Utilization of device parameters to assess the performance of a monocrystalline solar module under varied temperature and irradiance

2021 ◽  
Author(s):  
Darya R. Ahmed ◽  
Haval M. Abdullah ◽  
Fahmi F. Muhammadsharif
Author(s):  
Luigi Vesce ◽  
Maurizio Stefanelli ◽  
Fabio Matteocci ◽  
Luigi Angelo Castriotta ◽  
Enrico Lamanna ◽  
...  
Keyword(s):  

2020 ◽  
Vol 67 (1) ◽  
pp. 16-21
Author(s):  
Sergey M. Bakirov ◽  
Sergey S. Eliseev

The modern level of agriculture is described by the introduction of renewable energy sources. New generation sprinkler machines are being put into production, in the power system of which solar panels are used. One of the factors that negatively affect the performance of solar cells in an open field is their dusting, which is formed as a result of dust storms and wind. Cleaning of the battery panels is carried out in various ways: manual, semi-automatic and automatic. Dust cleaning is included in maintenance. (Research purpose) The research purpose is to determine the conditions for performing the maintenance, which consists in cleaning solar panels in the field. (Materials and methods) Theoretical (analysis, hypothesis design), empirical (observation, testing), experimental (ascertaining experiment) methods has been used during research. (Results and discussion) The article describes an introduced parameter for estimating the level of dusting. The power loss indicator shows the ratio of the power of the dusted module to the power of the clean module. Unscheduled maintenance is affected by the distance of the solar module from the repair point, the power of the solar module, the loss from dusting, the frequency of maintenance and cost indicators. (Conclusions) It has been found the dependence of maintenance period of the solar module of the sprinkler machine on the distance to the sprinkler machine, to the point of maintenance and repair, the power loss coefficient in case of dusting of the solar module, the cost of performing maintenance, as well as the frequency of maintenance. Article describes the boundaries of the choice of operating mode of the sprinkler between unscheduled maintenance for cleaning the solar module and the acceptance of additional power of the sprinkler power supply system according to the criterion of minimum operating costs.


2016 ◽  
Author(s):  
Yuki Kudo ◽  
Akinori Sato ◽  
Kazutaka Kimura ◽  
Shoichi Iwamoto ◽  
Hiroyuki Ohba ◽  
...  
Keyword(s):  

Aerospace ◽  
2019 ◽  
Vol 6 (5) ◽  
pp. 61 ◽  
Author(s):  
Jesus Gonzalez-Llorente ◽  
Aleksander A. Lidtke ◽  
Ken Hatanaka ◽  
Ryo Kawauchi ◽  
Kei-Ichi Okuyama

As small satellites are becoming more widespread for new businesses and applications, the development time, failure rate and cost of the spacecraft must be reduced. One of the systems with the highest cost and the most frequent failure in the satellite is the Electrical Power System (EPS). One approach to achieve rapid development times while reducing the cost and failure rate is using scalable modules. We propose a solar module integrated converter (SMIC) and its verification process as a key component for power generation in EPS. SMIC integrates the solar array, its regulators and the telemetry acquisition unit. This paper details the design and verification process of the SMIC and presents the in-orbit results of 12 SMICs used in Ten-Koh satellite, which was developed in less than 1.5 years. The in-orbit data received since the launch reveal that solar module withstands not only the launching environment of H-IIA rocket but also more than 1500 orbits in LEO. The modular approach allowed the design, implementation and qualification of only one module, followed by manufacturing and integration of 12 subsequent flight units. The approach with the solar module can be followed in other components of the EPS such as battery and power regulators.


2013 ◽  
Author(s):  
Carissa N. Eisler ◽  
Emily D. Kosten ◽  
Emily C. Warmann ◽  
Harry A. Atwater

2021 ◽  
Vol 11 (2) ◽  
pp. 727 ◽  
Author(s):  
Myeong-Hwan Hwang ◽  
Young-Gon Kim ◽  
Hae-Sol Lee ◽  
Young-Dae Kim ◽  
Hyun-Rok Cha

In recent years, photovoltaic (PV) power generation has attracted considerable attention as a new eco-friendly and renewable energy generation technology. With the recent development of semiconductor manufacturing technologies, PV power generation is gradually increasing. In this paper, we analyze the types of defects that form in PV power generation panels and propose a method for enhancing the productivity and efficiency of PV power stations by determining the defects of aging PV modules based on their temperature, power output, and panel images. The method proposed in the paper allows the replacement of individual panels that are experiencing a malfunction, thereby reducing the output loss of solar power generation plants. The aim is to develop a method that enables users to immediately check the type of failures among the six failure types that frequently occur in aging PV panels—namely, hotspot, panel breakage, connector breakage, busbar breakage, panel cell overheating, and diode failure—based on thermal images by using the failure detection system. By comparing the data acquired in the study with the thermal images of a PV power station, efficiency is increased by detecting solar module faults in deteriorated photovoltaic power plants.


2012 ◽  
Author(s):  
V. Gâté ◽  
Y. Jourlin ◽  
M. Langlet ◽  
F. Vocanson ◽  
O. Parriaux ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document