Optical Fiber-Based Intensity-Modulated Cost-Effective Small Lean Angle Measurement Sensor

MAPAN ◽  
2021 ◽  
Author(s):  
Durga Rama Pavan Vadapalli ◽  
Koustav Dey ◽  
Sourabh Roy
2019 ◽  
Vol 53 ◽  
pp. 102066 ◽  
Author(s):  
Abdul Ghaffar ◽  
WenYi Liu ◽  
Guowen An ◽  
Yulong Hou ◽  
Farah Deeba ◽  
...  

2021 ◽  
Author(s):  
Putha Kishore ◽  
Dantala Dinakar ◽  
Manchineellu Padmavathi

The sensors presented in this chapter are fiber optic intensity modulated vibrations sensors which are non-contact (extrinsic sensor) to the vibrating object. Three sensors presented make use of non-contact vibration measurement method with plastic fiber using distinct designs, improvement of the sensor response and advantages of one sensor over the other for diverse applications. First discussed about dual plastic optical fiber vibration sensor design and its response. Secondly, discussed about 1x2 fused coupler plastic optical fiber vibration sensor design with advantages over the first one. Finally, discussed about the 2x2 fused coupler plastic optical fiber vibration sensor design along with advantages than other two methods. At the end reported the final results with comparison.


2005 ◽  
Author(s):  
Jia N. Cao ◽  
Wei X. Wang ◽  
Ya B. Zhang ◽  
Jiang Z. Fu

2020 ◽  
Vol 2 (1) ◽  
pp. 8
Author(s):  
Mohammed Majeed Alkhabet ◽  
Saad Hayatu Girei ◽  
Suriati Paiman ◽  
Norhana Arsad ◽  
Mohd Adzir Mahdi ◽  
...  

This paper describes the application of a palladium (Pd)-coated tapered optical fiber in order to develop a hydrogen (H2) sensor. A transducing channel was fabricated with multimode optical fiber (MMF) with cladding and core diameters of 125 µm and 62.5 µm, respectively, in order to enhance the evanescent field of light propagation through the fiber. The multimode optical fiber was tapered from a cladding diameter of 125 µm to a waist diameter of 20 µm, waist-length of 10 mm, and down taper and up of 5 mm, and coated with Pd using the drop-casting technique. In order to establish the palladium’s properties, various characterization techniques were applied, such as Field Emission Scanning Electron Microscopy (FESEM), Energy Dispersive X-ray (EDX), and X-ray Diffraction (XRD). The developed palladium sensor functioned reproducibly at a gas concentration of 0.125% to 1.00% H2 at room temperature in the synthetic air. In this case, the response and recovery times were 50 and 200 s, respectively. Furthermore, this study demonstrated that the production of a dependable, effective, and reproducible H2 sensor by applying a basic, cost-effective method is possible.


2015 ◽  
Vol 220-221 ◽  
pp. 396-400
Author(s):  
Lauryna Šiaudinytė ◽  
Deividas Sabaitis ◽  
Domantas Bručas ◽  
Gintaras Dmitrijev

Production of high precision circular scales is a complicated process requiring expensive equipment and complex processes to achieve. Precision angle measurement equipment tends to be very expensive and therefore not accessible to all in need. Simplification of production of such devices can lead to reducing costs of angle measurement systems ensuring easier accessibility. A new method of producing precision circular scales using low cost mass production can reduce the costs of these devices drastically. Therefore, utilising a common CD technology as the basis for such scales is analysed. This paper deals with the analysis of the newest laser cutting method for plastic circular scales. Preliminary results of manufacturing such scales are presented in the paper as well as measurements of the grating of the scale were performed. The quality of different scales manufactured using different laser types is analysed in the study. The cost – effective alternative of manufacturing circular scales is discussed in the paper.


2020 ◽  
Author(s):  
Guo Li ◽  
Yun-Fei Xia ◽  
Yi-Xiang Huang ◽  
Deniz Okat ◽  
Bo Qiu ◽  
...  

Abstract Background: Proton beam therapy (PBT) is a new-emerging cancer treatment in China. The treatment costs are high and not yet covered by Chinese public medical insurance. The advanced form of PBT, intensity-modulated proton radiation therapy (IMPT), has been confirmed to reduce normal tissue complication probability (NTCP) compared with conventional intensity-modulated photon-radiation therapy (IMRT) in patients with oropharyngeal cancer (OPC). This study evaluated the cost-effectiveness of IMPT versus IMRT for OPC patients in China, aiming at guiding proper use of PBT. Methods: On the basis of published data, a 7-state Markov model was designed for cost-effectiveness analysis, and an evaluation of average level was performed on a base case of 56-year-old under the hypothesis that IMPT could make a 25% NTCP-reduction concerning to long-term symptomatic dysphagia and xerostomia. Model robustness was examined using probabilistic sensitivity analysis, cohort analysis and tornado diagram. One-way sensitivity analyses were performed to identify cost-effective scenarios. IMPT was considered as cost-effective if the incremental cost-effectiveness ratio (ICER) was below the societal willingness-to-pay (WTP) threshold (3 times the gross domestic product per capita / quality-adjusted life year (QALY)).Results: Compared with IMRT, IMPT could provide an extra 0.724 QALYs at an additional cost of 34,926.6 US dollars ($), and made an ICER of $48,229.8/ QALY for the base case. At current WTP level of China ($30,828/QALY), cost-effective scenarios of IMPT existed in the following independent conditions: ≥ 57.3% NTCP-reduction (IMPT compared with IMRT) in dysphagia and xerostomia; patient age ≤ 38-year-old; or the cost of IMPT ≤ $37,398.1. The estimated cost-effective population that benefit from using PBT to treat OPC increased remarkably in the past 10 years with the economic growth, and reached to 559.7 million (about 40.0% of the China’s total population) in the year 2020. Conclusions: Currently, using PBT to treat OPC could be cost-effective in considerable proportion of China’s population. Considering the economic growth, the gradual increment of medical insurance coverage, as well as the proton treatment cost reduction along with more proton facility opening in the near future, it is estimated that PBT would benefit more Chinese OPC patients with respect to cost-effectiveness.


2021 ◽  
Vol 11 (3) ◽  
pp. 3822-3825

We report the findings of preliminary investigation corresponding to an optical detection technique implementing smartphone as our receiver towards quantitative assessment of heavy metal ions, namely, Cu, Zn, and Ni. Using intensity modulation, the optical responses are attained through a user-friendly app. The sensing region is made up of optical fiber whose cladding portion has been etched. Subject to varying concentrations of these metal ions, the modulated responses are attained, which reveal a declining trend. The absence of traditional parts such as a spectrophotometer makes the reported scheme cost-effective as well as field-portable.


Sign in / Sign up

Export Citation Format

Share Document