scholarly journals New insights on homogenization for hexagonal-shaped composites as Cosserat continua

Meccanica ◽  
2021 ◽  
Author(s):  
Marco Colatosti ◽  
Nicholas Fantuzzi ◽  
Patrizia Trovalusci ◽  
Renato Masiani
Keyword(s):  
Continuum Theory ◽  
Representative Elementary Volume ◽  
Elementary Volume ◽  
Displacement Fields ◽  
Micropolar Continuum ◽  
Rigid Particles ◽  
Hexagonal Shape ◽  
Classical Models ◽  
Elastic Interfaces ◽  
Cosserat Continua

AbstractIn this work, particle composite materials with different kind of microstructures are analyzed. Such materials are described as made of rigid particles and elastic interfaces. Rigid particles of arbitrary hexagonal shape are considered and their geometry is described by a limited set of parameters. Three different textures are analyzed and static analyses are performed for a comparison among the solutions of discrete, micropolar (Cosserat) and classical models. In particular, the displacements of the discrete model are compared to the displacement fields of equivalent micropolar and classical continua realized through a homogenization technique, starting from the representative elementary volume detected with a numeric approach. The performed analyses show the effectiveness of adopting the micropolar continuum theory for describing such materials.

scholarly journals Material Symmetries in Homogenized Hexagonal-Shaped Composites as Cosserat Continua

Symmetry ◽  
2020 ◽  
Vol 12 (3) ◽  
pp. 441 ◽  
Author(s):  
Nicholas Fantuzzi ◽  
Patrizia Trovalusci ◽  
Raimondo Luciano
Keyword(s):  
Degrees Of Freedom ◽  
Constitutive Law ◽  
Cosserat Theory ◽  
Rigid Particles ◽  
Hexagonal Shape ◽  
Elastic Interfaces ◽  
The Difference ◽  
Constitutive Parameters ◽  
Cosserat Continua ◽  
The Continuum

In this work, material symmetries in homogenized composites are analyzed. Composite materials are described as materials made of rigid particles and elastic interfaces. Rigid particles of arbitrary hexagonal shape are considered and their geometry described by a limited set of parameters. The purpose of this study is to analyze different geometrical configurations of the assemblies corresponding to various material symmetries such as orthotetragonal, auxetic and chiral. The problem is investigated through a homogenization technique which is able to carry out constitutive parameters using a principle of energetic equivalence. The constitutive law of the homogenized continuum has been derived within the framework of Cosserat elasticity, wherein the continuum has additional degrees of freedom with respect to classical elasticity. A panel composed of material with various symmetries, corresponding to some particular hexagonal geometries defined, is analyzed under the effect of localized loads. The results obtained show the difference of the micropolar response for the considered material symmetries, which depends on the non-symmetries of the strain and stress tensor as well as on the additional kinematical and work-conjugated statical descriptors. This work underlines the importance of resorting to the Cosserat theory when analyzing anisotropic materials.

scholarly journals Estimating the Effect of Fractal Dimension on Representative Elementary Volume of Randomly Distributed Rock Fracture Networks

Geofluids ◽  
2018 ◽  
Vol 2018 ◽  
pp. 1-13 ◽  
Author(s):  
Jing Zhang ◽  
Liyuan Yu ◽  
Hongwen Jing ◽  
Richeng Liu
Keyword(s):  
Fractal Dimension ◽  
Functional Relationship ◽  
Rock Fracture ◽  
Representative Elementary Volume ◽  
Width Ratio ◽  
Elementary Volume ◽  
Equivalent Permeability ◽  
Length Width ◽  
Rock Fracture Networks

The effect of fractal dimension (Df) on the determination of representative elementary volume (REV) was investigated through numerical experimentations, in which a new method was adopted to extract submodels that have different length-width ratios from original discrete facture networks (DFNs). Fluid flow in 1610 DFNs with different geometric characteristics of fractures and length-width ratios was simulated, and the equivalent permeability was calculated. The results show that the average equivalent permeability (KREV) at the REV size for DFNs increases with the increase in Df. The KREV shows a downward trend with increasing length-width ratio of the submodel. A strong exponent functional relationship is found between the REV size and Df. The REV size decreases with increasing Df. With the increment of the length-width ratio of submodels, the REV size shows a decreasing trend. The effects of length-width ratio and Df on the REV size can be negligible when Df≥1.5, but are significant when Df<1.5.

scholarly journals Determination of representative elementary volume (REV) for jointed rock masses exhibiting scale-dependent behavior: A numerical investigation

2021 ◽  
Author(s):  
Mehmet Sari
Keyword(s):  
Jointed Rock ◽  
Representative Elementary Volume ◽  
Elementary Volume ◽  
Rock Masses ◽  
Continuum Approach ◽  
Joint Spacing ◽  
Jointed Rock Masses ◽  
Equivalent Continuum ◽  
Equivalent Continuum Approach

Abstract Representative elementary volume (REV) is defined as the usual size of a rock mass structure beyond which its mechanical properties are homogenous and isotropic, and its behavior can be modeled using the equivalent continuum approach. Determination of REV is a complex problem in rock engineering due to its definition ambiguity and application area. This study is one of the first attempts to define a REV for jointed rock masses using the equivalent continuum approach. It is aimed to numerically search a ratio between the characteristic size of an engineering structure and pre-existing joint spacing, which are the two most important contributing elements in assessing REV. For this purpose, four hypothetical engineering cases were investigated using the RS2 (Phase2 v. 9.0) finite element (FE) analysis program. An underground circular opening with a constant diameter, an open-pit mine with varying bench heights, a single bench with a constant height, and an underground powerhouse cavern with a known dimension were executed for possible changes in the safety factor and total displacement measurements under several joint spacing values. Different cut-off REVs were calculated for FE models depending on the type of excavation and measurement method. An average REV size of 19.0, ranging between a minimum of 2 for tunnels and a maximum of 48 for slopes, was found in numerical analysis. The calculated sizes of REV were significantly larger than the range of values (5 to 10) commonly reported in the relevant geotechnical literature.

scholarly journals Upscaling of elastic properties in carbonates: A modeling approach based on a multiscale geophysical data set

2020 ◽  
Author(s):  
Jerome Fortin ◽  
Cedric Bailly ◽  
Mathilde Adelinet ◽  
Youri Hamon
Keyword(s):  
Elastic Properties ◽  
Wave Velocity ◽  
Representative Elementary Volume ◽  
P Wave ◽  
Elementary Volume ◽  
Data Set ◽  
Wave Velocities ◽  
P Wave Velocity ◽  
Ultrasonic Measurements ◽  
Seismic Scale

&lt;p&gt;Linking ultrasonic measurements made on samples, with sonic logs and seismic subsurface data, is a key challenge for the understanding of carbonate reservoirs. To deal with this problem, we investigate the elastic properties of dry lacustrine carbonates. At one study site, we perform a seismic refraction survey (100 Hz), as well as sonic (54 kHz) and ultrasonic (250 kHz) measurements directly on outcrop and ultrasonic measurements on samples (500 kHz). By comparing the median of each data set, we show that the P wave velocity decreases from laboratory to seismic scale. Nevertheless, the median of the sonic measurements acquired on outcrop surfaces seems to fit with the seismic data, meaning that sonic acquisition may be representative of seismic scale. To explain the variations due to upscaling, we relate the concept of representative elementary volume with the wavelength of each scale of study. Indeed, with upscaling, the wavelength varies from millimetric to pluri-metric. This change of scale allows us to conclude that the behavior of P wave velocity is due to different geological features (matrix porosity, cracks, and fractures) related to the different wavelengths used. Based on effective medium theory, we quantify the pore aspect ratio at sample scale and the crack/fracture density at outcrop and seismic scales using a multiscale representative elementary volume concept. Results show that the matrix porosity that controls the ultrasonic P wave velocities is progressively lost with upscaling, implying that crack and fracture porosity impacts sonic and seismic P wave velocities, a result of paramount importance for seismic interpretation based on deterministic approaches.&lt;/p&gt;&lt;p&gt;Bailly, C., Fortin, J., Adelinet, M., &amp; Hamon, Y. (2019). Upscaling of elastic properties in carbonates: A modeling approach based on a multiscale geophysical data set. Journal of Geophysical Research: Solid Earth, 124. https://doi.org/10.1029/2019JB018391&lt;/p&gt;

Analysis of Complex Structures Coupling Variable Kinematics One-Dimensional Models

2014 ◽  
Author(s):  
Erasmo Carrera ◽  
Enrico Zappino
Keyword(s):  
Mechanical Design ◽  
Computational Cost ◽  
Advanced Materials ◽  
Complex Structures ◽  
Displacement Fields ◽  
One Dimensional ◽  
Classical Models ◽  
Kinematic Models ◽  
Carrera Unified Formulation ◽  
Dimensional Models

One-dimensional models are widely used in mechanical design. Classical models, Euler-Bernoulli or Timoshenko, ensure a low computational cost but are limited by their assumptions, many refined models were proposed to overcome these limitations and extend one-dimensional models at the analysis of complex geometries or advanced materials. In this work a new approach is proposed to couple different kinematic models. A new finite element is introduced in order to connect one-dimensional elements with different displacement fields. The model is derived in the frameworks of the Carrera Unified Formulation (CUF), therefore the formulation can be written in terms of fundamental nuclei. The results show that the use variable kinematic models allows the computational costs to be reduced without reduce the accuracy, moreover, refined-one dimensional models can be used in the analysis of complex structures.

Sign in / Sign up

Export Citation Format

Share Document