Kinetics of the low temperature thermal decomposition of ammonium perchlorate and its catalysis by copper ion

1972 ◽  
Vol 4 (3) ◽  
pp. 362-369 ◽  
Author(s):  
A.G. Keenan ◽  
Robert F. Siegmund

We identify nitryl perchlorate as the essential intermediate in the low temperature thermal decomposition of ammonium perchlorate AP. Evidence supporting this identification includes the analytical detection of an oxidized nitrogenous species in partly reacted AP and the ability of ammonium nitrate and several other nitrates to markedly reduce the induction period to decomposition of AP and to accelerate the subsequent reaction. It is also shown that the measured rate of the reaction of pure AP is in very satisfactory agreement with that estimated to result from this amount of NO 2 ClO 4 present. This mechanism differs from those currently accepted, in which the controlling process is believed to involve the transfer of either a proton or an electron. Our proposal is based on the known instability of NO 2 ClO 4 at reaction temperature ( ca . 500 K), the enhanced reactivity compared to the ionic alkali perchlorates being ascribed to covalent bond formation O 2 NO─ClO 3 . Subsequent reactions of the products of breakdown of this species, NO + , ClO 3 - and 2O or O 2 , are regarded as capable of oxidizing reactant NH 4 + (→NO 2 + ), thus regenerating the intermediate. Localized reaction in migrating ‘particles’ of fluid NO 2 ClO 4 , advancing through the reactant and leaving a residue of porous NH 4 ClO 4 , explains the unusual, incomplete low temperature decomposition that is characteristic of AP. The article reports comparative kinetic data for the decomposition of pure AP and the reaction initiated by various added nitrates. Rate studies are complemented by scanning electron microscope examinations of the geometry of interface development and the structure of the decomposed salt. From these and analytical results the role of nitryl perchlorate in AP decomposition is discussed.


1990 ◽  
Vol 204 ◽  
Author(s):  
V. M. Donnelly ◽  
J. A. Mccaulley ◽  
R. J. Shul

ABSTRACTWe report studies of the kinetics of thermal decomposition of triethylgallium (TEGa), trimethylgallium (TMGa), and trimethylindium (TMIn) adsorbed on GaAs(100) in ultrahigh vacuum. The adsorbed layers were prepared by dosing GaAs(100) at room temperature, to either saturated coverage or coverages below saturation. Subsequent heating leads to loss of adsorbed hydrocarbons. The relative coverage of carbon was monitored by X-ray photoelectron spectroscopy (XPS), and products were detected with a differentially pumped quadrupole mass spectrometer. The kinetic analysis also includes measurements of laser-induced, rapid thermal decomposition (heating rates of ∼1011°C/s).TEGa dissociatively chemisorbs on GaAs(100). Heating the substrate results in desorption of diethylgallium radicals at low temperature and C2H4 (and some C2H5) at higher temperatures, after most of the diethylgallium has desorbed. TMGa decomposes to yield a Ga-alkyl desorption product (either dimethylgallium, or a mixture of dimethylgallium and TMGa) at low temperature and CH3 at higher temperature. TMIn undergoes a methyl exchange reaction on GaAs(100) where a Ga-alkyl desorbs with the same cracking pattern as in TMGa decomposition. Decomposition mechanisms for these group-III metal alkyls are proposed, Arrhenius parameters are presented, and some implications are discussed for growth of Ga-containing III-V compound semiconductor films from these precursors by chemical vapor deposition and molecular beam techniques.


2021 ◽  
Vol 11 (20) ◽  
pp. 9392
Author(s):  
Haijun Zhang ◽  
Jianxin Nie ◽  
Gangling Jiao ◽  
Xing Xu ◽  
Shi Yan ◽  
...  

Ammonium perchlorate (AP) is a common oxidant in solid propellants, and its thermal decomposition characteristics at low temperatures (less than 240 °C) are key to the study of the thermal safety of propellants. Here, the low-temperature thermal decomposition characteristics of AP were investigated at 230 °C. The micromorphology of the low-temperature decomposition residues was characterized by scanning electron microscopy and 3D nano-computed tomography in order to analyse the evolution of microscopic pore structures, and the effect of the AP pore structure on combustion performance was then tested and analysed with a homemade closed bomb. The results demonstrate that the low-temperature decomposition of AP first occurs near the surface of the particles, simultaneously starting at multiple points and forming pores, and then gradually expands towards the interior until almost all of the pores connect with one other. Compared with ordinary AP, porous AP has a significantly improved combustion rate. When the ratio of porous AP to Al was 80:20, the peak pressure in the closed bomb was increased by 2.7 times; the rate of change in peak pressure increased 34 times, leading to a higher reaction speed and higher reaction intensity, and a typical explosion reaction occurred.


1971 ◽  
Vol 4 (3) ◽  
pp. 169-175
Author(s):  
G. B. Manelis ◽  
A. V. Proshchin ◽  
Yu. I. Rubtsov ◽  
V. A. Strunin ◽  
A. S. Shteinberg

Sign in / Sign up

Export Citation Format

Share Document