Current status and development of external energy-assisted friction stir welding processes: a review

2022 ◽  
Author(s):  
Ranamay Saha ◽  
Pankaj Biswas
Keyword(s):  
Friction Stir Welding ◽  
Current Status ◽  
External Energy ◽  
Friction Stir ◽  
Welding Processes

A Friction Stir Welding Platform of Thin Plates

2012 ◽  
Vol 628 ◽  
pp. 206-210 ◽  
Author(s):  
Jia Liang Zhang ◽  
Bei Zhi Li ◽  
Xin Chao Zhang ◽  
Qing Xia Wang
Keyword(s):  
Friction Stir Welding ◽  
Virtual Instrument ◽  
Production Efficiency ◽  
Cost Effective ◽  
Field Analysis ◽  
Sensor Data ◽  
Thin Plates ◽  
Increase Production Efficiency ◽  
Friction Stir ◽  
Welding Processes

Friction stir welding processes involve many variables. Engineers and operators often find it difficult to effectively design or control it. The objective of this work is to develop a friction stir welding platform of thin plates to improve welding quality and to increase production efficiency. The study is conducted by using finite element modeling and temperature field analysis technology to obtain optimization parameters, and using virtual instrument, multi-sensor data fusion to monitor the force of the stirring spindle. Experiment results show that the developed platform can reach the requirements of processing quality and is cost-effective.

scholarly journals Design and Fabrication of Friction Stir Welding End-Effector for an ABB IRB1410 Robot

2016 ◽  
Vol 5 (2) ◽  
pp. 98
Author(s):  
Santosh Vanama
Keyword(s):  
Friction Stir Welding ◽  
High Strength ◽  
Fusion Welding ◽  
Fusion Temperature ◽  
End Effector ◽  
Friction Stir ◽  
Aluminum Sheets ◽  
Operation Pressure ◽  
Welding Processes ◽  
Tool Rotation

<p>The paper propose modelling and fabrication of friction stir welding end-effector for ABB IRB1410 robot. A dynamically developing version of pressure welding processes, join material without reaching the fusion temperature called friction stir welding. As friction stir welding occurs in solid state, no solidification structures are created thereby eliminating the brittle and eutectic phase’s common to fusion welding of high strength aluminium alloys. In this paper, Friction stir welding is applied to aluminum sheets of 2 mm thickness. A prototype setup is developed to monitor the evolution of main forces and tool temperature during the operation. Pressure of a gripper plays a major role for tool rotation and developing torque.  Fabrication of the tool has done. Force calculations are done by placing the sensors on the outer surface of gripper. Methods of evaluating weld quality are surveyed as well.</p>

Multiaxial Mechanical Strength of AA-2024-T3 Aluminium Alloy Sheets Joined by Friction Stir Welding Processes

2009 ◽  
Vol 83-86 ◽  
pp. 1243-1250 ◽  
Author(s):  
R.L.L.P. Cerveira ◽  
G. F. Batalha
Keyword(s):  
Friction Stir Welding ◽  
Base Material ◽  
Short Review ◽  
Multiaxial Loading ◽  
Angle Variation ◽  
Friction Stir ◽  
Aa 2024 ◽  
Aeronautical Industry ◽  
Welding Processes ◽  
Joining Process

The aim is to analyze a junction produced by a Friction Stir Welding (FSW) joining process under multiaxial loading, employing a modified Arcan test that allows an angle variation of the loading in order to evaluate the failure of the FSW weldment as compared to the base material. A short review of the earlier studies and relevant theories about the FSW processes and fracture modes I and II under multiaxial loading are presented and were experimentally evaluated for an AA2024-T3 aluminum alloy sheets (t = 1.6 mm) processed by FSW. The results obtained can serve as a basis to compare the junctions made using FSW and conventional joint methods such as rivets (very common practice in the aeronautical industry).

Study on Forming Behaviour of Friction Stir Welded Blanks During Single Point Incremental Forming (SPIF) Process

2020 ◽  
Author(s):  
Shalin Marathe ◽  
Harit Raval
Keyword(s):  
Friction Stir Welding ◽  
Incremental Forming ◽  
Single Point ◽  
Base Material ◽  
Forming Limit ◽  
Single Point Incremental Forming ◽  
Cnc Milling ◽  
Forming Process ◽  
Friction Stir ◽  
Welding Processes

Abstract The automobile, transportation and shipbuilding industries are aiming at fuel efficient products. In order to enhance the fuel efficiency, the overall weight of the product should be brought down. This requirement has increased the use of material like aluminium and its alloys. But, it is difficult to weld aluminium using conventional welding processes. This problem can be solved by inventions like friction stir welding (FSW) process. During fabrication of product, FSW joints are subjected to many different processes and forming is one of them. During conventional forming, the formability of the welded blanks is found to be lower than the formability of the parent blank involved in it. One of the major reasons for reduction in formability is the global deformation provided on the blank during forming process. In order to improve the formability of homogeneous blanks, Single Point Incremental Forming (SPIF) is found to be giving excellent results. So, in this work formability of the welded blanks is investigated during the SPIF process. Friction Stir Welding is used to fabricate the welded blanks using AA 6061 T6 as base material. Welded blanks are formed in to truncated cone through SPIF process. CNC milling machine is used as SPIF machine tool to perform the experimental work. In order to avoid direct contact between weld seam and forming tool, a dummy sheet was used between them. As responses forming limit curve (FLC), surface roughness, and thinning are investigated. It was found that use of dummy sheet leads to improve the surface finish of the formed blank. The formability of the blank was found less in comparison to the parent metal involved in it. Uneven distribution of mechanical properties in the welded blanks leads to decrease the formability of the welded blanks.

Establishing the Dependence of Output Parameters Depending on Local Process Conditions for Friction Stir Welding of Pure Copper Plates

2018 ◽  
Vol 1146 ◽  
pp. 32-37 ◽  
Author(s):  
Marius Adrian Constantin ◽  
Ana Boşneag ◽  
Eduard Niţu ◽  
Lia Nicoleta Boţilă
Keyword(s):  
Friction Stir Welding ◽  
Process Parameters ◽  
Welding Speed ◽  
Frictional Heating ◽  
Pure Copper ◽  
Fusion Welding ◽  
Process Conditions ◽  
Friction Stir ◽  
Local Process ◽  
Welding Processes

Welding copper and its alloys is usually difficult to achieve by conventional fusion welding processes because of high thermal diffusivity of the copper, which is at least 10 times higher than most steel alloys, in addition to this, there are the well-known disadvantages of conventional fusion welding represented by necessity of using alloying elements, a shielding gas and a clean surface. To overcome these inconveniences, Friction Stir Welding (FSW), a solid state joining process that relies on frictional heating and plastic deformation, is being explored as a feasible welding process. In order to achieve an increased welding speed and a reduction in tool wear, this process is assisted by another one (TIG) which generates and adds heat to the process. The research includes two experiments for the FSW process and one experiment for tungsten inert gas assisted FSW process. The process parameters that varied were the rotational speed of the tool [rpm] and the welding speed [mm/min] while the compressive force remained constant. The purpose of this paper is to correlate the evolution of temperature, tensile strength, elongation and microscopic aspect with the linear position on the joint (local process parameters) for each experimental case and then make comparisons between them, and to identify and present the set of process parameters that has the best mechanical properties for this material.

Friction Stir Welding of the Aluminum Matrix Composite - A Literature Review

2015 ◽  
Vol 787 ◽  
pp. 669-673
Author(s):  
K. Reddi Prasad ◽  
Arumugam Mahamani
Keyword(s):  
Friction Stir Welding ◽  
Literature Review ◽  
Weight Ratio ◽  
Ex Situ ◽  
Aluminium Matrix ◽  
Matrix Composites ◽  
Aluminium Matrix Composites ◽  
Friction Stir ◽  
Joint Efficiency ◽  
Welding Processes

Aluminium matrix composites have received the attention of numerous researchers, because of its attractive properties like high strength, good thermal conductivity and more strength to weight ratio. Application of the conventional welding processes for aluminium matrix composites, facilitates the formation of undesirable phase at the welded region, which limits the wide spread application. The objective of this paper is to review the literatures belonging to the friction stir welding of the composites and explore the challenges associated to maximize joint efficiency. The major contribution of this paper is to study the issue of welding of ex-situ and in-situ composites, various process parameters, properties of joint and post weld heat treatment process to improve the joint efficiency. This literature review provides some research gaps in the friction stir welding of composites.

Solid-State Welding: Friction and Friction Stir Welding Processes

2020 ◽  
Author(s):  
Esther Titilayo Akinlabi ◽  
Rasheedat Modupe Mahamood
Keyword(s):  
Friction Stir Welding ◽  
Solid State ◽  
Friction Stir ◽  
Welding Processes

Evaluation of dissimilar joints properties of 5083-H12 and 6061-T6 aluminum alloys produced by tungsten inert gas and friction stir welding

2015 ◽  
Vol 231 (3) ◽  
pp. 297-308 ◽  
Author(s):  
Morteza Ghaffarpour ◽  
Mohammad Kazemi ◽  
Mohammad Javad Mohammadi Sefat ◽  
Ahmad Aziz ◽  
Kamran Dehghani
Keyword(s):  
Mechanical Properties ◽  
Friction Stir Welding ◽  
Aluminum Alloys ◽  
Traverse Speed ◽  
Inert Gas ◽  
Dissimilar Joints ◽  
Friction Stir ◽  
Dissimilar Aluminum Alloys ◽  
The Difference ◽  
Welding Processes

In the present study, friction stir welding (FSW) and tungsten inert gas (TIG) techniques were used to join the dissimilar aluminum alloys of 5083-H12 and 6061-T6. The laboratory tests were designed using design of experiment (DOE) method. Variables for the FSW process were the rotational speed, traverse speed, shoulder diameter, and pin diameter. They changed in ranges of 700–2500 r/min, 25–400 mm/min, 10–14 mm, and 2–4 mm, respectively. In the case of TIG process, the variables were current intensity, traverse speed, and tilt angle. These parameters varied from 80 to 90 A, 200 to 400 mm/min, and 3° to 12°, respectively. The optimum amounts of parameters were obtained using response surface methodology (RSM). The RSM-based model was developed to predict ultimate tensile strength (UTS) of the welds produced. In FSW, the difference between predicted and measured UTS was about 1.28% and in TIG it was 1.78%. The good agreement between experimental and predicted results indicates the high accuracy of the developed model. Mechanical properties and also the microstructure of the welds were compared after optimizing both welding processes using RSM. The results showed that the welds produced by FSW indicated a considerably higher quality and also improved mechanical properties compared to TIG. Properties of the joints obtained by FSW in single-sided joints were more desirable. In the double-sided welds obtained by FSW these differences were of an even higher significance.

Friction-based welding processes: friction welding and friction stir welding

2020 ◽  
Vol 34 (24) ◽  
pp. 2613-2637 ◽  
Author(s):  
Dipen Kumar Rajak ◽  
Durgesh D. Pagar ◽  
Pradeep L. Menezes ◽  
Arameh Eyvazian
Keyword(s):  
Friction Stir Welding ◽  
Friction Welding ◽  
Friction Stir ◽  
Welding Processes
Sign in / Sign up

Export Citation Format

Share Document