Mathematical Model of Heat Transfer in the Catalyst Granule with Point Reaction Centers

2018 ◽  
Vol 91 (1) ◽  
pp. 40-51 ◽  
Author(s):  
I. V. Derevich ◽  
A. Yu. Fokina
Keyword(s):  
Heat Transfer ◽  
Mathematical Model ◽  
Reaction Centers ◽  
Catalyst Granule

Design of the Blast Furnace Wall Structure Made of Efficient Materials. Part 4. Calculation Examples

2020 ◽  
Vol 786 (11) ◽  
pp. 30-34
Author(s):  
A.M. IBRAGIMOV ◽  
◽  
L.Yu. GNEDINA ◽  
Keyword(s):  
Heat Transfer ◽  
Mathematical Model ◽  
Blast Furnace ◽  
Boundary Value Problems ◽  
Transfer Process ◽  
Rational Design ◽  
Boundary Value ◽  
Heat Transfer Process ◽  
Furnace Wall ◽  
Time Interval

This work is part of a series of articles under the general title The structural design of the blast furnace wall from efficient materials [1–3]. In part 1, Problem statement and calculation prerequisites, typical multilayer enclosing structures of a blast furnace are considered. The layers that make up these structures are described. The main attention is paid to the lining layer. The process of iron smelting and temperature conditions in the characteristic layers of the internal environment of the furnace is briefly described. Based on the theory of A.V. Lykov, the initial equations describing the interrelated transfer of heat and mass in a solid are analyzed in relation to the task – an adequate description of the processes for the purpose of further rational design of the multilayer enclosing structure of the blast furnace. A priori the enclosing structure is considered from a mathematical point of view as the unlimited plate. In part 2, Solving boundary value problems of heat transfer, boundary value problems of heat transfer in individual layers of a structure with different boundary conditions are considered, their solutions, which are basic when developing a mathematical model of a non-stationary heat transfer process in a multi-layer enclosing structure, are given. Part 3 presents a mathematical model of the heat transfer process in the enclosing structure and an algorithm for its implementation. The proposed mathematical model makes it possible to solve a large number of problems. Part 4 presents a number of examples of calculating the heat transfer process in a multilayer blast furnace enclosing structure. The results obtained correlate with the results obtained by other authors, this makes it possible to conclude that the new mathematical model is suitable for solving the problem of rational design of the enclosing structure, as well as to simulate situations that occur at any time interval of operation of the blast furnace enclosure.

Systems Actuated by Shape Memory Alloys: Identification and Modeling

2021 ◽  
Vol 1 (2) ◽  
pp. 12-20
Author(s):  
Najmeh Keshtkar ◽  
Johannes Mersch ◽  
Konrad Katzer ◽  
Felix Lohse ◽  
Lars Natkowski ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Mathematical Model ◽  
Constitutive Model ◽  
Shape Memory Alloys ◽  
Numerical Simulations ◽  
Shape Memory ◽  
Transfer Equation ◽  
Mechanical Parameters ◽  
Heat Transfer Equation ◽  
The Mathematical Model

This paper presents the identification of thermal and mechanical parameters of shape memory alloys by using the heat transfer equation and a constitutive model. The identified parameters are then used to describe the mathematical model of a fiber-elastomer composite embedded with shape memory alloys. To verify the validity of the obtained equations, numerical simulations of the SMA temperature and composite bending are carried out and compared with the experimental results.

scholarly journals Heat transfer through textile fabrics: mathematical model

1989 ◽  
Vol 12 (9) ◽  
pp. 1187 ◽  
Author(s):  
M.I. Ismail ◽  
A.S.A. Ammar ◽  
M. El-Okeily
Keyword(s):  
Heat Transfer ◽  
Mathematical Model ◽  
Textile Fabrics

scholarly journals Development of condenser mathematical model for research and development of ways to improve its efficiency

2020 ◽  
Vol 18 (4) ◽  
pp. 578-585
Author(s):  
Madina Shavdinova ◽  
Konstantin Aronson ◽  
Nina Borissova
Keyword(s):  
Heat Transfer ◽  
Mathematical Model ◽  
Water Temperature ◽  
Steam Turbine ◽  
Cooling Water ◽  
Laboratory Research ◽  
Thermal Engineering ◽  
Linear Regression Method ◽  
Cooling Water Temperature ◽  
The Mathematical Model

The condensing unit is one of the most important elements of the steam turbine of a combined heat and power plant. Defects in elements of the condensing unit lead to disturbances in the steam turbine operation, its failures and breakdowns, as well as efficiency losses of the plant. Therefore, the operating personnel need to know the cause of the malfunction and to correct it immediately. There are no diagnostic models of condensers in the Republic of Kazakhstan at the moment. In this regard, a mathematical model of a condenser based on the methodology of Kaluga Turbine Plant (KTP) has been developed. The mathematical model makes it possible to change the input parameters, plot dependency diagrams, and calculate the plant efficiency indicators. The mathematical model of the condenser can be used to research ways for the improvement of the condensing unit efficiency, for diagnostic purposes of the equipment condition, for the energy audit conduction of the plant, and in the training when performing virtual laboratory research. Using static data processing by linear regression method we obtain that the KTP methodology of condenser calculation is fair at cooling water temperature from 20 °C to 24 °C, but at cooling water temperature from 20 °C to 28 °C, the methodology of JSC "All-Russia Thermal Engineering Institute" (JSC "VTI") is used. One of the ways to increase the condenser efficiency has been proposed. It is the heat transfer augmentation with riffling annular grooves on tubes. This method increases the heat transfer coefficient by 2%, reduces the water subcooling of the heating steam by 0.9 °C, and decreases the cooling area by 2%.

Sign in / Sign up

Export Citation Format

Share Document