scholarly journals Thermal maturity evaluation using Raman spectroscopy for oil shale samples of USA: comparisons with vitrinite reflectance and pyrolysis methods

2020 ◽  
Vol 17 (3) ◽  
pp. 567-581 ◽  
Author(s):  
Md. Golam Kibria ◽  
Souvik Das ◽  
Qin-Hong Hu ◽  
Asish R. Basu ◽  
Wen-Xuan Hu ◽  
...  
Energies ◽  
2018 ◽  
Vol 11 (6) ◽  
pp. 1406 ◽  
Author(s):  
Seyedalireza Khatibi ◽  
Mehdi Ostadhassan ◽  
David Tuschel ◽  
Thomas Gentzis ◽  
Humberto Carvajal-Ortiz

Vitrinite maturity and programmed pyrolysis are conventional methods to evaluate organic matter (OM) regarding its thermal maturity. Moreover, vitrinite reflectance analysis can be difficult if prepared samples have no primary vitrinite or dispersed widely. Raman spectroscopy is a nondestructive method that has been used in the last decade for maturity evaluation of organic matter by detecting structural transformations, however, it might suffer from fluorescence background in low mature samples. In this study, four samples of different maturities from both shale formations of Bakken (the upper and lower members) Formation were collected and analyzed with Rock-Eval (RE) and Raman spectroscopy. In the next step, portions of the same samples were then used for the isolation of kerogen and analyzed by Raman spectroscopy. Results showed that Raman spectroscopy, by detecting structural information of OM, could reflect thermal maturity parameters that were derived from programmed pyrolysis. Moreover, isolating kerogen will reduce the background noise (fluorescence) in the samples dramatically and yield a better spectrum. The study showed that thermal properties of OM could be precisely reflected in Raman signals.


2020 ◽  
Author(s):  
Thomas Theurer ◽  
David Muirhead ◽  
David Jolley

<p>Evidence of wildfire activity in deep time is preserved in the rock record as fossilised charcoal. Modern wildfire temperature is often a function of fuel type, structure and availability. These three factors are reliant upon climatic conditions and offer a potential insight into palaeoenvironmental conditions through geothermometric analysis of preserved charcoals. Much like the analysis of vitrinite reflectance as an assessor of thermal maturity, similar methodology has been applied historically to charcoal in order to obtain palaeowildfire temperatures.  Raman spectroscopy has similarly been applied to organic material as an identifier of thermal maturity, via the analysis of carbon microstructure changes with increasing temperature – however very little palaeocharcoal has been analysed via Raman spectroscopy, with no apparent application to palaeowildfire geothermometry. Through the application of Raman spectroscopy, we present the first comparison of modern pyrolyzed plant material with spectra of early Danian palaeocharcoals, associated with wildfire activity. These results indicate that Raman spectroscopy of modern wildfire charcoal facilitates a correlation between charcoal microstructure change and temperature of formation. This in turn has enabled comparison with palaeocharcoal, and the generation of reliable wildfire geothermometry. With this new methodology, we intend to further the understanding of (1) changes in palaeowildfire regimes and intensity through time (2) the interaction between climate, plant community composition and structure, and palaeowildfires  (3) correlation and comparison with existing palaeowildfire interpretive approaches. Further analysis and experimentation is required to identify the impact of fire determining factors on observed spectra to target the new approach towards interpreting current and future wildfire behaviour under climatic stress. </p>


Minerals ◽  
2020 ◽  
Vol 10 (8) ◽  
pp. 679
Author(s):  
Seyedalireza Khatibi ◽  
Arash Abarghani ◽  
Kouqi Liu ◽  
Alexandra Guedes ◽  
Bruno Valentim ◽  
...  

In order to assess a source rock for economical exploitation purposes, many parameters should be considered; regarding the geochemical aspects, the most important ones are the amount of organic matter (OM) and its quality. Quality refers to the thermal maturity level and the type of OM from which it was formed. The origin of the OM affects the ability of the deposited OM between sediments to generate oil, gas, or both with particular potential after going through thermal maturation. Vitrinite reflectance and programmed pyrolysis (for instance, Rock-Eval) are common methods for evaluating the thermal maturity of the OM and its potential to generate petroleum, but they do not provide us with answers to what extent solid bitumen is oil-prone or gas-prone, as they are bulk geochemical methods. In the present study, Raman spectroscopy (RS), as a powerful tool for studying carbonaceous materials and organic matter, was conducted on shale and coal samples and their individual macerals to show the potential of this technique in kerogen typing and to reveal the parent maceral of the examined bitumen. The proposed methodology, by exhibiting the chemical structure of different organic matters as a major secondary product in unconventional reservoirs, can also detect the behavior of solid bitumen and its hydrocarbon production potential for more accurate petroleum system evaluation.


2014 ◽  
Vol 128-129 ◽  
pp. 143-152 ◽  
Author(s):  
Ronald W.T. Wilkins ◽  
Roger Boudou ◽  
Neil Sherwood ◽  
Xianming Xiao

2011 ◽  
Vol 149 (1) ◽  
pp. 19-38 ◽  
Author(s):  
ALI SHEKARIFARD ◽  
FRANÇOIS BAUDIN ◽  
KAZEM SEYED-EMAMI ◽  
JOHANN SCHNYDER ◽  
FATIMA LAGGOUN-DEFARGE ◽  
...  

AbstractOrganic petrography and geochemical analyses have been carried out on shales, carbonaceous shales and coals of the Shemshak Group (Upper Triassic–Middle Jurassic) from 15 localities along the Alborz Range of Northern Iran. Thermal maturity of organic matter (OM) has been investigated using vitrinite reflectance, Rock-Eval pyrolysis and elemental analysis of kerogen. Reflectance of autochthonous vitrinite varies from 0.6 to 2.2% indicating thermally early-mature to over-mature OM in the Shemshak Group, in agreement with other maturity parameters used. The shales of the Shemshak Group are characterized by poor to high residual organic carbon contents (0.13 to 5.84%) and the presence of hydrogen-depleted OM, predominantly as a consequence of oxidation of OM at the time of deposition and the hydrogen loss during petroleum generation. According to light-reflected microscopy results, vitrinite/vitrinite-like macerals are dominant in the kerogen concentrates from the shaly facies. The coals and carbonaceous shales of the Shemshak Group show a wide range in organic carbon concentration (3.5 to 88.6%) and composition (inertinite- and vitrinite-rich types), and thereby different petroleum potentials. Thermal modelling results suggest that low to moderate palaeo-heat flow, ranging from 47 to 79 mW m−2 (57 mW m−2 on average), affected the Central-Eastern Alborz basin during Tertiary time, the time of maximum burial of the Shemshak Group. The maximum temperature that induced OM maturation of the Shemshak Group seems to be related to its deep burial rather than to a very strong heat flow related to an uppermost Triassic–Liassic rifting. The interval of petroleum generation in the most deeply buried part of the Shemshak Group (i.e. Tazareh section) corresponds to Middle Jurassic–Early Cretaceous times. Exhumation of the Alborz Range during Late Neogene time, especially along the axis of the Central-Eastern Alborz, where maximum vitrinite reflectance values are recorded, probably destroyed possible petroleum accumulations. However, on the northern flank of the Central-Eastern Alborz, preservation of petroleum accumulations may be expected. The northern part of the basin therefore seems the best target for petroleum exploration.


2005 ◽  
Vol 45 (1) ◽  
pp. 253
Author(s):  
D. Dawson ◽  
K. Grice ◽  
R. Alexander

A relationship has been identified between the maturity level of source rocks and the stable hydrogen isotopic compositions (δD) of extracted saturated hydrocarbons, based on the analysis of nine sediments and five crude oils from the Perth Basin (WA). The sediments cover the immature to late mature range. Distinct δD signatures are observed for the immature sediments where pristane and phytane are significantly depleted in deuterium (D) relative to the n-alkanes. With increasing maturity the difference between the δD values of n-alkanes and isoprenoids reduces as pristane and phytane become progressively enriched in D. The n-alkane–isoprenoid δD signature of the crude oils, including one from a different source facies, is similar to mature–late mature sediments representative of the peak oil–generative window. Enrichment of D in isoprenoids is attributed to isotopic exchange associated with thermal maturation. Average δD values of pristane and phytane correlate well with vitrinite reflectance, as does the biomarker maturity parameter Ts/Tm. The limited data set suggests that δD values of aliphatic hydrocarbons may be useful for establishing thermal maturity, particularly when other maturity parameters are not appropriate. Furthermore, we suggest δD values may be useful over a wider maturity range than traditional parameters, particularly at very high maturity where biomarker parameters are no longer effective.


Sign in / Sign up

Export Citation Format

Share Document