Facile Preparation of a Wet-Laid Based Graphite Nanoplate and Polyethylene Terephthalate Staple Fiber Composite for Textile-Structured Rollable Electronics

Author(s):  
Kyung Chul Sun ◽  
Mumtaz Ali ◽  
Aima Sameen Anjum ◽  
Jung Woo Noh ◽  
Iftikhar Ali Sahito ◽  
...  
2020 ◽  
Vol 107 ◽  
pp. 172-181 ◽  
Author(s):  
Xing Zhou ◽  
Jingrui Deng ◽  
Rong Yang ◽  
Dan Zhou ◽  
Changqing Fang ◽  
...  

2019 ◽  
Vol 31 (6) ◽  
pp. 790-801
Author(s):  
Juan Song ◽  
Xuzhong Su ◽  
Xinjin Liu

Purpose With the improvement of living standards and acceleration of working pace, the shape retention property of textiles has attracted more attention. Yarn spinning is the first fundamental process in making textiles and apparel, and the properties of yarn influence the performance of textiles directly. Filament/staple fiber composite yarn is a kind of yarn spun by filament and staple fiber, and comprehensive qualities of yarn can be improved. Therefore, the purpose of this paper is to study the shape retention properties of filament/staple fiber composite yarns and corresponding fabrics. Design/methodology/approach Four kinds of composite yarn, core-spun yarn with one 50D SPH filament feeding, sirofil wrapped yarn with one 50D SPH filament feeding from left, sirofil wrapped yarn with one 50D SPH filament feeding from right, sirofil wrapped yarn with two 25D SPH filaments feeding from two sides, were spun. The qualities of spun yarns were measured. Then, corresponding two kinds of twill fabrics were woven by core-spun yarn and sirofil wrapped yarn with two filaments, respectively. The handle parameters, crease recovery, appearance leveling after washing, dimensional change rate after washing, strength and elongation and tensile elasticity were tested by using corresponding test instruments. Findings The tested results of spun yarn qualities show that comparing with the core-spun yarn, the evenness of sirofil wrapped yarn is improved, the hairiness is reduced, and the breaking strength and elongation are increased. Comparing with sirofil wrapped yarn with one filament, the evenness of sirofil wrapped yarn with two filaments is improved. The measured results of fabrics properties show that under the same weaving process, comparing to the fabric woven by core-spun yarn, the dimension of fabric woven by sirofil wrapped yarn is small after desizing, and warp and weft density is large. The possible reason is that the shrinkage of the SPH filament outside the sirofil wrapped yarn happens after desizing, which also makes the dimensional change rate after washing of the corresponding fabric large, and crease recovery poor. Originality/value In the paper, for improving the shape retention properties of the pure cotton woven fabric, one kind of SPH filament was added to the woven fabric by spinning filament/staple fiber composite yarns. Four kinds of composite yarn, core-spun yarn with one 50D SPH filament, sirofil wrapped yarn with one 50D SPH filament feeding from the left side, sirofil wrapped yarn with one 50D SPH filament feeding from the right side, sirofil wrapped yarn with two 25D SPH filaments feeding from two sides, were spun. Two kinds of twill fabrics were weaving by core-spun yarn and sirofil wrapped yarn with two filaments, respectively.


2001 ◽  
Vol 11 (PR3) ◽  
pp. Pr3-357-Pr3-362 ◽  
Author(s):  
D. D. Papakonstantinou ◽  
D. Mataras ◽  
Arefi-Khonsari

TAPPI Journal ◽  
2015 ◽  
Vol 14 (3) ◽  
pp. 167-174 ◽  
Author(s):  
QIANQIAN WANG ◽  
J.Y. ZHU

Mixed office paper (MOP) pulp without deinking with an ash content of 18.1 ± 1.5% was used as raw material to produce nanofiller-paper. The MOP pulp with filler was mechanically fibrillated using a laboratory stone grinder. Scanning electron microscope imaging revealed that the ground filler particles were wrapped by cellulose nanofibrils (CNFs), which substantially improved the incorporation of filler into the CNF matrix. Sheets made of this CNF matrix were densified due to improved bonding. Specific tensile strength and modulus of the nanofiller-paper with 60-min grinding reached 48.4 kN·m/kg and 8.1 MN·m/kg, respectively, approximately 250% and 200% of the respective values of the paper made of unground MOP pulp. Mechanical grinding duration did not affect the thermal stability of the nanofiller-paper.


1938 ◽  
Vol 7 (2) ◽  
pp. 23-24
Author(s):  
M. S. F.
Keyword(s):  

2003 ◽  
Vol 774 ◽  
Author(s):  
Janice L. McKenzie ◽  
Michael C. Waid ◽  
Riyi Shi ◽  
Thomas J. Webster

AbstractSince the cytocompatibility of carbon nanofibers with respect to neural applications remains largely uninvestigated, the objective of the present in vitro study was to determine cytocompatibility properties of formulations containing carbon nanofibers. Carbon fiber substrates were prepared from four different types of carbon fibers, two with nanoscale diameters (nanophase, or less than or equal to 100 nm) and two with conventional diameters (or greater than 200 nm). Within these two categories, both a high and a low surface energy fiber were investigated and tested. Astrocytes (glial scar tissue-forming cells) and pheochromocytoma cells (PC-12; neuronal-like cells) were seeded separately onto the substrates. Results provided the first evidence that astrocytes preferentially adhered on the carbon fiber that had the largest diameter and the lowest surface energy. PC-12 cells exhibited the most neurites on the carbon fiber with nanodimensions and low surface energy. These results may indicate that PC-12 cells prefer nanoscale carbon fibers while astrocytes prefer conventional scale fibers. A composite was formed from poly-carbonate urethane and the 60 nm carbon fiber. Composite substrates were thus formed using different weight percentages of this fiber in the polymer matrix. Increased astrocyte adherence and PC-12 neurite density corresponded to decreasing amounts of the carbon nanofibers in the poly-carbonate urethane matrices. Controlling carbon fiber diameter may be an approach for increasing implant contact with neurons and decreasing scar tissue formation.


Sign in / Sign up

Export Citation Format

Share Document