Development of Calibration Equipment for Geodetic Angle Measurement Instruments

2015 ◽  
Vol 220-221 ◽  
pp. 396-400
Author(s):  
Lauryna Šiaudinytė ◽  
Deividas Sabaitis ◽  
Domantas Bručas ◽  
Gintaras Dmitrijev
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
Angle Measurement ◽  
Measurement Instruments ◽  
Measurement Systems ◽  
Complex Processes ◽  
Cost Effective Alternative ◽  
Reducing Costs ◽  
The Cost

Production of high precision circular scales is a complicated process requiring expensive equipment and complex processes to achieve. Precision angle measurement equipment tends to be very expensive and therefore not accessible to all in need. Simplification of production of such devices can lead to reducing costs of angle measurement systems ensuring easier accessibility. A new method of producing precision circular scales using low cost mass production can reduce the costs of these devices drastically. Therefore, utilising a common CD technology as the basis for such scales is analysed. This paper deals with the analysis of the newest laser cutting method for plastic circular scales. Preliminary results of manufacturing such scales are presented in the paper as well as measurements of the grating of the scale were performed. The quality of different scales manufactured using different laser types is analysed in the study. The cost – effective alternative of manufacturing circular scales is discussed in the paper.

Janus – A New Approach to Air Combat Pilot Training

2019 ◽  
Vol 2019 (4) ◽  
pp. 7-22
Author(s):  
Georges Bridel ◽  
Zdobyslaw Goraj ◽  
Lukasz Kiszkowiak ◽  
Jean-Georges Brévot ◽  
Jean-Pierre Devaux ◽  
...  
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
High Energy ◽  
Training System ◽  
Embedded Sensors ◽  
Pilot Training ◽  
New Approach ◽  
Combat Aircraft ◽  
Air Combat ◽  
The Cost

Abstract Advanced jet training still relies on old concepts and solutions that are no longer efficient when considering the current and forthcoming changes in air combat. The cost of those old solutions to develop and maintain combat pilot skills are important, adding even more constraints to the training limitations. The requirement of having a trainer aircraft able to perform also light combat aircraft operational mission is adding unnecessary complexity and cost without any real operational advantages to air combat mission training. Thanks to emerging technologies, the JANUS project will study the feasibility of a brand-new concept of agile manoeuvrable training aircraft and an integrated training system, able to provide a live, virtual and constructive environment. The JANUS concept is based on a lightweight, low-cost, high energy aircraft associated to a ground based Integrated Training System providing simulated and emulated signals, simulated and real opponents, combined with real-time feedback on pilot’s physiological characteristics: traditionally embedded sensors are replaced with emulated signals, simulated opponents are proposed to the pilot, enabling out of sight engagement. JANUS is also providing new cost effective and more realistic solutions for “Red air aircraft” missions, organised in so-called “Aggressor Squadrons”.

scholarly journals OP0198-HPR A STRUCTURED MODEL FOR OA CARE IN PRIMARY HEALTHCARE IS A COST-EFFECTIVE ALTERNATIVE COMPARED TO USUAL CARE FOR PEOPLE WITH HIP AND KNEE OA

2021 ◽  
Vol 80 (Suppl 1) ◽  
pp. 119-120
Author(s):  
N. Østerås ◽  
E. Aas ◽  
T. Moseng ◽  
L. Van Bodegom-Vos ◽  
K. Dziedzic ◽  
...  
Keyword(s):  
Usual Care ◽  
Primary Healthcare ◽  
Intervention Group ◽  
Cost Effective ◽  
Cost Utility ◽  
Control Group ◽  
Structured Model ◽  
Knee Oa ◽  
Cost Effective Alternative ◽  
The Cost

Background:To improve quality of care for patients with hip and knee osteoarthritis (OA), a structured model for integrated OA care was developed based on international treatment recommendations. A previous analysis of a cluster RCT (cRCT) showed that compared to usual care, the intervention group reported higher quality of care and greater satisfaction with care. Also, more patients were treated according to international guidelines and fulfilled recommendations for physical activity at the 6-month follow-up.Objectives:To assess the cost-utility of a structured model for hip or knee OA care.Methods:A cRCT with stepped-wedge cohort design was conducted in 6 Norwegian municipalities (clusters) in 2015-17. The OA care model was implemented in one cluster at the time by switching from “usual care” to the structured model. The implementation of the model was facilitated by interactive workshops for general practitioners (GPs) and physiotherapists (PTs) with an update on OA treatment recommendations. The GPs explained the OA diagnosis and treatment alternatives, provided pharmacological treatment when appropriate, and suggested referral to physiotherapy. The PT-led patient OA education programme was group-based and lasted 3 hours followed by an 8–12-week individually tailored resistance exercise programme with twice weekly 1-hour supervised group sessions (5–10 patients per PT). An optional 10-hours Healthy Eating Program was available. Participants were ≥45 years with symptomatic hip or knee OA.Costs were measured from the healthcare perspective and collected from several sources. Patients self-reported visits in primary healthcare at 3, 6, 9 and 12 months. Secondary healthcare visits and joint surgery data were extracted from the Norwegian Patient Register. The health outcome, quality-adjusted life-year (QALY), was estimated based on the EQ-5D-5L scores at baseline, 3, 6, 9 and 12 months. The result of the cost-utility analysis was reported using the incremental cost-effectiveness ratio (ICER), defined as the incremental costs relative to incremental QALYs (QALYs gained). Based on Norwegian guidelines, the threshold is €27500. Sensitivity analyses were performed using bootstrapping to assess the robustness of reported results and presented in a cost-effectiveness plane (Figure 1).Results:The 393 patients’ mean age was 63 years (SD 9.6) and 74% were women. 109 patients were recruited during control periods (control group), and 284 patients were recruited during interventions periods (intervention group). Only the intervention group had a significant increase in EQ-5D-5L utility scores from baseline to 12 months follow-up (mean change 0.03; 95% CI 0.01, 0.05) with QALYs gained: 0.02 (95% CI -0.08, 0.12). The structured OA model cost approx. €301 p.p. with an additional €50 for the Healthy Eating Program. Total 12 months healthcare cost p.p. was €1281 in the intervention and €3147 in the control group, resulting in an incremental cost of -€1866 (95% CI -3147, -584) p.p. Costs related to surgical procedures had the largest impact on total healthcare costs in both groups. During the 12-months follow-up period, 5% (n=14) in the intervention compared to 12% (n=13) in the control group underwent joint surgery; resulting in a mean surgical procedure cost of €553 p.p. in the intervention as compared to €1624 p.p. in the control group. The ICER was -€93300, indicating that the OA care model resulted in QALYs gained and cost-savings. At a threshold of €27500, it is 99% likely that the OA care model is a cost-effective alternative.Conclusion:The results of the cost-utility analysis show that implementing a structured model for OA care in primary healthcare based on international guidelines is highly likely a cost-effective alternative compared to usual care for people with hip and knee OA. More studies are needed to confirm this finding, but this study results indicate that implementing structured OA care models in primary healthcare may be beneficial for the individual as well as for the society.Disclosure of Interests:None declared

scholarly journals Optical spin-symmetry breaking for high-efficiency directional helicity-multiplexed metaholograms

2021 ◽  
Vol 7 (1) ◽  
Author(s):  
Muhammad Ashar Naveed ◽  
Muhammad Afnan Ansari ◽  
Inki Kim ◽  
Trevon Badloe ◽  
Joohoon Kim ◽  
...  
Keyword(s):  
High Efficiency ◽  
Spin Symmetry ◽  
Cost Effective ◽  
Dielectric Materials ◽  
Additional Degree ◽  
Cost Effective Alternative ◽  
Spin Orbit Interactions ◽  
Smart Mobile ◽  
The Cost ◽  
Hydrogenated Amorphous

AbstractHelicity-multiplexed metasurfaces based on symmetric spin–orbit interactions (SOIs) have practical limits because they cannot provide central-symmetric holographic imaging. Asymmetric SOIs can effectively address such limitations, with several exciting applications in various fields ranging from asymmetric data inscription in communications to dual side displays in smart mobile devices. Low-loss dielectric materials provide an excellent platform for realizing such exotic phenomena efficiently. In this paper, we demonstrate an asymmetric SOI-dependent transmission-type metasurface in the visible domain using hydrogenated amorphous silicon (a-Si:H) nanoresonators. The proposed design approach is equipped with an additional degree of freedom in designing bi-directional helicity-multiplexed metasurfaces by breaking the conventional limit imposed by the symmetric SOI in half employment of metasurfaces for one circular handedness. Two on-axis, distinct wavefronts are produced with high transmission efficiencies, demonstrating the concept of asymmetric wavefront generation in two antiparallel directions. Additionally, the CMOS compatibility of a-Si:H makes it a cost-effective alternative to gallium nitride (GaN) and titanium dioxide (TiO2) for visible light. The cost-effective fabrication and simplicity of the proposed design technique provide an excellent candidate for high-efficiency, multifunctional, and chip-integrated demonstration of various phenomena.

scholarly journals Remote Reflectivity Sensor for Industrial Applications

Sensors ◽  
2021 ◽  
Vol 21 (4) ◽  
pp. 1301
Author(s):  
Federico Cavedo ◽  
Parisa Esmaili ◽  
Michele Norgia
Keyword(s):  
Low Cost ◽  
Cost Effective ◽  
Industrial Applications ◽  
Interference Immunity ◽  
Surface Reflection ◽  
Measurement Systems ◽  
Digital Detector ◽  
Reflected Light ◽  
Surface Optical ◽  
Diffused Light

A low-cost optical reflectivity sensor is proposed in this paper, able to detect the presence of objects or surface optical properties variations, at a distance of up to 20 m. A collimated laser beam is pulsed at 10 kHz, and a synchronous digital detector coherently measures the back-diffused light collected through a 1-inch biconvex lens. The sensor is a cost-effective solution for punctual measurement of the surface reflection at different distances. To enhance the interference immunity, an algorithm based on a double-side digital baseline restorer is proposed and implemented to accurately detect the amplitude of the reflected light. As results show, the sensor is robust against ambient light and shows a strong sensitivity on a wide reflection range. The capability of the proposed sensor was evaluated experimentally for object detection and recognition, in addition to dedicated measurement systems, like remote encoders or keyphasors, realized far from the object to be measured.

scholarly journals Growth and biochemical composition of Chlorella vulgaris in different growth media

2013 ◽  
Vol 85 (4) ◽  
pp. 1427-1438 ◽  
Author(s):  
MATHIAS A. CHIA ◽  
ANA T. LOMBARDI ◽  
MARIA DA GRACA G. MELAO
Keyword(s):  
Biomass Production ◽  
Chlorella Vulgaris ◽  
Biochemical Composition ◽  
Physiological Response ◽  
Low Cost ◽  
Cost Effective ◽  
Growth Conditions ◽  
Growth Media ◽  
Continuous Cultures ◽  
The Cost

The need for clean and low-cost algae production demands for investigations on algal physiological response under different growth conditions. In this research, we investigated the growth, biomass production and biochemical composition of Chlorella vulgaris using semi-continuous cultures employing three growth media (LC Oligo, Chu 10 and WC media). The highest cell density was obtained in LC Oligo, while the lowest in Chu medium. Chlorophyll a, carbohydrate and protein concentrations and yield were highest in Chu and LC Oligo media. Lipid class analysis showed that hydrocarbons (HC), sterol esthers (SE), free fatty acids (FFA), aliphatic alcohols (ALC), acetone mobile polar lipids (AMPL) and phospholipids (PL) concentrations and yields were highest in the Chu medium. Triglyceride (TAG) and sterol (ST) concentrations were highest in the LC Oligo medium. The results suggested that for cost effective cultivation, LC Oligo medium is the best choice among those studied, as it saved the cost of buying vitamins and EDTA associated with the other growth media, while at the same time resulted in the best growth performance and biomass production.

An Innovative Cost-Effective Approach for Characterization of Removable Prosthesis - Case Series

2021 ◽  
Author(s):  
Tushar
Keyword(s):  
Case Series ◽  
Cost Effective ◽  
Functional Rehabilitation ◽  
Denture Base ◽  
Cost Effective Approach ◽  
Removable Denture ◽  
Removable Prosthesis ◽  
Cost Effective Alternative ◽  
The Aesthetic ◽  
The Cost

Esthetics plays a crucial role in rehabilitation of removable dentures to achieve a pleasant smile. Denture esthetics is the effect produced, which improves the beauty and attractiveness of a person. With the advances of implants and ceramics, the conventional removable denture needs to be updated. denture characterization is a must in avoiding denture look and giving natural look. Giving the prosthesis as close as possible to the natural apparatus before the tooth loss is the key to a successful prosthetic, esthetic and functional rehabilitation. As a prosthodontist dealing in fulfilling the aesthetic challenges an economical alternative to high-end costly procedures is a must considering the Indian scenario, keeping in mind the biocompatibility and longevity of the treatment. As per literature light cure, gum staining is one of the techniques for masking denture base color and imparting natural color to mucosa but considering the cost involved many patients requiring aesthetic enhancement of prosthesis avoid going for such treatment thereby compromising their aesthetic. the present case series describe an innovative cost-effective alternative to the previously describe technique for masking the denture base color by using composite mixed with stains to replicate the natural apparatus.

Addressing the Scottish burden of wounds through the Lens of Profound Knowledge

2021 ◽  
Vol 30 (Sup20) ◽  
pp. S34-S40
Author(s):  
Jenni MacDonald
Keyword(s):  
Patient Outcomes ◽  
Wound Care ◽  
Cost Effective ◽  
Theory Of Knowledge ◽  
Care Needs ◽  
Profound Knowledge ◽  
The Cost ◽  
Improve Patient ◽  
Growing Population

The prevalence of wounds and the cost of treating them are increasing year on year. Improving the quality of wound care will improve patient outcomes and is a financial necessity. The Lens of Profound Knowledge is a tool that can be used to support quality improvement and identify where action is needed. It allows exploration of an organisation through four aspects—appreciate the system, understanding variation, psychology, and theory of knowledge—and working on all four aspects simultaneously is believed to increase the likelihood of achieving improvement. Improvements at and between all levels—microsystem (such as frontline services), mesosystem (health boards) and macrosystem (NHS Scotland)—would reduce variation in practice and prove to be both clinically and cost-effective. Given the rapidly growing population of people with unhealed wounds, wound care needs to be valued at all system levels and be adequately resourced.

scholarly journals Cost–effectiveness and cost-benefit analysis of oliceridine in the treatment of acute pain

2021 ◽  
Author(s):  
Kit N Simpson ◽  
Michael J Fossler ◽  
Linda Wase ◽  
Mark A Demitrack
Keyword(s):  
Cost Benefit Analysis ◽  
Cost Savings ◽  
Cost Benefit ◽  
Cost Effective ◽  
Adverse Outcomes ◽  
Protein Signaling ◽  
Opioid Receptor Agonist ◽  
Cost Effective Alternative ◽  
Μ Opioid Receptor ◽  
The Cost

Aim: Oliceridine, a new class of μ-opioid receptor agonist, is selective for G-protein signaling (analgesia) with limited recruitment of β-arrestin (associated with adverse outcomes) and may provide a cost-effective alternative versus conventional opioid morphine for postoperative pain. Patients & methods: Using a decision tree with a 24-h time horizon, we calculated costs for medication and management of three most common adverse events (AEs; oxygen saturation <90%, vomiting and somnolence) following postoperative oliceridine or morphine use. Results: Using oliceridine, the cost for managing AEs was US$528,424 versus $852,429 for morphine, with a net cost savings of $324,005. Conclusion: Oliceridine has a favorable overall impact on the total cost of postoperative care compared with the use of the conventional opioid morphine.

scholarly journals BUDGET UAV SYSTEMS FOR THE PROSPECTION OF SMALL- AND MEDIUM-SCALE ARCHAEOLOGICAL SITES

2016 ◽  
Vol XLI-B1 ◽  
pp. 971-977 ◽  
Author(s):  
W. Ostrowski ◽  
K. Hanus
Keyword(s):  
Low Cost ◽  
Planning System ◽  
Archaeological Sites ◽  
Quality Of Data ◽  
Computing Power ◽  
Medium Scale ◽  
The Cost ◽  
User Friendly ◽  
Operational Range

One of the popular uses of UAVs in photogrammetry is providing an archaeological documentation. A wide offer of low-cost (consumer) grade UAVs, as well as the popularity of user-friendly photogrammetric software allowing obtaining satisfying results, contribute to facilitating the process of preparing documentation for small archaeological sites. However, using solutions of this kind is much more problematic for larger areas. The limited possibilities of autonomous flight makes it significantly harder to obtain data for areas too large to be covered during a single mission. Moreover, sometimes the platforms used are not equipped with telemetry systems, which makes navigating and guaranteeing a similar quality of data during separate flights difficult. The simplest solution is using a better UAV, however the cost of devices of such type often exceeds the financial capabilities of archaeological expeditions. &lt;br&gt;&lt;br&gt; The aim of this article is to present methodology allowing obtaining data for medium scale areas using only a basic UAV. The proposed methodology assumes using a simple multirotor, not equipped with any flight planning system or telemetry. Navigating of the platform is based solely on live-view images sent from the camera attached to the UAV. The presented survey was carried out using a simple GoPro camera which, from the perspective of photogrammetric use, was not the optimal configuration due to the fish eye geometry of the camera. Another limitation is the actual operational range of UAVs which in the case of cheaper systems, rarely exceeds 1 kilometre and is in fact often much smaller. Therefore the surveyed area must be divided into sub-blocks which correspond to the range of the drone. It is inconvenient since the blocks must overlap, so that they will later be merged during their processing. This increases the length of required flights as well as the computing power necessary to process a greater number of images. &lt;br&gt;&lt;br&gt; These issues make prospection highly inconvenient, but not impossible. Our paper presents our experiences through two case studies: surveys conducted in Nepal under the aegis of UNESCO, and works carried out as a part of a Polish archaeological expedition in Cyprus, which both prove that the proposed methodology allows obtaining satisfying results. The article is an important voice in the ongoing debate between commercial and academic archaeologists who discuss the balance between the required standards of conducting archaeological works and economic capabilities of archaeological missions.

scholarly journals Economic Evaluation of Home Care for Stroke Patients Compared to Hospital Care: A Systematic Review

Health Scope ◽  
2021 ◽  
Vol 10 (2) ◽  
Author(s):  
Maryam Khoramrooz ◽  
Asra Asgharzadeh ◽  
Saeide Alidoost ◽  
Zeynab Foroughi ◽  
Saber Azami ◽  
...  
Keyword(s):  
Systematic Review ◽  
Economic Evaluation ◽  
Home Care ◽  
Hospital Care ◽  
Cost Effective ◽  
Stroke Patients ◽  
Life Years ◽  
Effective Option ◽  
The Cost

Context: Stroke is one of the main causes of premature death and disability, imposing significant costs on the healthcare system, especially due to expensive hospital care. Home care service is one of the interventions used in the last two decades to reduce the cost of services provided for stroke patients in different countries. Objectives: The present study aimed to systematically review studies related to the economic evaluation of home care compared to hospital care for stroke patients. Data Sources: A search was conducted between January 1990 and January 2021. PubMed, Scopus, Web of Science, and Embase databases were searched systematically. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines were used to select the studies. Data Extraction: To evaluate the quality of studies included in this systematic review, Drummond’s ten-item checklist was used. Results: Five economic evaluation studies were included in this review. The included studies reported different results regarding the effect of home care on improving different indicators and the cost-effectiveness ratio of home care to hospital care. Most previous studies reported that home care is a more cost-effective option for improving many indicators, such as physical function and quality-adjusted life years (QALY), and for reducing mortality and institutionalization, compared to hospital care. Conclusions: Home care is a more cost-effective option than hospital care for stroke patients with regard to some indicators, such as the Barthel index for Activities of Daily Living, Modified Rankin Scale (mRS), quality of life, mortality, and institutionalization. However, there are some exemptions to this conclusion. Due to limitations, such as heterogeneity of interventions in the existing studies, different levels of patients’ disabilities, different perspectives toward economic evaluation, and differences in the healthcare systems of countries, further research is needed according to the context of each country based on clinical trials.

Sign in / Sign up

Export Citation Format

Share Document