Three-dimensional particle behavior using defocusing method in micro-toroidal vortex generated by optoelectrokinetic flow

2018 ◽  
Vol 21 (4) ◽  
pp. 569-583 ◽  
Author(s):  
Dong Kim ◽  
Yining Ma ◽  
Kyung Chun Kim
1976 ◽  
Vol 71 ◽  
pp. 345-351
Author(s):  
S. I. Vainshtein

It is well know that the ‘dynamo’ theory has a number of vetoes; e.g. axisymmetric, two-dimensional, central-symmetric, etc. dynamo are impossible. In principle, the problem is essentially three-dimensional in any coordinate system. This is the main difficulty of both the theory itself and its possible applications. In fact, one prefers to believe that, for example, a non-rigid body-rotating star or convection in the Earth's nucleus possesses axis symmetry. However, due to the above vetoes one has to add finer effects (Coriolis strength, density, inhomogeneity) to create asymmetrical convection. On the other hand, the authors try to find the most simple movements with minimum deviations from axial symmetry. Thus, the Herzenberg's dynamo (Herzenberg, 1958) is realized by two rotating cylinders, axes of which are parallel to each other (see also Galaitis, 1973; Galaitis and Freinberg, 1974), the Lortz's dynamo-spiral movement (Lortz, 1968; Ponomarenko, 1973). Nevertheless, the mentioned vetoes possess a common feature, the assumption regarding the symmetry extends both to the movement and to the field. Hence, it makes sense to raise a question whether symmetric movements are able to generate an asymmetric field. A positive answer to this question, in particular, is given by Tverskoy's model (Tverskoy, 1966) – the toroidal vortex. The latter possesses axial symmetry. Nevertheless, the toroidal vortex is a complex motion; we will proceed along the path of a minimum simplification.


2019 ◽  
Vol 99 (1) ◽  
Author(s):  
Thomas Sherman ◽  
Jeffrey D. Hyman ◽  
Diogo Bolster ◽  
Nataliia Makedonska ◽  
Gowri Srinivasan

1986 ◽  
Vol 163 ◽  
pp. 439-458 ◽  
Author(s):  
Promode R. Bandyopadhyay

Flow-visualization studies in transitional pipe flow are used to reveal the mechanism responsible for the self-sustenance of a turbulent equilibrium puff. The upstream laminar fluid continuously enters the relatively-slower-moving turbulent puff around the pipe centre. The passage of this high-speed laminar plug flow past the slower fluid that resides near the wall at the upstream interface leads to the shedding of a train of three-dimensional wake-like vortices near the wall. A helical motion near the upstream interface is associated with the vortex-shedding process. The remainder of the puff is a cone of turbulence filled with these wake-like vortices that are decaying slowly; the prominent feature of the decay region is the longitudinal vortices that are apparently undergoing stretching. No toroidal vortex has been observed in the instantaneous flow field at the upstream interface of an individual puff. On the other hand, the wake-like vortices reported here have not been observed before because their three-dimensional and random nature does not allow detection by an ensemble-averaging that is not phase-referenced appropriately.


2016 ◽  
Vol 18 (5) ◽  
pp. 3832-3837 ◽  
Author(s):  
K. Dradrach ◽  
S. Bartkiewicz ◽  
A. Miniewicz

Using the direct coupling mechanism of light with a liquid via molecular absorption, i.e. the opto-thermal effect, we demonstrate the formation of well-controlled three-dimensional circular flows, i.e. a toroidal vortex, inside the liquid crystal (LC) droplet placed on a glass plate in its isotropic phase.


2003 ◽  
Vol 127 (4) ◽  
pp. 679-688 ◽  
Author(s):  
A. Pfau ◽  
J. Schlienger ◽  
D. Rusch ◽  
A. I. Kalfas ◽  
R. S. Abhari

This paper focuses on the flow within the inlet cavity of a turbine rotor tip labyrinth seal of a two stage axial research turbine. Highly resolved, steady and unsteady three-dimensional flow data are presented. The probes used here are a miniature five-hole probe of 0.9 mm head diameter and the novel virtual four sensor fast response aerodynamic probe (FRAP) with a head diameter of 0.84mm. The cavity flow itself is not only a loss producing area due to mixing and vortex stretching, it also adversely affects the following rotor passage through the fluid that is spilled into the main flow. The associated fluctuating mass flow has a relatively low total pressure and results in a negative incidence to the rotor tip blade profile section. The dominating kinematic flow feature in the region between cavity and main flow is a toroidal vortex, which is swirling at high circumferential velocity. It is fed by strong shear and end wall fluid from the pressure side of the stator passage. The static pressure field interaction between the moving rotor leading edges and the stator trailing edges is one driving force of the cavity flow. It forces the toroidal vortex to be stretched in space and time. A comprehensive flow model including the drivers of this toroidal vortex is proposed. This labyrinth seal configuration results in about 1.6% turbine efficiency reduction. This is the first in a series of papers focusing on turbine loss mechanisms in shrouded axial turbines. Additional measurements have been made with variations in seal clearance gap. Initial indications show that variation in the gap has a major effect on flow structures and turbine loss.


1967 ◽  
Vol 89 (2) ◽  
pp. 177-184 ◽  
Author(s):  
R. J. Hanold ◽  
J. R. Moszynski

This investigation concerns the application of a flow visualization technique to obtain a quantitative and qualitative description of the secondary flow associated with a slowly oscillating disk. Included in the description is a systematic study of the flow behavior as a function of the Reynolds number. The three-dimensional character of the flow is verified and the development of a toroidal vortex both above and below the oscillating disk is illustrated. The experiments are performed in a vessel similar in design to a typical oscillating body viscometer. The effect of the Reynolds number on the damping rate of the disk is investigated. The influence of natural convective flows on the magnitude and reproducibility of the damping rate is obtained. The development of a secondary flow in the form of a toroidal vortex for both the rotating disk and rotating sphere is also illustrated.


1966 ◽  
Vol 25 ◽  
pp. 227-229 ◽  
Author(s):  
D. Brouwer

The paper presents a summary of the results obtained by C. J. Cohen and E. C. Hubbard, who established by numerical integration that a resonance relation exists between the orbits of Neptune and Pluto. The problem may be explored further by approximating the motion of Pluto by that of a particle with negligible mass in the three-dimensional (circular) restricted problem. The mass of Pluto and the eccentricity of Neptune's orbit are ignored in this approximation. Significant features of the problem appear to be the presence of two critical arguments and the possibility that the orbit may be related to a periodic orbit of the third kind.


Sign in / Sign up

Export Citation Format

Share Document