<p>Geological structure and kinematics are often the most important factors controlling the stability of high rock slopes; their characterization can provide insights that are instrumental in understanding the behaviour of a slope in addition to its evolution with time. In this research, we used a combined remote sensing-numerical modelling approach to characterize the Joffre Peak landslides (British Columbia, Canada), two rock avalanche events that occurred on May, 13<sup>th</sup> and 16<sup>th</sup> 2019. The May 13<sup>th</sup> event involved a volume of 2-3million m<sup>3</sup>, and resulted in a runout distance of 6 km. The May 16<sup>th</sup> event involved a volume of 2-3 million m<sup>3</sup>, and a runout distance of 4 km. The failure was likely promoted by permafrost degradation and reduction in shear strength along geological structures (in our simulation checked in dry condition). Using a wide range of techniques, including Structure-from-Motion photogrammetry, virtual outcrop discontinuity mapping, GIS analysis, and 3D distinct element numerical modelling, we investigated the important role that structural geology and slope kinematics played prior to and during the Joffre landslide events. In particular, we demonstrate that i) a very persistent, sub-vertical geological structures formed the lateral and rear release surfaces of the rock mass volume that failed as two discrete landslide events. The landslide blocks were separated by one such sub-vertical structure, which remains visible in the fresh landslide scar; ii) the first block, failed on May 13<sup>th</sup> 2019, involving planar sliding failure mechanism, possibly promoted by progressive failure and propagation of discontinuities along the basal surface. The detachment of this block enhanced the kinematic freedom of the second landslide block, which, on May 16<sup>th</sup>, failed as wedge/toppling mechanism; iii) the first landslide block acted as a key block; its displacement and failure provided the kinematic freedom for the occurrence of the second landslide.&#160; In this paper we show that combining remote sensing mapping and 3D numerical modelling allows for the identification of the structural geological features controlling the stability and evolution of high rock slopes in alpine environments. We also show that constraining and validating the numerical modelling results using historical data is of paramount importance to ensure that the correct failure mechanism of the landslides is simulated.</p><p>&#160;</p>
Limit States Design of Weak Rock Slopes: Proposal for Eurocode Partial Factors