Hydraulic fracture propagation and the interpretation of pressure-time records for in-situ stress determinations

1979 ◽  
Vol 16 (1) ◽  
pp. A3 ◽  
Keyword(s):  
Hydraulic Fracture ◽  
Fracture Propagation ◽  
In Situ Stress ◽  
Pressure Time ◽  
Hydraulic Fracture Propagation

Investigation of the influence of natural fractures and in situ stress on hydraulic fracture propagation using a distinct-element approach

2015 ◽  
Vol 52 (7) ◽  
pp. 926-946 ◽  
Author(s):  
N. Zangeneh ◽  
E. Eberhardt ◽  
R.M. Bustin
Keyword(s):  
Rock Mass ◽  
Hydraulic Fracturing ◽  
Hydraulic Fracture ◽  
Distinct Element ◽  
Fracture Propagation ◽  
In Situ Stress ◽  
Natural Fractures ◽  
Geological Conditions ◽  
Hydraulic Fracture Propagation

Hydraulic fracturing is the primary means for enhancing rock mass permeability and improving well productivity in tight reservoir rocks. Significant advances have been made in hydraulic fracturing theory and the development of design simulators; however, these generally rely on continuum treatments of the rock mass. In situ, the geological conditions are much more complex, complicated by the presence of natural fractures and planes of weakness such as bedding planes, joints, and faults. Further complexity arises from the influence of the in situ stress field, which has its own heterogeneity. Together, these factors may either enhance or diminish the effectiveness of the hydraulic fracturing treatment and subsequent hydrocarbon production. Results are presented here from a series of two-dimensional (2-D) numerical experiments investigating the influence of natural fractures on the modeling of hydraulic fracture propagation. Distinct-element techniques applying a transient, coupled hydromechanical solution are evaluated with respect to their ability to account for both tensile rupture of intact rock in response to fluid injection and shear and dilation along existing joints. A Voronoi tessellation scheme is used to add the necessary degrees of freedom to model the propagation path of a hydraulically driven fracture. The analysis is carried out for several geometrical variants related to hypothetical geological scenarios simulating a naturally fractured shale gas reservoir. The results show that key interactions develop with the natural fractures that influence the size, orientation, and path of the hydraulic fracture as well as the stimulated volume. These interactions may also decrease the size and effectiveness of the stimulation by diverting the injected fluid and proppant and by limiting the extent of the hydraulic fracture.

The Impact of Layering and Permeable Frictional Interfaces on Hydraulic Fracturing in Unconventional Reservoirs

2021 ◽  
pp. 1-14
Author(s):  
Qian Gao ◽  
Ahmad Ghassemi
Keyword(s):  
Mechanical Properties ◽  
Hydraulic Fracture ◽  
Fracture Propagation ◽  
In Situ Stress ◽  
Height Growth ◽  
Interface Element ◽  
Hydraulic Fractures ◽  
Hydraulic Fracture Propagation ◽  
Fracture Height

Summary The impacts of formation layering on hydraulic fracture containment and on pumping energy are critical factors in a successful stimulation treatment. Conventionally, it is considered that the in-situ stress is the dominant factor controlling the fracture height. The influence of mechanical properties on fracture height growth is often ignored or is limited to consideration of different Young’s moduli. Also, it is commonly assumed that the interfaces between different layers are perfectly bounded without slippage, and interface permeability is not considered. In-situ experiments have demonstrated that variation of modulus and in-situ stress alone cannot explain the containment of hydraulic fractures observed in the field (Warpinski et al. 1998). Enhanced toughness, in-situ stress, interface slip, and energy dissipation in the layered rocks should be combined to contribute to the fracture containment analysis. In this study, we consider these factors in a fully coupled 3D hydraulic fracture simulator developed based on the finite element method. We use laboratory and numerical simulations to investigate these factors and how they affect hydraulic fracture propagation, height growth, and injection pressure. The 3D fully coupled hydromechanical model uses a special zero-thickness interface element and the cohesive zone model (CZM) to simulate fracture propagation, interface slippage, and fluid flow in fractures. The nonlinear mechanical behavior of frictional sliding along interface surfaces is considered. The hydromechanical model has been verified successfully through benchmarked analytical solutions. The influence of layered Young’s modulus on fracture height growth in layered formations is analyzed. The formation interfaces between different layers are simulated explicitly through the use of the hydromechanical interface element. The impacts of mechanical and hydraulic properties of the formation interfaces on hydraulic fracture propagation are studied. Hydraulic fractures tend to propagate in the layer with lower Young’s modulus so that soft layers could potentially act as barriers to limit the height growth of hydraulic fractures. Contrary to the conventional view, the location of hydraulic fracturing (in softer vs. stiffer layers) does affect fracture geometry evolution. In addition, depending on the mechanical properties and the conductivity of the interfaces, the shear slippage and/or opening along the formation interfaces could result in flow along the interface surfaces and terminate the fracture growth. The frictional slippage along the interfaces can serve as an effective mechanism of containment of hydraulic fractures in layered formations. It is suggested that whether a hydraulic fracture would cross a discontinuity depends not only on the layers’ mechanical properties but also on the hydraulic properties of the discontinuity; both the frictional slippage and fluid pressure along horizontal formation interfaces contribute to the reinitiation of a hydraulic fracture from a pre-existing flaw along the interfaces, producing an offset from the interception point to the reinitiation point.

Containment of Massive Hydraulic Fractures

1978 ◽  
Vol 18 (01) ◽  
pp. 27-32 ◽  
Author(s):  
E.R. Simonson ◽  
A.S. Abou-Sayed ◽  
R.J. Clifton
Keyword(s):  
Hydraulic Fracture ◽  
Oil And Gas ◽  
Fracture Propagation ◽  
Rocky Mountain ◽  
In Situ Stress ◽  
Hydraulic Fractures ◽  
Pressure Gradients ◽  
In Situ Stresses ◽  
Gas Bearing

Abstract Hydraulic fracture containment is discussed in relationship to linear elastic fracture mechanics. Three cases are analyzed,the effect of different material properties for the pay zone and the barrier formation,the characteristics of fracture propagation into regions of varying in-situ stress, propagation into regions of varying in-situ stress, andthe effect of hydrostatic pressure gradients on fracture propagation into overlying or underlying barrier formations. Analysis shows the importance of the elastic properties, the in-situ stresses, and the pressure gradients on fracture containment. Introduction Application of massive hydraulic fracture (MHF) techniques to the Rocky Mountain gas fields has been uneven, with some successes and some failures. The primary thrust of rock mechanics research in this area is to understand those factors that contribute to the success of MHF techniques and those conditions that lead to failures. There are many possible reasons why MHF techniques fail, including migration of the fracture into overlying or underlying barrier formations, degradation of permeability caused by application of hydraulic permeability caused by application of hydraulic fracturing fluid, loss of fracturing fluid into preexisting cracks or fissures, or extreme errors in preexisting cracks or fissures, or extreme errors in estimating the quantity of in-place gas. Also, a poor estimate of the in-situ permeability can result in failures that may "appear" to be caused by the hydraulic fracture process. Previous research showed that in-situ permeabilities can be one order of magnitude or more lower than permeabilities measured at near atmospheric conditions. Moreover, studies have investigated the degradation in both fracture permeability and formation permeability caused by the application of hydraulic fracture fluids. Further discussion of this subject is beyond the scope of this paper. This study will deal mainly with the containment of hydraulic fractures to the pay zone. In general, the lithology of the Rocky Mountain region is composed of oil- and gas-bearing sandstone layers interspaced with shales (Fig. 1). However, some sandstone layers may be water aquifers and penetration of the hydraulic fracture into these penetration of the hydraulic fracture into these aquifer layers is undesirable. Also, the shale layers can separate producible oil- and gas-bearing zones from nonproducible ones. Shale layers between the pay zone and other zones can be vital in increasing successful stimulation. If the shale layers act as barrier layers, the hydraulic fracture can be contained within the pay zone. The in-situ stresses and the stiffness, as characterized by the shear modulus of the zones, play significant roles in the containment of a play significant roles in the containment of a hydraulic fracture. The in-situ stresses result from forces in the earth's crust and constitute the compressive far-field stresses that act to close the hydraulic fracture. Fig. 2 shows a schematic representation of in-situ stresses acting on a vertical hydraulic fracture. Horizontal components of in-situ stresses may vary from layer to layer (Fig. 2). For example, direct measurements of in-situ stresses in shales has shown the minimum horizontal principal stress is nearly equal to the overburden principal stress is nearly equal to the overburden stress. SPEJ P. 27

Infill-Well Fracturing Optimization in Tightly Spaced Horizontal Wells

SPE Journal ◽  
2016 ◽  
Vol 22 (02) ◽  
pp. 582-595 ◽  
Author(s):  
Reza Safari ◽  
Richard Lewis ◽  
Xiaodan Ma ◽  
Uno Mutlu ◽  
Ahmad Ghassemi
Keyword(s):  
Stress State ◽  
Stress Field ◽  
Hydraulic Fracture ◽  
Fracture Propagation ◽  
Horizontal Wells ◽  
In Situ Stress ◽  
Work Flow ◽  
Treatment Schedule ◽  
Reservoir Geomechanics

Summary Cost-effective production from unconventional reservoirs relies on creating new reservoir surface area where fractures are extended into and produce from undepleted zones. Field observations indicate that infill-well fractures could propagate toward nearby producers and depleted zones. This communication between infill and producer wells has been seen to cause casing collapse, and negatively affect current production levels. In this paper, an integrated reservoir/geomechanics/fracture work flow is established to optimize infill-well treatment schedule and to minimize fracture communication between wells. In particular, the paper presents: (i) numerical evaluation of depletion-induced stress changes between tightly spaced producers, (ii) hydraulic-fracture curving in a perturbed stress field, and (iii) hydraulic-fracture communication between wells, and infill-well treatment-design optimization to maximize production. A systematic study of depletion effects and the key parameters that control fracture curving allows us to improve the infill-well fracture design by minimizing the communication between wells while maximizing the hydraulic-fracture extent. Depletion perturbs the in-situ stress tensor in the formation around fractured horizontal wells. The analysis shows that the perturbed-stress field is a function of stress/formation anisotropy, fluid mobility, pore pressure, operating bottomhole pressure (BHP), and Biot's constant. A fracture-propagation model, coupled with the altered in-situ stress field, is used to predict the hydraulic-fracture propagation path(s) and their radius of curvature (i.e., if the stress state dictates that the fractures should curve). The analyses are performed for different infill-well treatment schedule(s), and yield the most-likely fracture geometries (taking into account uncertainties in a shale formation). Resulting infill-well fracture geometries are imported into a reservoir simulator to quantify the production and to identify the optimal design parameters. The coupled work flow (reservoir/geomechanics/fracture) is then applied to a field example to demonstrate the feasibility of its application at the reservoir scale. The results show that (a) infill-well fractures between tightly spaced horizontal wells can intentionally be curved and (b) communication between wells and fracture-coverage area can be controlled by adjusting stimulation parameters to maximize recovery. Forward coupled modeling can be useful in guiding when to drill infill wells before the altered-stress state negatively affects production outcome.

Sign in / Sign up

Export Citation Format

Share Document