Local ventilation

2021 ◽  
pp. 7-108
Author(s):  
Zhixiang Cao ◽  
Yu Zhou ◽  
Shijie Cao ◽  
Yi Wang
Keyword(s):  
Local Ventilation

Hypoxic Pulmonary Vasoconstriction and Chronic Lung Disease

2013 ◽  
Vol 12 (3) ◽  
pp. 135-144 ◽  
Author(s):  
Erik R. Swenson
Keyword(s):  
Pulmonary Hypertension ◽  
Lung Disease ◽  
Hypoxic Pulmonary Vasoconstriction ◽  
World Health ◽  
Disease States ◽  
Pulmonary Vasoconstriction ◽  
Local Ventilation ◽  
Pulmonary Vascular Endothelium ◽  
Health And Disease ◽  
Health Organization

Hypoxic vasoconstriction in the lung is a unique and fundamental characteristic of the pulmonary circulation. It functions in health and disease states to better preserve ventilation-perfusion matching by diverting blood flow to better ventilated regions when local ventilation is compromised. As more areas of lung become hypoxic either with high altitude or global lung disease, then hypoxic pulmonary vasoconstriction (HPV) becomes less effective in ventilation-perfusion matching and can lead to pulmonary hypertension. HPV is intrinsic to the vascular smooth muscle and its mechanisms remain poorly understood. In addition, the pulmonary vascular endothelium, red cells, lung innervation, and numerous circulating vasoactive agents also affect the strength of HPV. This review will discuss the pathophysiology of HPV and address its role in pulmonary hypertension associated with World Health Organization Group 3 diseases. When sustained beyond many hours, HPV may initiate pulmonary vascular remodeling and lead to more fixed and less oxygen-responsive pulmonary hypertension if the hypoxic stimulus is maintained.

Optimization Design of an Axial-Flow Fan Used in Local Ventilation in Mining Industry

2011 ◽  
Author(s):  
Dhaval Desai ◽  
Jiang Zhou
Keyword(s):  
Optimization Design ◽  
Optimization Technique ◽  
Mining Industry ◽  
Axial Flow ◽  
Optimization Method ◽  
Low Noise ◽  
Design Constraint ◽  
Engineering Research ◽  
Blade Element Theory ◽  
Local Ventilation

In a world where the increasing demand on developing energy-efficient systems is probably the most stringent design constraint, the trend in engineering research in recent years has been to optimize the existing technologies rather than to implement new ones. The present work addresses a robust axial-type fan design technique developed using an optimization technique. A fan is indispensable equipment for primary and local ventilation in mining industries. We always pursue the fan with high working efficiency and low noise. In this paper, an optimization method is developed to improve the pneumatic properties of the fan based on the blade element theory. A new type of fan used in local ventilation is designed with the help of computer. It is shown that the new design enhanced the efficient up to 88%. Numerical analysis is also conducted to validate the optimization design results.

scholarly journals Experimental study on cooling of heading face by local ventilation.

1990 ◽  
Vol 106 (12) ◽  
pp. 725-729 ◽  
Author(s):  
Sohei SHIMADA ◽  
Shoji OHMURA
Keyword(s):  
Experimental Study ◽  
Local Ventilation

Emission and local ventilation control of droplets generated by condensation and bubble-bursting during pickling

2021 ◽  
pp. 103491
Author(s):  
Jia-Ning Fan ◽  
Yang Yang ◽  
Yi Wang ◽  
Yuming Zhang ◽  
Yingrong Wei ◽  
...  
Keyword(s):  
Ventilation Control ◽  
Bubble Bursting ◽  
Local Ventilation

Interaction between CO2 concentration and flow rate on peripheral airway resistance

1991 ◽  
Vol 70 (6) ◽  
pp. 2514-2521 ◽  
Author(s):  
A. Kaise ◽  
A. N. Freed ◽  
W. Mitzner
Keyword(s):  
Flow Rate ◽  
Airway Resistance ◽  
Co2 Concentration ◽  
Low Flow ◽  
Flow Rates ◽  
Peripheral Airway ◽  
Residual Capacity ◽  
Local Ventilation ◽  
End Tidal ◽  
The Relationship

In the present study, we investigated the interaction between CO2 concentration and rate of delivered flow on peripheral airway resistance (Rp) in the intact canine lung. Dogs were anesthetized, intubated, paralyzed, and mechanically ventilated with room air to maintain end-tidal CO2 between 4.8 and 5.2%. Using a wedged bronchoscope technique, we measured Rp at functional residual capacity. The relationship between CO2 concentration and Rp was measured at flow rates of 100 and 400 ml/min with 5, 3, 2, 1, and 0% CO2 in air. Measurements were made at the end of a 3-min exposure to each gas. At low flow rates (100 ml/min) responses to hypocapnia were small, whereas at high flow rates (400 ml/min) responses were large. The PC50 (defined as the CO2 concentration required to produce a 50% increase in Rp above baseline Rp established on 5% CO2) at 400 ml/min (1.73%) was significantly larger than that at 100 ml/min (0.38%). We also directly measured the relationship between Rp and flow rate with 5% CO2 (normocapnia) or 1% CO2 (hypocapnia) delivered into the wedged segment. Increases in normocapnic flow caused small but significant decreases in Rp. In contrast, increases in hypocapnic flow from 100 to 400 ml/min caused a 108% increase in Rp. Thus the response to hypocapnia is augmented by increasing flow rate. This interaction can be explained by a simple model that considers the effect of local ventilation-perfusion ratio and gas mixing on the local CO2 concentration at the site of peripheral airway contraction.

scholarly journals An Investigation of the Quantitative Correlation between Urban Morphology Parameters and Outdoor Ventilation Efficiency Indices

Atmosphere ◽  
2019 ◽  
Vol 10 (1) ◽  
pp. 33 ◽  
Author(s):  
Yunlong Peng ◽  
Zhi Gao ◽  
Riccardo Buccolieri ◽  
Wowo Ding
Keyword(s):  
Flow Rate ◽  
Central Area ◽  
Urban Morphology ◽  
Quantitative Correlation ◽  
Visitation Frequency ◽  
Ventilation Efficiency ◽  
Local Ventilation ◽  
Ventilation Performance ◽  
Poor Ventilation ◽  
Morphology Parameters

Urban outdoor ventilation and pollutant dispersion have important implications for urban design and planning. In this paper, two urban morphology parameters, i.e. the floor area ratio (FAR) and the building site coverage (BSC), are considered to investigate their quantitative correlation with urban ventilation indices. An idealized model, including nine basic units with FAR equal to 5, is considered and the BSC is increased from 11% to 77%, generating 101 non-repetitive asymmetric configurations, with attention to the influence of plan density, volume ratio, and building layout on ventilation performance within urban plot areas. Computational Fluid Dynamics (CFD) simulations are used to assess the ventilation efficiency at pedestrian level (2m above the ground) within each model central area. Six indices, including the air flow rate (Q), the mean age of air (τP), the net escape velocity (NEV), the purging flow rate (PFR), the visitation frequency (VF), and the resident time (TP) are used to assess the local ventilation performance. Results clearly show that, fixing the FAR, the local ventilation performance is not linearly related to BSC, but it also depends on buildings arrangement. Specifically, as the BSC increases, the ventilation in the central area does not keep reducing. On the contrary, some forms with low BSC have poor ventilation and some particular configurations with high BSC have better ventilation, which indicates that not all high-density configurations experience poor ventilation. The local ventilation performance can be effectively improved by rationally arranging the buildings. Even though the application of these results to real cities requires further research, the present findings suggest a preliminary way to build up a correlation between urban morphology parameters and ventilation efficiency tailored to develop a feasible framework for urban designers.

Sign in / Sign up

Export Citation Format

Share Document