Sensitivity analysis on an irreversible exothermic reaction a catalyst slab

1971 ◽  
Vol 26 (9) ◽  
pp. 1481-1484 ◽  
Author(s):  
J.E. Bailey
Keyword(s):  
Sensitivity Analysis ◽  
Exothermic Reaction

Core Scale FEM Modeling of Thermochemical Fracturing on Cement Cube Samples

2021 ◽  
Author(s):  
Zeeshan Tariq ◽  
Ayman AlNakhli ◽  
Abdulazeez Abdulraheem ◽  
Mohamed Mahmoud
Keyword(s):  
Sensitivity Analysis ◽  
Global Economy ◽  
Oil And Gas ◽  
Peak Pressure ◽  
Exothermic Reaction ◽  
Cohesive Zone Modeling ◽  
Fem Modeling ◽  
Breakdown Pressure ◽  
Multiple Fractures ◽  
Micro Cracks

Abstract Brownfields and depleting conventional resources of fossil fuel energy are not enough to fulfill the tremendously increasing energy demands around the globe. Unconventional oil and gas resources are creating a huge impact on the enhancement of the global economy. Tight rocks are usually located in deep and high-strength formations. In this study, numerical simulation results on a new thermochemical fracturing approach is presented. The new fracturing approach was implemented to reduce the breakdown pressure of the unconventional tight formations. The hydraulic fracturing experiments presented in this study were carried out on ultra-tight cement block samples. The permeability of the block samples was less than 0.005mD. Thermochemical fracturing was carried out by a thermochemical fluids that caused a rapid exothermic reaction which resulted in the instantaneous generation of heat and pressure. Different salts of nitrogen such as sodium nitrite and ammonium chloride were used as a thermochemical fluid. The instantaneous generation of the heat and pressure caused the creation of micro-cracks. The fracturing results revealed that the novel thermochemical fracturing was able to reduce the breakdown pressure in ultra-tight cement from 1095 psi to 705 psi. The reference breakdown pressure was recorded from the conventional fracturing technique. A finite element (FEM) analysis was conducted using commercial software ABAQUS. In FEM, two approaches were used to model the thermochemical fractures namely, cohesive zone modeling (CZM) and concrete damage plasticity models (CDP). The sensitivity analysis of peak pressure and time to reach the peak pressure is also presented in this study. The sensitivity analysis can help in better designing thermochemical fluids that could lead to the maximum generation of micro-cracks and multiple fractures.

Use of sensitivity analysis to describe an endothermic/exothermic reaction system

AIChE Journal ◽  
1992 ◽  
Vol 38 (3) ◽  
pp. 461-465 ◽  
Author(s):  
D. R. van der Vaart ◽  
H. R. van der Vaart
Keyword(s):  
Sensitivity Analysis ◽  
Exothermic Reaction ◽  
Reaction System

Nuclear Reactions in Deuterium Titanium

1990 ◽  
Vol 48 (2) ◽  
pp. 134-135
Author(s):  
D.M. Vanderwalker
Keyword(s):  
Nuclear Reactions ◽  
Ion Beam ◽  
Exothermic Reaction ◽  
Pure Titanium ◽  
Fundamental Interest ◽  
Transmission Electron ◽  
Iodide Titanium ◽  
A Cell ◽  
After Hours ◽  
Quantity Of Heat

There is a fundamental interest in electrochemical fusion of deuterium in palladium and titanium since its supposed discovery by Fleischmann and Pons. Their calorimetric experiments reveal that a large quantity of heat is released by Pd after hours in a cell, suggesting fusion occurs. They cannot explain fusion by force arguments, nor can it be an exothermic reaction on the formation of deuterides because a smaller quantity of heat is released. This study examines reactions of deuterium in titanium.Both iodide titanium and 99% pure titanium samples were encapsulated in vacuum tubes, annealed for 2h at 800 °C. The Ti foils were charged with deuterium in a D2SO4 D2O solution at a potential of .45V with respect to a calomel reference junction. Samples were ion beam thinned for transmission electron microscopy. The TEM was performed on the JEOL 200CX.The structure of D charged titanium is α-Ti with hexagonal and fee deuterides.

Aplikasi Metode Hungarian Dalam Optimalisasi Waktu Penugasan Karyawan dan Keuntungan Produksi Home Industry

2019 ◽  
Vol 2 (2) ◽  
Author(s):  
Empya Charlie ◽  
Siti Rusdiana ◽  
Rini Oktavia
Keyword(s):  
Sensitivity Analysis ◽  
Optimal Solution ◽  
Optimal Scheduling ◽  
Total Work ◽  
Work Time ◽  
Hungarian Method ◽  
Total Work Time

Penelitian ini bertujuan untuk mengoptimalkan penjadwalan karyawan di CV. Karya Indah Bordir dalam melakukan tugas-tugas tertentu menggunakan metode Hungaria, serta menganalisis sensitivitas solusi optimal jika ada pengurangan waktu karyawan untuk menyelesaikan tugas-tugas. Metode Hongaria diterapkan pada proses bordir yang melibatkan 11 karyawan dan 10 tugas. Hasil penjadwalan yang optimal meminimalkan waktu produksi bordir perusahaan. Hasil penjadwalan optimal yang ditemukan adalah: karyawan 1 mengerjakan tas Mambo, karyawan 2 mengerjakan tas Elli, karyawan 3 mengerjakan tas Lonjong, karyawan 4 mengerjakan tas Tampang bunga, karyawan 6 mengerjakan tas Ransel, karyawan 7 mengerjakan tas Tima, karyawan 8 mengerjakan tas Keong, karyawan 9 mengerjakan tas Alexa, karyawan 10 mengerjakan tas Luna, dan karyawan 11 mengerjakan tas Mikha, dengan total waktu kerja adalah 13,7 jam. Setelah metode Hongaria diterapkan, CV. Karya Indah Bordir mendapat peningkatan pendapatan sebanyak 9,09%. Analisis sensitivitas dilakukan dengan mengurangi waktu karyawan dalam menyulam tas. Hasil analisis sensitivitas adalah beberapa batasan untuk variabel basis dan non basis untuk mempertahankan solusi optimal.   This research has a purpose to optimize the scheduling of employees in CV. Karya Indah Bordir in doing certain tasks using Hungarian method, as well as analyzing the sensitivity of the optimal solution if there is a reduction on the employees time to finish the tasks. The Hungarian method was applied on the embroidery process involving 11 employees and 10 tasks. The optimal scheduling result minimize the time of the embroidery production of the company. The optimal scheduling result found is: employee 1 does the Mambo bag, employee 2 does the Elli bag, employee 3 does the Lonjong bag, employee 4 does the Tampang bunga bag, employee 6 does the Ransel, employee 7 does the Tima bag, employee 8 does the Keong bag, employee 9 does the Alexa bag, employees 10 does the Luna bag, and employee 11 does the Mikha bag, with the total work time is 13,7 hours. After the Hungarian method was applied, CV. Karya Indah Bordir got the increasing revenue as much as 9,09 %. The sensitivity analysis was conducted by reducing the time of the employees take in embroidery the bags. The results of the sensitivity analysis are some boundaries for basis and non basis variables to maintain the optimal solution. 

Sign in / Sign up

Export Citation Format

Share Document