Ultrasonic coupling with electrical current to effective activation of Persulfate for 2, 4 Dichlorophenoxyacetic acid herbicide degradation: modeling, synergistic effect, and a by-product study

Author(s):  
Jamal Mehralipour ◽  
Majid Kermani
2019 ◽  
Vol 103 (13) ◽  
pp. 5065-5078 ◽  
Author(s):  
Maria Pilar Serbent ◽  
Andrey Martinez Rebelo ◽  
Adilson Pinheiro ◽  
Adriana Giongo ◽  
Lorena Benathar Ballod Tavares

2019 ◽  
Vol 9 (18) ◽  
pp. 5130-5141 ◽  
Author(s):  
Shuang Song ◽  
Qiuxiang Liu ◽  
Jinhui Fang ◽  
Weiting Yu

Enhanced dechlorination efficiency is achieved through a synergistic effect: H* formation on Ni(OH)2 and dechlorination steps on Pd.


1995 ◽  
Vol 75 (3) ◽  
pp. 379-383 ◽  
Author(s):  
James A. Entry ◽  
William H. Emmingham

The influence of manure application to pasture soils on bacterial and fungal biomass and the atrazine (2 chloro-4 [ethylamino]-6[isopropylamino]-s-triazine) and 2,4-D (2,4 dichlorophenoxyacetic acid) mineralization was assessed in microcosms using radiometric techniques. Additions of 5 tonnes manure ha−1 yr−1 were made to three pasture soils over 20 yr in western Oregon at a rate of 0.42 t ha−1 each month. No manure or fertilizer was added to control treatments. We found greater amounts of total fungal and bacterial biomass in soils that received added manure. There were no differences among active bacterial and fungal biomass between pasture soils that received manure application and pasture soils that received no manure. Greater amounts of atrazine and 2,4-D were mineralized when manure was applied than when soil received no manure or fertilizer. Greater amounts of atrazine and 2,4-D were mineralized in the spring than in summer, fall or winter. Results of this study indicate that the application of dairy manure to pasture soils will significantly increase herbicide degradation rates. Key words: Pasture soils, microbial biomass, manure application, atrazine, 2,4-D, herbicide mineralization


2019 ◽  
Vol 116 (27) ◽  
pp. 13299-13304 ◽  
Author(s):  
Jonathan R. Chekan ◽  
Chayanid Ongpipattanakul ◽  
Terry R. Wright ◽  
Bo Zhang ◽  
J. Martin Bollinger ◽  
...  

The synthetic auxin 2,4-dichlorophenoxyacetic acid (2,4-D) is an active ingredient of thousands of commercial herbicides. Multiple species of bacteria degrade 2,4-D via a pathway initiated by the Fe(II) and α-ketoglutarate (Fe/αKG)-dependent aryloxyalkanoate dioxygenases (AADs). Recently, genes encoding 2 AADs have been deployed commercially in herbicide-tolerant crops. Some AADs can also inactivate chiral phenoxypropionate and aryloxyphenoxypropionate (AOPP) herbicides, albeit with varying substrate enantioselectivities. Certain AAD enzymes, such as AAD-1, have expanded utility in weed control systems by enabling the use of diverse modes of action with a single trait. Here, we report 1) the use of a genomic context-based approach to identify 59 additional members of the AAD class, 2) the biochemical characterization of AAD-2 fromBradyrhizobium diazoefficiensUSDA 110 as a catalyst to degrade (S)-stereoisomers of chiral synthetic auxins and AOPP herbicides, 3) spectroscopic data that demonstrate the canonical ferryl complex in the AAD-1 reaction, and 4) crystal structures of representatives of the AAD class. Structures of AAD-1, an (R)-enantiomer substrate-specific enzyme, in complexes with a phenoxypropionate synthetic auxin or with AOPP herbicides and of AAD-2, which has the opposite (S)-enantiomeric substrate specificity, reveal the structural basis for stereoselectivity and provide insights into a common catalytic mechanism.


1990 ◽  
Vol 29 (04) ◽  
pp. 282-288 ◽  
Author(s):  
A. van Oosterom

AbstractThis paper introduces some levels at which the computer has been incorporated in the research into the basis of electrocardiography. The emphasis lies on the modeling of the heart as an electrical current generator and of the properties of the body as a volume conductor, both playing a major role in the shaping of the electrocardiographic waveforms recorded at the body surface. It is claimed that the Forward-Problem of electrocardiography is no longer a problem. Several source models of cardiac electrical activity are considered, one of which can be directly interpreted in terms of the underlying electrophysiology (the depolarization sequence of the ventricles). The importance of using tailored rather than textbook geometry in inverse procedures is stressed.


2020 ◽  
Vol 25 (3) ◽  
pp. 415-423
Author(s):  
Ahmed Lachhab ◽  
El Mehdi Benyassine ◽  
Mohamed Rouai ◽  
Abdelilah Dekayir ◽  
Jean C. Parisot ◽  
...  

The tailings of Zeida's abandoned mine are found near the city of Midelt, in the middle of the high Moulouya watershed between the Middle and the High Atlas of Morocco. The tailings occupy an area of about 100 ha and are stored either in large mining pit lakes with clay-marl substratum or directly on a heavily fractured granite bedrock. The high contents of lead and arsenic in these tailings have transformed them into sources of pollution that disperse by wind, runoff, and seepage to the aquifer through faults and fractures. In this work, the main goal is to identify the pathways of contaminated water with heavy metals and arsenic to the local aquifers, water ponds, and Moulouya River. For this reason, geophysical surveys including electrical resistivity tomography (ERT), seismic refraction tomography (SRT) and very low-frequency electromagnetic (VLF-EM) methods were carried out over the tailings, and directly on the substratum outside the tailings. The result obtained from combining these methods has shown that pollutants were funneled through fractures, faults, and subsurface paleochannels and contaminated the hydrological system connecting groundwater, ponds, and the river. The ERT profiles have successfully shown the location of fractures, some of which extend throughout the upper formation to depths reaching the granite. The ERT was not successful in identifying fractures directly beneath the tailings due to their low resistivity which inhibits electrical current from propagating deeper. The seismic refraction surveys have provided valuable details on the local geology, and clearly identified the thickness of the tailings and explicitly marked the boundary between the Triassic formation and the granite. It also aided in the identification of paleochannels. The tailings materials were easily identified by both their low resistivity and low P-wave velocity values. Also, both resistivity and seismic velocity values rapidly increased beneath the tailings due to the compaction of the material and lack of moisture and have proven to be effective in identifying the upper limit of the granite. Faults were found to lie along the bottom of paleochannels, which suggest that the locations of these channels were caused by these same faults. The VLF-EM surveys have shown tilt angle anomalies over fractured areas which were also evinced by low resistivity area in ERT profiles. Finally, this study showed that the three geophysical methods were complementary and in good agreement in revealing the pathways of contamination from the tailings to the local aquifer, nearby ponds and Moulouya River.


The authors' methodic for assessing the role of chemical and physic-chemical factors during the structure formation of gypsum stone is presented in the article. The methodic is also makes it possible to reveal the synergistic effect and to determine the ranges of variation of controls factors that ensure maximum values of such effect. The effect of a micro-sized modifier based on zinc hydro-silicates on the structure formation of building gypsum is analyzed and corresponding dependencies are found. It is shown that effects of influence of modifier on the properties of gypsum compositions are determined by chemical properties of modifier. Among the mentioned properties are sorption characteristics (which depend on the amount of silicic acid and its state) and physicochemical properties - the ability to act as a substrate during crystal formation. The proposed method can also be extended to other binding substances and materials. This article contributes to the understanding of the processes that occur during the structure formation of composites, which will make it possible to control the structure formation in the future, obtaining materials with a given set of properties.


Sign in / Sign up

Export Citation Format

Share Document