Fault Mechanics

2007 ◽  
pp. 441-483 ◽  
Author(s):  
C.H. Scholz
Keyword(s):  
2021 ◽  
Author(s):  
Caroline Chalumeau ◽  

<p>Repeating earthquakes are earthquakes that repeatedly break a single, time-invariant fault patch. They are generally associated with aseismic slip, which is thought to load asperities, leading to repeated rupture. Repeating earthquakes are therefore useful tools to study aseismic slip and fault mechanics, with possible applications to earthquake triggering, loading rates and earthquake forecasting.</p><p>In this study, we analyze one year of aftershocks following the 16<sup>th</sup> April 2016 Mw 7.8 Pedernales earthquake in Ecuador to find repeating families, using data recorded by permanent and temporary seismological stations. In our area, seismicity during both the inter-seismic and post-seismic periods has been previously linked to aseismic slip. We calculate waveform cross-correlation coefficients (CC) on all available catalogue events, which we use to sort events into preliminary families, using a minimum CC of 0.95. These events were then stacked and used to perform template-matching on the continuous data. In total, 376 earthquakes were classified into 62 families of 4 to 15 earthquakes, including 8 from the one-year period before the mainshock. We later relocated these earthquakes using a double-difference method, which confirmed that most of them did have overlapping sources.</p><p>Repeating earthquakes seem to concentrate largely around the areas of largest afterslip release, where afterslip gradient is the highest. We also find an increase in the recurrence time of repeating events with time after the mainshock, over the first year of the postseismic period, which highlights a possible timeframe for the afterslip’s deceleration. Our results suggest that while most repeating aftershocks are linked to afterslip release, the afterslip gradient may play a bigger role in determining their location than previously thought.</p>


2013 ◽  
Vol 288 ◽  
pp. 88-91
Author(s):  
Jiu Cheng Zhu ◽  
Su Zhu

Caterpillar plays an important role in engineering. While the problems existed affect on its reliability. Because of the testing condition it is difficult to solve some problems in fault mechanics. Nowadays the reliability just relies on the maintenance and repair which deeply affect its efficiency. With the rapid and widely used of collaborative simulation based on interfaces in Caterpillar, in this paper collaborative simulation based on interfaces is researched in Caterpillar which will reduce or replace the experimentation. An example on the planetary frame demonstrate the feasible. Collaborative simulation based on interfaces applied in caterpillar will be an efficiency approach to engineering.


2020 ◽  
Author(s):  
Marco Mercuri ◽  
Eugenio Carminati ◽  
Maria Chiara Tartarello ◽  
Marco Brandano ◽  
Paolo Mazzanti ◽  
...  

<p>Fractures constitute the main pathway for fluids in fault damage zones hosted in low-porosity rocks. Understanding the factors controlling fracture distribution is hence fundamental to better assess fluids circulation in fault damage zones, with evident implications for fault mechanics, hydrogeology and hydrocarbon exploration. Being usually characterized by a strong damage and structural complexity, this is of particularly importance for relay zones.</p><p>We integrated classical and modern structural geology techniques to investigate the factors controlling fracture distribution within a portion of a relay ramp damage zone pertaining to the Tre Monti fault (Central Italy). The damage zone is hosted within peritidal carbonates and located at the footwall of the relay ramp front segment. We analysed the distribution of the fracture density in the outcrop through (1) scanlines measured in the field, (2) oriented rock samples, and (3) scan-areas performed on a virtual outcrop model obtained by aerial structure-from-motion.</p><p>Our results highlight structural and lithological control on fracture distribution. Scanlines and virtual scan-areas show that fracture density increases with the distance from the front segment of the relay ramp. Moreover, all the methods highlight that supratidal and intertidal carbonate facies exhibit higher fracture density than subtidal limestones.</p><p>This apparently anomalous trend of fracture density, that increases moving away from a main fault segment, has two main explanations. (1) The damage is associated with the relay ramp development: approaching the centre of the relay ramp (i.e., moving away from the front segment) an increase in the number of subsidiary faults with their associated damage zones promotes high fracture densities. (2) The increase in fracture density can be attributed to the increasing content in supratidal and intertidal carbonate facies that are more abundant in the centre of the relay ramp.</p><p>Our results provide important suggestions for factors controlling fracture distribution and fluid flow within relay ramps hosted by shallow water limestones. We show that the trend of fracture distribution with respect to a main fault is not easily predictable in presence of a relay ramp, because it can be modulated by the subsidiary faults formation and slip during the relay ramp development. Moreover, carbonate facies play a non-negligible role in fracture distribution within fault zones hosted in shallow-water carbonates.</p>


Sign in / Sign up

Export Citation Format

Share Document