Effects of Different Modes of Hot Cross-Rolling in 7010 Aluminum Alloy: Part II. Mechanical Properties Anisotropy

2013 ◽  
Vol 44 (6) ◽  
pp. 2764-2777 ◽  
Author(s):  
Chandan Mondal ◽  
A. K. Singh ◽  
A. K. Mukhopadhyay ◽  
K. Chattopadhyay
Keyword(s):  
Mechanical Properties ◽  
Aluminum Alloy ◽  
Cross Rolling ◽  
Alloy Part

Microstructure and Mechanical Properties of a 6061 Aluminum Alloy Part Prepared by Casting-Forging Integrated Forming Technology

2014 ◽  
Vol 788 ◽  
pp. 215-222
Author(s):  
Yong Peng ◽  
Shun Cheng Wang ◽  
Hai Tao Zhou ◽  
Kai Hong Zheng ◽  
He Xing Chen
Keyword(s):  
Mechanical Properties ◽  
Tensile Strength ◽  
Aluminum Alloy ◽  
Ultimate Tensile Strength ◽  
Casting Condition ◽  
6061 Aluminum Alloy ◽  
Forming Technology ◽  
Microstructure And Mechanical Properties ◽  
Heat Treated ◽  
Alloy Part

The effect of applied forging pressure on microstructure and mechanical properties of 6061 aluminum alloy was examined. The results showed that the ultimate tensile strength, elongation and hardness of the alloy after heat-treated treatment increase with the applied forging pressure, and the corresponding highest values, 365MPa, 11.52% and 146.53HV, were obtained at the applied forging pressure of 120MPa. Compared to casting condition without forging pressure, the ultimate tensile strength, elongation and hardness can be increased by 22.8%, 98.2% and 48.7%, respectively. The defects such as the shrinkage pores and cracks were absent in the microstructure due to the applied forging pressure. The SEM observation indicated that the fracture mode of 6061 aluminum alloy is more ductile at higher applied forging pressure.

KAISER ALUMINUM ALLOY 7049

Alloy Digest ◽  
1999 ◽  
Vol 48 (12) ◽  
Keyword(s):  
Mechanical Properties ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Stress Corrosion Cracking ◽  
Heat Treating ◽  
Kaiser Aluminum ◽  
Resistance To Stress ◽  
Structural Parts

Abstract Kaiser Aluminum Alloy 7049 has high mechanical properties and good machinability. The alloy offers a resistance to stress-corrosion cracking and is typically used in aircraft structural parts. This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength as well as fatigue. It also includes information on forming, heat treating, machining, and surface treatment. Filing Code: AL-365. Producer or source: Tennalum, A Division of Kaiser Aluminum.

KAISER ALUMINUM ALLOY KA62

Alloy Digest ◽  
1999 ◽  
Vol 48 (10) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
Physical Properties ◽  
Surface Treatment ◽  
Physical And Mechanical Properties ◽  
Heat Treating ◽  
Lead Free ◽  
Kaiser Aluminum

Abstract Kaiser Aluminum alloy KA62 (Tennalum alloy KA62) is a lead-free alternative to 6262. It offers good machinability and corrosion resistance and displays good acceptance of coatings (anodize response). It can be used in place of 6262 because its physical and mechanical properties are equivalent to those of 6262 (see Alloy Digest Al-361, September 1999). This datasheet provides information on composition, physical properties, hardness, tensile properties, and shear strength. It also includes information on corrosion resistance as well as forming, heat treating, machining, and surface treatment. Filing Code: AL-362. Producer or source: Tennalum, A Division of Kaiser Aluminum.

UNS A97075

Alloy Digest ◽  
1986 ◽  
Vol 35 (7) ◽  
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Aluminum Alloy ◽  
High Strength ◽  
Heat Treating ◽  
Good Resistance ◽  
Temperature Performance ◽  
Structural Applications ◽  
Structural Parts ◽  
Very High

Abstract UNS No. A97075 is a wrought precipitation-hardenable aluminum alloy. It has excellent mechanical properties, workability and response to heat treatment and refrigeration. Its typical uses comprise aircraft structural parts and other highly stressed structural applications where very high strength and good resistance to corrosion are required. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low temperature performance as well as forming, heat treating, and machining. Filing Code: Al-269. Producer or source: Various aluminum companies.

UNS A96061

Alloy Digest ◽  
1988 ◽  
Vol 37 (11) ◽  
Keyword(s):  
Mechanical Properties ◽  
Corrosion Resistance ◽  
Shear Strength ◽  
Aluminum Alloy ◽  
High Temperature ◽  
Physical Properties ◽  
Tensile Properties ◽  
Heat Treating ◽  
Temperature Performance

Abstract UNS A96061 is a wrought precipitation-hardenable aluminum alloy having excellent resistance to corrosion and good mechanical properties. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength as well as fatigue. It also includes information on low and high temperature performance, and corrosion resistance as well as forming, heat treating, machining, and joining. Filing Code: Al-292. Producer or source: Various aluminum companies.

850.0 and 852.0 ALUMINUM ALLOY BEARING BARS

Alloy Digest ◽  
1988 ◽  
Vol 37 (9) ◽  
Keyword(s):  
Mechanical Properties ◽  
Thermal Conductivity ◽  
Corrosion Resistance ◽  
Aluminum Alloy ◽  
Heat Treating ◽  
Light Metal ◽  
General Purpose ◽  
High Ductility ◽  
Higher Temperature ◽  
Bearing Alloy

Abstract 850.0 ALUMINUM Alloy can be considered the general purpose light metal bearing alloy. Its good thermal conductivity keeps operating temperatures low. It has high ductility. In many applications it has been found to be superior to steel backed bearings. 852.0 ALUMINUM Alloy has higher mechanical properties making it suitable for heavier load and higher temperature applications. This datasheet provides information on composition, physical properties, hardness, elasticity, tensile properties, and shear strength. It also includes information on corrosion resistance as well as heat treating and machining. Filing Code: Al-290. Producer or source: Federated Bronze Products Inc..

Sign in / Sign up

Export Citation Format

Share Document