A comprehensive study on the adsorption-photocatalytic processes using manganese oxide-based magnetic nanocomposite with different morphology as adsorbent-photocatalyst in degradation of azo dyes under UV irradiation

2021 ◽  
Vol 44 (4) ◽  
Author(s):  
Hadigheh Dorri ◽  
Ali Zeraatkar Moghaddam ◽  
Ebrahim Ghiamati ◽  
Behnam Barikbin
2005 ◽  
Vol 480-481 ◽  
pp. 117-122 ◽  
Author(s):  
Ayumu Tateoka ◽  
Yoshika Sekine ◽  
Takamasa Tsuda ◽  
Takanobu Ohashi

Authors have successfully synthesized a new environmental catalysis which reacted with harmful formaldehyde in air at room temperature. Although manganese oxide is practically used for a major ingredient of formaldehyde removing materials, intermediates such as formate formed on the surface reduced the removal efficiency. Then, manganese oxide was photodeposited onto the surface of titanium dioxide particles which could decompose certain organic compounds with UV irradiation. It was confirmed that the complex oxide decomposed formaldehyde into carbon dioxide at room temperature. Moreover, UV irradiation enhanced the production of the carbon dioxide.


2021 ◽  
Vol 123 ◽  
pp. 105525
Author(s):  
K. Spilarewicz-Stanek ◽  
A. Jakimińska ◽  
A. Kisielewska ◽  
M. Dudek ◽  
I. Piwoński

2017 ◽  
Vol 28 (17) ◽  
pp. 12823-12838 ◽  
Author(s):  
Mojtaba Goodarzi ◽  
Sedighe Joukar ◽  
Davood Ghanbari ◽  
Kambiz Hedayati

Desalination ◽  
2010 ◽  
Vol 250 (1) ◽  
pp. 345-350 ◽  
Author(s):  
K. Soutsas ◽  
V. Karayannis ◽  
I. Poulios ◽  
A. Riga ◽  
K. Ntampegliotis ◽  
...  

2017 ◽  
Vol 76 (2) ◽  
pp. 478-489 ◽  
Author(s):  
Nihan Kaya

One of the major environmental problems is the existence of dye materials in water sources. This pollutant must be removed from water by appropriate methods. Although most of these methods are efficient for the treatment of waters contaminated with dye pollutants, they are very costly and commercially unattractive. Adsorption is one of the most popular methods for the removal of dye pollutants from water especially if the sorbent is inexpensive. Sorbents are classified as natural sorbents, commercial sorbents, and the sorbents obtained from industrial and agricultural wastes. Although commercial activated carbon is widely used in wastewater treatment applications, it is very expensive. In this study, usability of inexpensive materials – sepiolite as a natural adsorbent, and walnut shell and hazelnut shell as agricultural wastes – was investigated instead of commercial activated carbon to remove some azo dyes (methyl red, methyl orange and methyl yellow) from aqueous solution. Batch experiments were carried out to determine the effect of different adsorption parameters such as pH, initial dye concentration, contact time, adsorbent dose and temperature. The equilibrium of adsorptions was modeled using Langmuir and Freundlich isotherm models. This comprehensive study showed that these alternative adsorbents had sufficient binding capacity to remove these azo dyes from water.


RSC Advances ◽  
2017 ◽  
Vol 7 (13) ◽  
pp. 8077-8081 ◽  
Author(s):  
Tomohiko Okada ◽  
Nozomi Nozaki ◽  
Jangwon Seo ◽  
Ji Eon Kwon ◽  
Soo Young Park ◽  
...  

By UV irradiation, the interlayer space of a dried phenylazonaphthalene–magadiite diminished, while that of the phenylazobenzene-form expanded under high humidity.


Coatings ◽  
2021 ◽  
Vol 11 (4) ◽  
pp. 456
Author(s):  
Alexandru-Horaţiu Marincaş ◽  
Petru Ilea

Lithium manganese oxide is regarded as a capable cathode material for lithium-ion batteries, but it suffers from relative low conductivity, manganese dissolution in electrolyte and structural distortion from cubic to tetragonal during elevated temperature tests. This review covers a comprehensive study about the main directions taken into consideration to supress the drawbacks of lithium manganese oxide: structure doping and surface modification by coating. Regarding the doping of LiMn2O4, several perspectives are studied, which include doping with single or multiple cations, only anions and combined doping with cations and anions. Surface modification approach consists in coating with different materials like carbonaceous compounds, oxides, phosphates and solid electrolyte solutions. The modified lithium manganese oxide performs better than pristine samples, showing improved cyclability, better behaviour at high discharge c-rates and elevated temperate and improves lithium ions diffusion coefficient.


2017 ◽  
Vol 18 ◽  
pp. 159-168 ◽  
Author(s):  
Tarek S. Jamil ◽  
Haseneder Roland ◽  
Hoyer Michael ◽  
Repke Jens-Uwe

Sign in / Sign up

Export Citation Format

Share Document