scholarly journals Significant strain-rate dependence of sensing behavior in TiO2@carbon fibre/PDMS composites for flexible strain sensors

2021 ◽  
Author(s):  
Fan Zhang ◽  
Hailong Hu ◽  
Simin Hu ◽  
Jianling Yue
Keyword(s):  
Carbon Fibre ◽  
Strain Rate ◽  
Flexible Electronics ◽  
Strain Sensor ◽  
High Sensitivity ◽  
Small Strain ◽  
Strain Sensors ◽  
Gauge Factor ◽  
Hydrothermal Route ◽  
Composite Strain

AbstractCarbon fibre (CF) embedded into elastomeric media has been attracting incredible interest as flexible strain sensors in the application of skin electronics owing to their high sensitivity in a very small strain gauge. To further improve the sensitivity of CF/PDMS composite strain sensor, the relatively low temperature prepared TiO2 nanowire via hydrothermal route was employed herein to functionalize CF. The results showed a significant increase in the sensitivity of the TiO2@CF/PDMS composite strain sensors which was reflected by the calculated gauge factor. As the prepared TiO2 nanowire vertically embraced the surroundings of the CF, the introduced TiO2 nanowire contributed to a highly porous structure which played a predominant role in improving the sensitivity of strain sensors. Moreover, the significant strain rate dependent behavior of TiO2@CF/PDMS strain sensor was revealed when performing monotonic tests at varied strain rate. Therefore, introducing TiO2 nanowire on CF offers a new technique for fabricating flexible strain sensors with improved sensitivity for the application of flexible electronics.

Ultra-stretchable and highly sensitive strain sensor based on gradient structure carbon nanotubes

Nanoscale ◽  
2018 ◽  
Vol 10 (28) ◽  
pp. 13599-13606 ◽  
Author(s):  
Binghao Liang ◽  
Zhiqiang Lin ◽  
Wenjun Chen ◽  
Zhongfu He ◽  
Jing Zhong ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Strain Sensor ◽  
High Sensitivity ◽  
Strain Sensors ◽  
Sensitive Strain ◽  
Gauge Factor ◽  
Gradient Structure ◽  
Highly Sensitive ◽  
Highly Stretchable

A highly stretchable and sensitive strain sensor based on a gradient carbon nanotube was developed. The strain sensors show an unprecedented combination of both high sensitivity (gauge factor = 13.5) and ultra-stretchability (>550%).

scholarly journals Highly Sensitive and Stretchable c-MWCNTs/PPy Embedded Multidirectional Strain Sensor Based on Double Elastic Fabric for Human Motion Detection

Nanomaterials ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 2333
Author(s):  
Huiying Shen ◽  
Huizhen Ke ◽  
Jingdong Feng ◽  
Chenyu Jiang ◽  
Qufu Wei ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Large Scale ◽  
Strain Sensor ◽  
High Sensitivity ◽  
Human Motion ◽  
Strain Sensors ◽  
Gauge Factor ◽  
Wearable Electronics ◽  
Synovial Joint ◽  
Human Motion Detection

Owing to the multi-dimensional complexity of human motions, traditional uniaxial strain sensors lack the accuracy in monitoring dynamic body motions working in different directions, thus multidirectional strain sensors with excellent electromechanical performance are urgently in need. Towards this goal, in this work, a stretchable biaxial strain sensor based on double elastic fabric (DEF) was developed by incorporating carboxylic multi-walled carbon nanotubes(c-MWCNTs) and polypyrrole (PPy) into fabric through simple, scalable soaking and adsorption-oxidizing methods. The fabricated DEF/c-MWCNTs/PPy strain sensor exhibited outstanding anisotropic strain sensing performance, including relatively high sensitivity with the maximum gauge factor (GF) of 5.2, good stretchability of over 80%, fast response time < 100 ms, favorable electromechanical stability, and durability for over 800 stretching–releasing cycles. Moreover, applications of DEF/c-MWCNTs/PPy strain sensor for wearable devices were also reported, which were used for detecting human subtle motions and dynamic large-scale motions. The unconventional applications of DEF/c-MWCNTs/PPy strain sensor were also demonstrated by monitoring complex multi-degrees-of-freedom synovial joint motions of human body, such as neck and shoulder movements, suggesting that such materials showed a great potential to be applied in wearable electronics and personal healthcare monitoring.

scholarly journals High-Performance Wearable Strain Sensor Based on MXene@Cotton Fabric with Network Structure

2021 ◽  
Author(s):  
Lu Liu ◽  
Libo Wang ◽  
Xuqing Liu ◽  
Wenfeng Yuan ◽  
Mengmeng Yuan ◽  
...  
Keyword(s):  
Cotton Fabric ◽  
High Performance ◽  
Mechanical Performance ◽  
Active Material ◽  
Large Body ◽  
Strain Sensor ◽  
Strain Range ◽  
High Sensitivity ◽  
Strain Sensors ◽  
Gauge Factor

Abstract Although 2D nanomaterials such as MXene Ti3C2Tx have been used in flexible electronic devices for their unique properties such as high conductivity, excellent mechanical performance, flexibility, and good hydrophilicity, less research has focused on of MXene-based cotton fabric strain sensors. Moreover, fabrication of wearable strain sensors with a low cost, high sensitivity, good biocompatibility, and broad sensing range is still a challenge. In this work, a high-performance wearable strain sensor composed of 2D MXene d-Ti3C2Tx nanomaterials and cotton fabric is reported. As the active material in the sensor, MXene d-Ti3C2Tx exhibited an excellent conductivity and hydrophilicity and adhered well to the fabric fibers by electrostatic adsorption. Due to the unique structure of the fabric substrate and the properties of MXene sheets, the fabricated pressure sensor achieved a high sensitivity. The gauge factor of the MXene@cotton fabric strain sensor reached up to 4.11 within the strain range of 15 %. Meanwhile, the sensor possessed high durability (>500 cycles) and a low strain detection limit of 0.3%. Finally, the encapsulated strain sensor was used to detect subtle or large body movements and exhibited a rapid response. This study shows that the MXene@cotton fabric strain sensor reported here have great potential for use in flexible, comfortable, and wearable devices for health monitoring and motion detection.

scholarly journals Nano-Cracked Strain Sensor with High Sensitivity and Linearity by Controlling the Crack Arrangement

Sensors ◽  
2019 ◽  
Vol 19 (12) ◽  
pp. 2834 ◽  
Author(s):  
Hyunsuk Jung ◽  
Chan Park ◽  
Hyunwoo Lee ◽  
Seonguk Hong ◽  
Hyonguk Kim ◽  
...  
Keyword(s):  
Pulse Wave ◽  
Wearable Sensors ◽  
Strain Sensor ◽  
Strain Range ◽  
High Sensitivity ◽  
Strain Sensors ◽  
Gauge Factor ◽  
Micro Deformation ◽  
Sensing Performance ◽  
Limited Sensitivity

Studies on wearable sensors that monitor various movements by attaching them to a body have received considerable attention. Crack-based strain sensors are more sensitive than other sensors. Owing to their high sensitivity, these sensors have been investigated for measuring minute deformations occurring on the skin, such as pulse. However, existing studies have limited sensitivity at low strain range and nonlinearity that renders any calibration process complex and difficult. In this study, we propose a pre-strain and sensor-extending process to improve the sensitivity and linearity of the sensor. By using these pre-strain and sensor-extending processes, we were able to control the morphology and alignment of cracks and regulate the sensitivity and linearity of the sensor. Even if the sensor was fabricated in the same manner, the sensor that involved the pre-strain and extending processes had a sensitivity 100 times greater than normal sensors. Thus, our crack-based strain sensor had high sensitivity (gauge factor > 5000, gauge factor (GF = (△R/R0)/ε), linearity, and low hysteresis at low strain (<1% strain). Given its high sensing performance, the sensor can be used to measure micro-deformation, such as pulse wave and voice.

Three-Dimensional Graphene-Based Composite for Elastic Strain Sensor Applications

MRS Advances ◽  
2016 ◽  
Vol 1 (34) ◽  
pp. 2415-2420 ◽  
Author(s):  
Jinhui Li ◽  
Guoping Zhang ◽  
Rong Sun ◽  
C. P. Wong
Keyword(s):  
Flexible Electronics ◽  
Performance Monitoring ◽  
Three Dimensional ◽  
Strain Sensor ◽  
High Sensitivity ◽  
Human Motion ◽  
Strain Sensors ◽  
Sensor Applications ◽  
Human Motion Detection ◽  
Highly Stretchable

ABSTRACTFlexible electronics has emerged as a very promising field, in particular,wearable, bendable, and stretchable strain sensors with high sensitivity which could be used for human motion detection, sports performance monitoring, etc. In this paper, a highly stretchable and sensitive strain sensor composed of reduced graphene oxide foam and elastomer composite is fabricated by assembly and followed by a polymer immersing process. The strain sensor has demonstrated high stretchability and sensitivity. Furthermore, the device was employed for gauging muscle-induced strain which results in high sensitivity and reproducibility. The developed strain sensors showed great application potential in fields of biomechanical systems.

scholarly journals Research the Composite Strain Sensors for CNT/Polymer

2019 ◽  
Vol 8 (12S) ◽  
pp. 196-199
Keyword(s):  
Polymer Composite ◽  
Dynamic Range ◽  
Mass Density ◽  
Strain Sensor ◽  
Young Modulus ◽  
High Dynamic Range ◽  
Strain Sensors ◽  
Gauge Factor ◽  
Composite Strain ◽  
Property Changes

CNT means carbon nanotube possess piezoelectric due to that behavior its electrical property changes even with the strain applied on the CNT is at the nanoscale. Due to the advantages of composite strain sensor like their multidirectional sensing capability, high strain sensitivity, high dynamic range, flexibility, and low mass density they are turning out to be an ultimate replacement to conventional strain sensors in various applications. CNT film can also be incorporated into the polymer to form a CNT/polymer composite strain sensor. Some of the most famous polymers employed to fabricate CNT/polymer composite strain sensors are thermoplastic polymers polymethyl methacrylate, polystyrene, etc., thermosetting polymers like epoxy resins, polyurethanes, etc., and polydimethylsiloxane (PDMS). The small addition of CNTs to polymer significantly increases their electromechanical properties by enhancing its tensile strength & young modulus, which in turn improves their sensing performance. CNT/polymer composite strain sensor exhibits better strain transfer, gauge factor, linearity, repeatability, and cost than that of pure CNT strain sensor. There are different factors which are affecting the performance of CNT/polymer composite strain sensor including quality and quantity of CNT filler particles in composite, type of fabrication technique adopted to form a composite, alignment and agglomerates of CNT in composite, cracks or defect in composite and environmental conditions. This paper reviews the performance of various different types of CNT/polymer composite strain sensors.

scholarly journals A Sprayed Graphene Pattern-Based Flexible Strain Sensor with High Sensitivity and Fast Response

Sensors ◽  
2019 ◽  
Vol 19 (5) ◽  
pp. 1077 ◽  
Author(s):  
Wei Xu ◽  
Tingting Yang ◽  
Feng Qin ◽  
Dongdong Gong ◽  
Yijia Du ◽  
...  
Keyword(s):  
Strain Sensor ◽  
High Sensitivity ◽  
Fast Response ◽  
Strain Sensors ◽  
Biomedical Science ◽  
Gauge Factor ◽  
Experimental Conditions ◽  
Simple Method ◽  
Wide Range ◽  
Flexible Strain Sensor

Flexible strain sensors have a wide range of applications in biomedical science, aerospace industry, portable devices, precise manufacturing, etc. However, the manufacturing processes of most flexible strain sensors previously reported have usually required high manufacturing costs and harsh experimental conditions. Besides, research interests are often focused on improving a single attribute parameter while ignoring others. This work aims to propose a simple method of manufacturing flexible graphene-based strain sensors with high sensitivity and fast response. Firstly, oxygen plasma treats the substrate to improve the interfacial interaction between graphene and the substrate, thereby improving device performance. The graphene solution is then sprayed using a soft PET mask to define a pattern for making the sensitive layer. This flexible strain sensor exhibits high sensitivity (gauge factor ~100 at 1% strain), fast response (response time: 400–700 μs), good stability (1000 cycles), and low overshoot (<5%) as well. Those processes used are compatible with a variety of complexly curved substrates and is expected to broaden the application of flexible strain sensors.

scholarly journals Piezoresistive Multi-Walled Carbon Nanotube/Epoxy Strain Sensor with Pattern Design

Materials ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 3962 ◽  
Author(s):  
Mun-Young Hwang ◽  
Dae-Hyun Han ◽  
Lae-Hyong Kang
Keyword(s):  
Carbon Nanotube ◽  
Strain Gauge ◽  
Low Cost ◽  
Strain Sensor ◽  
High Sensitivity ◽  
Strain Sensors ◽  
Gauge Factor ◽  
Patch Type ◽  
Multi Walled Carbon Nanotube ◽  
Free Vibration Frequency

Carbon nanotube/polymer-based composites have led to studies that enable the realization of low-cost, high-sensitivity piezoresistive strain sensors. This study investigated the characteristics of piezoresistive multi-walled carbon nanotube (MWCNT)/epoxy composite strain sensors subjected to tensile and compressive loads in one direction at relatively small amounts of strain. A patterned sensor was designed to overcome the disadvantage of the load direction sensitivity differences in the existing sensors. The dispersion state of the MWCNTs in the epoxy polymer matrix with the proposed dispersion process was verified by scanning electron microscopy. An MWCNT/epoxy patterned strain sensor and a patch-type strain sensor were directly attached to an acrylic cantilever beam on the opposite side of a commercial metallic strain gauge. The proposed patterned sensor had gauge factors of 2.52 in the tension direction and 2.47 in the compression direction. The measured gauge factor difference for the patterned sensor was less than that for the conventional patch-type sensor. Moreover, the free-vibration frequency response characteristics were compared with those of metal strain gauges to verify the proposed patch-type sensor. The designed drive circuit compensated for the disadvantages due to the high drive voltage, and it was confirmed that the proposed sensor had higher sensitivity than the metallic strain gauge. In addition, the hysteresis of the temperature characteristics of the proposed sensor is presented to show its temperature range. It was verified that the patterned sensor developed through various studies could be applied as a strain sensor for structural health monitoring.

2D end-to-end carbon nanotube conductive networks in polymer nanocomposites: a conceptual design to dramatically enhance the sensitivities of strain sensors

Nanoscale ◽  
2018 ◽  
Vol 10 (5) ◽  
pp. 2191-2198 ◽  
Author(s):  
Jun-Hong Pu ◽  
Xiang-Jun Zha ◽  
Min Zhao ◽  
Shengyao Li ◽  
Rui-Ying Bao ◽  
...  
Keyword(s):  
Carbon Nanotube ◽  
Polymer Nanocomposites ◽  
Conceptual Design ◽  
Strain Sensor ◽  
Small Strain ◽  
Strain Sensors ◽  
Sensitive Strain ◽  
Gauge Factor ◽  
Highly Sensitive ◽  
End To End

A highly sensitive strain sensor with end-to-end CNT networks and showing a high gauge factor (248) at small strain (5%) is fabricated.

scholarly journals A Practical Strain Sensor Based on Ecoflex/Overlapping Graphene/Ecoflex Sandwich Structures for Vocal Fold Vibration and Body Motion Monitoring

2022 ◽  
Vol 2 ◽  
Author(s):  
Yanyan Fan ◽  
Hongbin Zhao ◽  
Yifan Yang ◽  
Yi Yang ◽  
Tianling Ren ◽  
...  
Keyword(s):  
Structural Design ◽  
Strain Sensor ◽  
Strain Range ◽  
High Sensitivity ◽  
Strain Sensors ◽  
Body Motion ◽  
Gauge Factor ◽  
Sensing Element ◽  
Structure Deformation ◽  
Vocal Fold Vibration

Graphene-based stretchable and flexible strain sensors are one of the promising “bridges” to the biomedical realm. However, enhancing graphene-based wearable strain sensors to meet the demand of high sensitivity, broad sensing range, and recoverable structure deformation simultaneously is still a great challenge. In this work, through structural design, we fabricated a simple Ecoflex/Overlapping Graphene/Ecoflex (EOGE) strain sensor by encapsulating a graphene sensing element on polymer Ecoflex substrates using a drop-casting method. The EOGE strain sensor can detect stretching with high sensitivity, a maximum gauge factor of 715 with a wide strain range up to 57%, and adequate reliability and stability over 1,000 cycles for stretching. Moreover, the EOGE strain sensor shows recoverable structure deformation, and the sensor has a steady response in the frequency disturbance test. The good property of the strain sensor is attributed to the resistance variation induced by the overlap and crack structure of graphene by structural design. The vibrations caused by sound and various body movements have been thoroughly detected, which exhibited that the EOGE strain sensor is a promising candidate for wearable biomedical electronic applications.

Sign in / Sign up

Export Citation Format

Share Document