Modeling, Analysis and Testing of Load Distribution for Planetary Gear Trains with 3D Carrier Pinhole Position Errors

2019 ◽  
Vol 20 (8) ◽  
pp. 1381-1394 ◽  
Author(s):  
Huimin Dong ◽  
Chu Zhang ◽  
Shaoping Bai ◽  
Delun Wang
Keyword(s):  
Load Distribution ◽  
Planetary Gear ◽  
Position Errors ◽  
Planetary Gear Trains ◽  
Modeling Analysis ◽  
Gear Trains

Analytical Predictions for the Transmission Error Excitation in Various Multiple-Mesh Gear-Trains

2003 ◽  
Author(s):  
V. Kartik ◽  
Donald R. Houser
Keyword(s):  
Load Distribution ◽  
Planetary Gear ◽  
Transmission Error ◽  
Simplex Algorithm ◽  
Finite Element Models ◽  
Contact Points ◽  
Planetary Gear Trains ◽  
Gear Trains ◽  
Local Compliance ◽  
Computationally Intensive

Transmission error has long been considered the primary exciter of gear whine noise. Previous work has resulted in the development of an analytical procedure for contact analysis of gear meshing based on plate deflection models. This procedure has been demonstrated to give good accuracy while being much less computationally intensive than finite element models. This paper extends this procedure to predict the load distribution and transmission error in multiple-mesh gear-trains. The model takes into account the effect of the load distribution at one mesh, on the load distribution and transmission error on the other meshes. The local compliance at the meshes is calculated and the kinematic constraints are used to determine the contact points. The equations of contact are linearized and solved using a modified simplex algorithm. The effect of the ‘phasing’ of the meshes is also considered. Application areas of this analysis procedure include idler gears, planetary gear-trains and split-path transmissions.

Research on Stress and Load with the Effect of Number of Teeth Planetary Gears Matching

2014 ◽  
Vol 1014 ◽  
pp. 120-123
Author(s):  
Zhi Qiang Xu ◽  
Jian Huang
Keyword(s):  
Load Distribution ◽  
Planetary Gear ◽  
Element Model ◽  
Strength Analysis ◽  
Planetary Gears ◽  
Planetary Gear Trains ◽  
Number Of Teeth ◽  
Capacity Calculation ◽  
Gear Trains ◽  
Planetary Transmission

Impact of number of tooth matching to load distribution of planetary gears is mainly investigated in this paper. The entire finite element model of planetary gear trains is established so as to analyze and calculate gear stress and number of tooth matching have an impact on load distribution homogeneity of planetary gears on the rated load working conditions. A new method of number of teeth design of planetary gear trains is put forward that number of teeth of sun wheel and number of teeth of gear ring are multiples as great as numbers of planetary gears. Load uneven coefficient of the example is proposed and solved, which provides theoretical basis on carrying capacity calculation, strength analysis and calculation of fatigue life of planetary transmission.

Investigation of Noise Features of Planetary Gear Trains Based on Human Aural Characteristic

2017 ◽  
Author(s):  
Masao Nakagawa ◽  
Dai Nishida ◽  
Deepak Sah ◽  
Toshiki Hirogaki ◽  
Eiichi Aoyama
Keyword(s):  
Gear Tooth ◽  
Structural Complexity ◽  
Planetary Gear ◽  
Transmission Error ◽  
Sound Level ◽  
Tooth Surface ◽  
Surface Error ◽  
Planetary Gear Trains ◽  
Tooth Stiffness ◽  
Gear Trains

Planetary gear trains (PGTs) are widely used in various machines owing to their many advantages. However, they suffer from problems of noise and vibration due to the structural complexity and giving rise to substantial noise, vibration, and harshness with respect to both structures and human users. In this report, the sound level from PGTs is measured in an anechoic chamber based on human aural characteristic, and basic features of sound are investigated. Gear noise is generated by the vibration force due to varying gear tooth stiffness and the vibration force due to tooth surface error, or transmission error (TE). Dynamic TE is considered to be increased because of internal and external meshing. The vibration force due to tooth surface error can be ignored owing to almost perfect tooth surface. A vibration force due to varying tooth stiffness could be a major factor.

A New Technique Based on Loops to Investigate Displacement Isomorphism in Planetary Gear Trains

2002 ◽  
Vol 124 (4) ◽  
pp. 662-675 ◽  
Author(s):  
V. V. N. R. Prasad Raju Pathapati ◽  
A. C. Rao
Keyword(s):  
Graph Isomorphism ◽  
Planetary Gear ◽  
Degree Of Freedom ◽  
Gear Train ◽  
Graph Representation ◽  
Kinematic Structure ◽  
Graph Representations ◽  
Planetary Gear Trains ◽  
Gear Trains ◽  
A New Technique

The most important step in the structural synthesis of planetary gear trains (PGTs) requires the identification of isomorphism (rotational as well as displacement) between the graphs which represent the kinematic structure of planetary gear train. Previously used methods for identifying graph isomorphism yielded incorrect results. Literature review in this area shows there is inconsistency in results from six link, one degree-of-freedom onwards. The purpose of this paper is to present an efficient methodology through the use of Loop concept and Hamming number concept to detect displacement and rotational isomorphism in PGTs in an unambiguous way. New invariants for rotational graphs and displacement graphs called geared chain hamming strings and geared chain loop hamming strings are developed respectively to identify rotational and displacement isomorphism. This paper also presents a procedure to redraw conventional graph representation that not only clarifies the kinematic structure of a PGT but also averts the problem of pseudo isomorphism. Finally a thorough analysis of existing methods is carried out using the proposed technique and the results in the category of six links one degree-of-freedom are established and an Atlas comprises of graph representations in conventional form as well as in new form is presented.

Dynamic Modeling of the Torsional Vibration of the Slewing Mechanism of a Hydraulic Excavator

2012 ◽  
Vol 253-255 ◽  
pp. 2102-2106 ◽  
Author(s):  
Xu Juan Yang ◽  
Zong Hua Wu ◽  
Zhao Jun Li ◽  
Gan Wei Cai
Keyword(s):  
Torsional Vibration ◽  
Natural Frequencies ◽  
Planetary Gear ◽  
Moment Of Inertia ◽  
Hydraulic Excavator ◽  
Planetary Gear Trains ◽  
Vibration Model ◽  
Gear Trains ◽  
The Moment ◽  
Relationship Of

A torsional vibration model of the slewing mechanism of a hydraulic excavator is developed to predict its free vibration characteristics with consideration of many fundamental factors, such as the mesh stiffness of gear pairs, the coupling relationship of a two stage planetary gear trains and the variety of moment of inertia of the input end caused by the motion of work equipment. The natural frequencies are solved using the corresponding eigenvalue problem. Taking the moment of inertia of the input end for example to illustrate the relationship between the natural frequencies of the slewing mechanism and its parameters, based on the simulation results, just the first order frequency varies significantly with the moment of inertia of the input end of the slewing mechanism.

scholarly journals The multi-attribute topological graph method and its application on power flow analysis in closed planetary gear trains

2018 ◽  
Vol 10 (8) ◽  
pp. 168781401879410 ◽  
Author(s):  
Yahui Cui ◽  
Jing Gao ◽  
Xiaomin Ji ◽  
Xintao Zhou ◽  
Haitao Yan
Keyword(s):  
Power Flow ◽  
Flow Analysis ◽  
Planetary Gear ◽  
Topological Graph ◽  
Template Model ◽  
Power Flow Analysis ◽  
Analysis Process ◽  
Planetary Gear Trains ◽  
Graphical View ◽  
Gear Trains

The concept of multi-attribute topological graph is proposed in this article to represent the characteristics of both structure and state for typical one-degree-of-freedom planar spur closed planetary gear trains. This method is well applied in power flow analysis and provides a graphical view for the types, values, directions, and transmission relationship of power flow, especially for the recirculation power representation. Furthermore, a template model of multi-attribute topological graph for closed planetary gear trains is also presented, which would be helpful to the multi-attribute topological graph generation for some certain types of closed planetary gear trains just by changing symbols in the template model. A corresponding software is also developed to make the analysis process more convenient. By inputting different parameters, the different visual results can be obtained automatically, thus benefiting engineers in conceptual design.

Sign in / Sign up

Export Citation Format

Share Document