Emission of short free electron laser pulse by high charge electron bunches

1996 ◽  
Vol 123 (1-3) ◽  
pp. 143-147
Author(s):  
K.H. Tsui
2006 ◽  
Vol 34 (5) ◽  
pp. 369-373 ◽  
Author(s):  
Taizou KANAI ◽  
Sachiko SUZUKI ◽  
Sachiko YOSHIHASHI ◽  
Katsunori ISHII ◽  
Kunio AWAZU

1994 ◽  
Vol 64 (13) ◽  
pp. 1601-1603 ◽  
Author(s):  
Makoto Asakawa ◽  
Naoki Sakamoto ◽  
Naoki Inoue ◽  
Tatsuya Yamamoto ◽  
Kunioki Mima ◽  
...  

2018 ◽  
Vol 51 (3) ◽  
pp. 035602 ◽  
Author(s):  
Yu-Ping Sun ◽  
Quan Miao ◽  
Ai-Ping Zhou ◽  
Rui-Jin Liu ◽  
Bo Liu ◽  
...  

2013 ◽  
Vol 20 (4) ◽  
pp. 550-554 ◽  
Author(s):  
Jaromir Hrdý ◽  
Peter Oberta

It is shown theoretically that the asymmetric or inclined double-crystal X-ray monochromator may be used for X-ray pulse compression if the pulse is properly chirped. By adjusting the mutual distance of the two asymmetric or inclined crystals it should be possible to achieve even a sub-femtosecond compression of a chirped free-electron laser pulse. The smalld-spacing of the crystal enables a more compact scheme compared with the currently used grating compression scheme. The asymmetric cut of the crystal enables the acceptance of a larger bandwidth. The inclined cut has larger tunability.


2010 ◽  
Vol 1 (MEDSI-6) ◽  
Author(s):  
B. Brajuskovic ◽  
R. Lindberg ◽  
N. Sereno

The Advanced Photon Source at Argonne National Laboratory is developing a low-emittance thermionic gun for a proposed X-ray free-electron laser oscillator (XFEL-O) that will use a laser pulse-heated cathode. The cathode must operate at or slightly above 1500 °C for several nanoseconds and then cool down several hundred °C in approximately the same amount of time, with a 1-MHz heating–cooling cycle. A transient thermal analysis was performed to optimize the laser pulse shape needed to provide the desired temperature response of the cathode for several possible cathode materials. In addition, thermal stresses developed in the cathode during heating–cooling cycles were analysed. Both transient thermal analysis and thermal stress computations were performed using the ANSYS12 code. The computed temperature distribution and thermal stresses were utilized in the optimization of the cathode design. The results of the analysis are presented.


Author(s):  
H. Tomizawa ◽  
T. Sato ◽  
K. Ogawa ◽  
K. Togawa ◽  
T. Tanaka ◽  
...  

A fully coherent free electron laser (FEL) seeded with a higher-order harmonic (HH) pulse from high-order harmonic generation (HHG) is successfully operated for a sufficiently prolonged time in pilot user experiments by using a timing drift feedback. For HHG-seeded FELs, the seeding laser pulses have to be synchronized with electron bunches. Despite seeded FELs being non-chaotic light sources in principle, external laser-seeded FELs are often unstable in practice because of a timing jitter and a drift between the seeding laser pulses and the accelerated electron bunches. Accordingly, we constructed a relative arrival-timing monitor based on non-invasive electro-optic sampling (EOS). The EOS monitor made uninterrupted shot-to-shot monitoring possible even during the seeded FEL operation. The EOS system was then used for arrival-timing feedback with an adjustability of 100 fs for continual operation of the HHG-seeded FEL. Using the EOS-based beam drift controlling system, the HHG-seeded FEL was operated over half a day with an effective hit rate of 20%–30%. The output pulse energy was $20~{\rm\mu}\text{J}$ at the 61.2 nm wavelength. Towards seeded FELs in the water window region, we investigated our upgrade plan to seed high-power FELs with HH photon energy of 30–100 eV and lase at shorter wavelengths of up to 2 nm through high-gain harmonic generation (HGHG) at the energy-upgraded SPring-8 Compact SASE Source (SCSS) accelerator. We studied a benefit as well as the feasibility of the next HHG-seeded FEL machine with single-stage HGHG with tunability of a lasing wavelength.


Sign in / Sign up

Export Citation Format

Share Document