scholarly journals A Practical Strain Sensor Based on Ecoflex/Overlapping Graphene/Ecoflex Sandwich Structures for Vocal Fold Vibration and Body Motion Monitoring

2022 ◽  
Vol 2 ◽  
Author(s):  
Yanyan Fan ◽  
Hongbin Zhao ◽  
Yifan Yang ◽  
Yi Yang ◽  
Tianling Ren ◽  
...  
Keyword(s):  
Structural Design ◽  
Strain Sensor ◽  
Strain Range ◽  
High Sensitivity ◽  
Strain Sensors ◽  
Body Motion ◽  
Gauge Factor ◽  
Sensing Element ◽  
Structure Deformation ◽  
Vocal Fold Vibration

Graphene-based stretchable and flexible strain sensors are one of the promising “bridges” to the biomedical realm. However, enhancing graphene-based wearable strain sensors to meet the demand of high sensitivity, broad sensing range, and recoverable structure deformation simultaneously is still a great challenge. In this work, through structural design, we fabricated a simple Ecoflex/Overlapping Graphene/Ecoflex (EOGE) strain sensor by encapsulating a graphene sensing element on polymer Ecoflex substrates using a drop-casting method. The EOGE strain sensor can detect stretching with high sensitivity, a maximum gauge factor of 715 with a wide strain range up to 57%, and adequate reliability and stability over 1,000 cycles for stretching. Moreover, the EOGE strain sensor shows recoverable structure deformation, and the sensor has a steady response in the frequency disturbance test. The good property of the strain sensor is attributed to the resistance variation induced by the overlap and crack structure of graphene by structural design. The vibrations caused by sound and various body movements have been thoroughly detected, which exhibited that the EOGE strain sensor is a promising candidate for wearable biomedical electronic applications.

scholarly journals High-Performance Wearable Strain Sensor Based on MXene@Cotton Fabric with Network Structure

2021 ◽  
Author(s):  
Lu Liu ◽  
Libo Wang ◽  
Xuqing Liu ◽  
Wenfeng Yuan ◽  
Mengmeng Yuan ◽  
...  
Keyword(s):  
Cotton Fabric ◽  
High Performance ◽  
Mechanical Performance ◽  
Active Material ◽  
Large Body ◽  
Strain Sensor ◽  
Strain Range ◽  
High Sensitivity ◽  
Strain Sensors ◽  
Gauge Factor

Abstract Although 2D nanomaterials such as MXene Ti3C2Tx have been used in flexible electronic devices for their unique properties such as high conductivity, excellent mechanical performance, flexibility, and good hydrophilicity, less research has focused on of MXene-based cotton fabric strain sensors. Moreover, fabrication of wearable strain sensors with a low cost, high sensitivity, good biocompatibility, and broad sensing range is still a challenge. In this work, a high-performance wearable strain sensor composed of 2D MXene d-Ti3C2Tx nanomaterials and cotton fabric is reported. As the active material in the sensor, MXene d-Ti3C2Tx exhibited an excellent conductivity and hydrophilicity and adhered well to the fabric fibers by electrostatic adsorption. Due to the unique structure of the fabric substrate and the properties of MXene sheets, the fabricated pressure sensor achieved a high sensitivity. The gauge factor of the MXene@cotton fabric strain sensor reached up to 4.11 within the strain range of 15 %. Meanwhile, the sensor possessed high durability (>500 cycles) and a low strain detection limit of 0.3%. Finally, the encapsulated strain sensor was used to detect subtle or large body movements and exhibited a rapid response. This study shows that the MXene@cotton fabric strain sensor reported here have great potential for use in flexible, comfortable, and wearable devices for health monitoring and motion detection.

scholarly journals Nano-Cracked Strain Sensor with High Sensitivity and Linearity by Controlling the Crack Arrangement

Sensors ◽  
2019 ◽  
Vol 19 (12) ◽  
pp. 2834 ◽  
Author(s):  
Hyunsuk Jung ◽  
Chan Park ◽  
Hyunwoo Lee ◽  
Seonguk Hong ◽  
Hyonguk Kim ◽  
...  
Keyword(s):  
Pulse Wave ◽  
Wearable Sensors ◽  
Strain Sensor ◽  
Strain Range ◽  
High Sensitivity ◽  
Strain Sensors ◽  
Gauge Factor ◽  
Micro Deformation ◽  
Sensing Performance ◽  
Limited Sensitivity

Studies on wearable sensors that monitor various movements by attaching them to a body have received considerable attention. Crack-based strain sensors are more sensitive than other sensors. Owing to their high sensitivity, these sensors have been investigated for measuring minute deformations occurring on the skin, such as pulse. However, existing studies have limited sensitivity at low strain range and nonlinearity that renders any calibration process complex and difficult. In this study, we propose a pre-strain and sensor-extending process to improve the sensitivity and linearity of the sensor. By using these pre-strain and sensor-extending processes, we were able to control the morphology and alignment of cracks and regulate the sensitivity and linearity of the sensor. Even if the sensor was fabricated in the same manner, the sensor that involved the pre-strain and extending processes had a sensitivity 100 times greater than normal sensors. Thus, our crack-based strain sensor had high sensitivity (gauge factor > 5000, gauge factor (GF = (△R/R0)/ε), linearity, and low hysteresis at low strain (<1% strain). Given its high sensing performance, the sensor can be used to measure micro-deformation, such as pulse wave and voice.

Highly sensitive and stretchable strain sensors based on chopped carbon fibers sandwiched between silicone rubber layers for human motion detections

2019 ◽  
Vol 54 (3) ◽  
pp. 423-434 ◽  
Author(s):  
MB Azizkhani ◽  
Sh Rastgordani ◽  
A. Pourkamali Anaraki ◽  
J Kadkhodapour ◽  
B Shirkavand Hadavand
Keyword(s):  
Carbon Fibers ◽  
Motion Detection ◽  
Silicone Rubber ◽  
Low Cost ◽  
High Sensitivity ◽  
Human Motion ◽  
Strain Sensors ◽  
Body Motion ◽  
Gauge Factor ◽  
Human Motion Detection

Tuning the electromechanical performance in piezoresistive composite strain sensors is primarily attained through appropriately employing the materials system and the fabrication process. High sensitivity along with flexibility in the strain sensing devices needs to be met according to the application (e.g. human motion detection, health and sports monitoring). In this paper, a highly stretchable and sensitive strain sensor with a low-cost fabrication is proposed which is acquired by embedding the chopped carbon fibers sandwiched in between silicone rubber layers. The electrical and mechanical features of the sensor were characterized through stretch/release loading tests where a considerably high sensitivity (the gauge factor about 100) was observed with very low hysteresis. This implies high strain reversibility (i.e. full recovery in each cycle) over 700 loading cycles. Moreover, the sensors exhibited ultra-high stretchability (up to ∼300% elongation) in addition to a low stiffness meaning minimal mechanical effects induced by the sensor for sensitive human motion monitoring applications including large and small deformations. The results suggest the promising capability of the present sensor in reflecting the human body motion detection.

scholarly journals Ultrasensitive Strain Sensor Based on Pre-Generated Crack Networks Using Ag Nanoparticles/Single-Walled Carbon Nanotube (SWCNT) Hybrid Fillers and a Polyester Woven Elastic Band

Sensors ◽  
2021 ◽  
Vol 21 (7) ◽  
pp. 2531
Author(s):  
Yelin Ko ◽  
Ji-seon Kim ◽  
Chi Cuong Vu ◽  
Jooyong Kim
Keyword(s):  
High Performance ◽  
Strain Sensor ◽  
Strain Range ◽  
Human Motion ◽  
Strain Sensors ◽  
Gauge Factor ◽  
Elastic Band ◽  
Practical Applications ◽  
Single Walled Carbon ◽  
Novel Strategy

Flexible strain sensors are receiving a great deal of interest owing to their prospective applications in monitoring various human activities. Among various efforts to enhance the sensitivity of strain sensors, pre-crack generation has been well explored for elastic polymers but rarely on textile substrates. Herein, a highly sensitive textile-based strain sensor was fabricated via a dip-coat-stretch approach: a polyester woven elastic band was dipped into ink containing single-walled carbon nanotubes coated with silver paste and pre-stretched to generate prebuilt cracks on the surface. Our sensor demonstrated outstanding sensitivity (a gauge factor of up to 3550 within a strain range of 1.5–5%), high stability and durability, and low hysteresis. The high performance of this sensor is attributable to the excellent elasticity and woven structure of the fabric substrate, effectively generating and propagating the prebuilt cracks. The strain sensor integrated into firefighting gloves detected detailed finger angles and cyclic finger motions, demonstrating its capability for subtle human motion monitoring. It is also noteworthy that this novel strategy is a very quick, straightforward, and scalable method of fabricating strain sensors, which is extremely beneficial for practical applications.

Ultra-stretchable and highly sensitive strain sensor based on gradient structure carbon nanotubes

Nanoscale ◽  
2018 ◽  
Vol 10 (28) ◽  
pp. 13599-13606 ◽  
Author(s):  
Binghao Liang ◽  
Zhiqiang Lin ◽  
Wenjun Chen ◽  
Zhongfu He ◽  
Jing Zhong ◽  
...  
Keyword(s):  
Carbon Nanotubes ◽  
Carbon Nanotube ◽  
Strain Sensor ◽  
High Sensitivity ◽  
Strain Sensors ◽  
Sensitive Strain ◽  
Gauge Factor ◽  
Gradient Structure ◽  
Highly Sensitive ◽  
Highly Stretchable

A highly stretchable and sensitive strain sensor based on a gradient carbon nanotube was developed. The strain sensors show an unprecedented combination of both high sensitivity (gauge factor = 13.5) and ultra-stretchability (>550%).

scholarly journals Highly Sensitive and Stretchable c-MWCNTs/PPy Embedded Multidirectional Strain Sensor Based on Double Elastic Fabric for Human Motion Detection

Nanomaterials ◽  
2021 ◽  
Vol 11 (9) ◽  
pp. 2333
Author(s):  
Huiying Shen ◽  
Huizhen Ke ◽  
Jingdong Feng ◽  
Chenyu Jiang ◽  
Qufu Wei ◽  
...  
Keyword(s):  
Degrees Of Freedom ◽  
Large Scale ◽  
Strain Sensor ◽  
High Sensitivity ◽  
Human Motion ◽  
Strain Sensors ◽  
Gauge Factor ◽  
Wearable Electronics ◽  
Synovial Joint ◽  
Human Motion Detection

Owing to the multi-dimensional complexity of human motions, traditional uniaxial strain sensors lack the accuracy in monitoring dynamic body motions working in different directions, thus multidirectional strain sensors with excellent electromechanical performance are urgently in need. Towards this goal, in this work, a stretchable biaxial strain sensor based on double elastic fabric (DEF) was developed by incorporating carboxylic multi-walled carbon nanotubes(c-MWCNTs) and polypyrrole (PPy) into fabric through simple, scalable soaking and adsorption-oxidizing methods. The fabricated DEF/c-MWCNTs/PPy strain sensor exhibited outstanding anisotropic strain sensing performance, including relatively high sensitivity with the maximum gauge factor (GF) of 5.2, good stretchability of over 80%, fast response time < 100 ms, favorable electromechanical stability, and durability for over 800 stretching–releasing cycles. Moreover, applications of DEF/c-MWCNTs/PPy strain sensor for wearable devices were also reported, which were used for detecting human subtle motions and dynamic large-scale motions. The unconventional applications of DEF/c-MWCNTs/PPy strain sensor were also demonstrated by monitoring complex multi-degrees-of-freedom synovial joint motions of human body, such as neck and shoulder movements, suggesting that such materials showed a great potential to be applied in wearable electronics and personal healthcare monitoring.

scholarly journals A Sprayed Graphene Pattern-Based Flexible Strain Sensor with High Sensitivity and Fast Response

Sensors ◽  
2019 ◽  
Vol 19 (5) ◽  
pp. 1077 ◽  
Author(s):  
Wei Xu ◽  
Tingting Yang ◽  
Feng Qin ◽  
Dongdong Gong ◽  
Yijia Du ◽  
...  
Keyword(s):  
Strain Sensor ◽  
High Sensitivity ◽  
Fast Response ◽  
Strain Sensors ◽  
Biomedical Science ◽  
Gauge Factor ◽  
Experimental Conditions ◽  
Simple Method ◽  
Wide Range ◽  
Flexible Strain Sensor

Flexible strain sensors have a wide range of applications in biomedical science, aerospace industry, portable devices, precise manufacturing, etc. However, the manufacturing processes of most flexible strain sensors previously reported have usually required high manufacturing costs and harsh experimental conditions. Besides, research interests are often focused on improving a single attribute parameter while ignoring others. This work aims to propose a simple method of manufacturing flexible graphene-based strain sensors with high sensitivity and fast response. Firstly, oxygen plasma treats the substrate to improve the interfacial interaction between graphene and the substrate, thereby improving device performance. The graphene solution is then sprayed using a soft PET mask to define a pattern for making the sensitive layer. This flexible strain sensor exhibits high sensitivity (gauge factor ~100 at 1% strain), fast response (response time: 400–700 μs), good stability (1000 cycles), and low overshoot (<5%) as well. Those processes used are compatible with a variety of complexly curved substrates and is expected to broaden the application of flexible strain sensors.

3D-Printed Stretchable Strain Sensor With Application to Wind Sensing

2018 ◽  
Author(s):  
Mohammed Al-Rubaiai ◽  
Ryohei Tsuruta ◽  
Umesh Gandhi ◽  
Chuan Wang ◽  
Xiaobo Tan
Keyword(s):  
Wind Speed ◽  
Large Strain ◽  
Thermoplastic Polyurethane ◽  
Strain Sensor ◽  
Strain Range ◽  
Strain Sensors ◽  
Plastic Substrate ◽  
Gauge Factor ◽  
Effective Manner ◽  
3D Printed

Stretchable strain sensors with large strain range, high sensitivity, and excellent reliability are of great interest for applications in soft robotics, wearable devices, and structure-monitoring systems. Unlike conventional template lithography-based approaches, 3D-printing can be used to fabricate complex devices in a simple and cost-effective manner. In this paper, we report 3D-printed stretchable strain sensors that embeds a flexible conductive composite material in a hyper-plastic substrate. Three commercially available conductive filaments are explored, among which the conductive thermoplastic polyurethane (ETPU) shows the highest sensitivity (gauge factor of 5), with a working strain range of 0%–20%. The ETPU strain sensor exhibits an interesting behavior where the conductivity increases with the strain. In addition, an experiment for measuring the wind speed is conducted inside a wind tunnel, where the ETPU sensor shows sensitivity to the wind speed beyond 5.6 m/s.

scholarly journals Piezoresistive Multi-Walled Carbon Nanotube/Epoxy Strain Sensor with Pattern Design

Materials ◽  
2019 ◽  
Vol 12 (23) ◽  
pp. 3962 ◽  
Author(s):  
Mun-Young Hwang ◽  
Dae-Hyun Han ◽  
Lae-Hyong Kang
Keyword(s):  
Carbon Nanotube ◽  
Strain Gauge ◽  
Low Cost ◽  
Strain Sensor ◽  
High Sensitivity ◽  
Strain Sensors ◽  
Gauge Factor ◽  
Patch Type ◽  
Multi Walled Carbon Nanotube ◽  
Free Vibration Frequency

Carbon nanotube/polymer-based composites have led to studies that enable the realization of low-cost, high-sensitivity piezoresistive strain sensors. This study investigated the characteristics of piezoresistive multi-walled carbon nanotube (MWCNT)/epoxy composite strain sensors subjected to tensile and compressive loads in one direction at relatively small amounts of strain. A patterned sensor was designed to overcome the disadvantage of the load direction sensitivity differences in the existing sensors. The dispersion state of the MWCNTs in the epoxy polymer matrix with the proposed dispersion process was verified by scanning electron microscopy. An MWCNT/epoxy patterned strain sensor and a patch-type strain sensor were directly attached to an acrylic cantilever beam on the opposite side of a commercial metallic strain gauge. The proposed patterned sensor had gauge factors of 2.52 in the tension direction and 2.47 in the compression direction. The measured gauge factor difference for the patterned sensor was less than that for the conventional patch-type sensor. Moreover, the free-vibration frequency response characteristics were compared with those of metal strain gauges to verify the proposed patch-type sensor. The designed drive circuit compensated for the disadvantages due to the high drive voltage, and it was confirmed that the proposed sensor had higher sensitivity than the metallic strain gauge. In addition, the hysteresis of the temperature characteristics of the proposed sensor is presented to show its temperature range. It was verified that the patterned sensor developed through various studies could be applied as a strain sensor for structural health monitoring.

Photolithography-assisted precise patterning of nanocracks for ultrasensitive strain sensors

2021 ◽  
Vol 9 (7) ◽  
pp. 4262-4272
Author(s):  
Junshan Liu ◽  
Hongji Guo ◽  
Ming Li ◽  
Chi Zhang ◽  
Yongzhi Chu ◽  
...  
Keyword(s):  
Strain Sensor ◽  
Strain Range ◽  
Metal Films ◽  
Strain Sensors ◽  
Gauge Factor

A photolithography-assisted nanocrack patterning method is reported to precisely define the nanocrack pattern in metal films. This method is used to fabricate an ultrasensitive strain sensor with a gauge factor of ∼20 000 in 0–1.2% strain range.

Sign in / Sign up

Export Citation Format

Share Document