26 (05) ◽  
pp. 1750075 ◽  
Author(s):  
Najam Muhammad Amin ◽  
Lianfeng Shen ◽  
Zhi-Gong Wang ◽  
Muhammad Ovais Akhter ◽  
Muhammad Tariq Afridi
Keyword(s):  
Transmission Line ◽  
Quality Factor ◽  
Noise Figure ◽  
Cmos Technology ◽  
Low Noise ◽  
Constant Current ◽  
60 Ghz ◽  
Frequency Range ◽  
Constant Current Density ◽  
Chip Area

This paper presents the design of a 60[Formula: see text]GHz-band LNA intended for the 63.72–65.88[Formula: see text]GHz frequency range (channel-4 of the 60[Formula: see text]GHz band). The LNA is designed in a 65-nm CMOS technology and the design methodology is based on a constant-current-density biasing scheme. Prior to designing the LNA, a detailed investigation into the transistor and passives performances at millimeter-wave (MMW) frequencies is carried out. It is shown that biasing the transistors for an optimum noise figure performance does not degrade their power gain significantly. Furthermore, three potential inductive transmission line candidates, based on coplanar waveguide (CPW) and microstrip line (MSL) structures, have been considered to realize the MMW interconnects. Electromagnetic (EM) simulations have been performed to design and compare the performances of these inductive lines. It is shown that the inductive quality factor of a CPW-based inductive transmission line ([Formula: see text] is more than 3.4 times higher than its MSL counterpart @ 65[Formula: see text]GHz. A CPW structure, with an optimized ground-equalizing metal strip density to achieve the highest inductive quality factor, is therefore a preferred choice for the design of MMW interconnects, compared to an MSL. The LNA achieves a measured forward gain of [Formula: see text][Formula: see text]dB with good input and output impedance matching of better than [Formula: see text][Formula: see text]dB in the desired frequency range. Covering a chip area of 1256[Formula: see text][Formula: see text]m[Formula: see text]m including the pads, the LNA dissipates a power of only 16.2[Formula: see text]mW.

High power broadband W-band gyrotron traveling wave amplifier

2003 ◽  
Author(s):  
D.B. McDermott ◽  
H.H. Song ◽  
L.R. Barnett ◽  
Y. Hirata ◽  
A.T. Lin ◽  
...  
Keyword(s):  
High Power ◽  
Traveling Wave ◽  
W Band ◽  
Traveling Wave Amplifier
Sign in / Sign up

Export Citation Format

Share Document