Thermoresponsive polymer-modified microfibers for cell separations

2017 ◽  
Vol 53 ◽  
pp. 81-92 ◽  
Author(s):  
Kenichi Nagase ◽  
Yoichi Sakurada ◽  
Satoru Onizuka ◽  
Takanori Iwata ◽  
Masayuki Yamato ◽  
...  
2016 ◽  
Vol 4 (39) ◽  
pp. 6381-6397 ◽  
Author(s):  
Kenichi Nagase ◽  
Teruo Okano

In this review, bioseparations using thermoresponsive polymers are summarized. Thermoresponsive chromatography for separating bioactive compounds and proteins, and cell separations using thermoresponsive polymers and their properties are reviewed.


2021 ◽  
Vol 11 (1) ◽  
Author(s):  
Kenichi Nagase ◽  
Yuta Umemoto ◽  
Hideko Kanazawa

AbstractTemperature-responsive chromatography using thermoresponsive polymers is innovative and can control analyte retention via column temperature. Analyte elution behavior in this type of chromatography depends on the modified thermoresponsive polymer and the structure of the base materials. In the present study, we examine the effect of the pore diameter of silica beads on analyte elution behavior in temperature-responsive chromatography. Poly(N-isopropylacrylamide-co-n-butyl methacrylate) hydrogel was applied to beads of various pore sizes: 7, 12, and 30 nm. Almost the same amount of copolymer hydrogel was applied to all beads, indicating that the efficiency of copolymer modification was independent of pore size. Analyte retention on prepared beads in a packed column was observed using steroids, benzodiazepines, and barbiturates as analytes. Analyte retention times increased with temperature on packed columns of 12- and 30-nm beads, whereas the column packed with 7-nm beads exhibited decreased retention times with increasing temperature. The difference in analyte elution behavior among the various pore sizes was attributed to analyte diffusion into the bead pores. These results demonstrate that bead pore diameter determines temperature-dependent elution behavior.


2021 ◽  
Vol 11 (8) ◽  
pp. 3379
Author(s):  
Hyung Ju Lee ◽  
Chan Ho Jeong ◽  
Dae Yun Kim ◽  
Chang Kyoung Choi ◽  
Seong Hyuk Lee

The present study aims to measure the solid–liquid interface temperature of an evaporating droplet on a heated surface using a thermoresponsive polymer. Poly(N-isopropylacrylamide) (pNIPAM) was used owing to its sensitive optical and mechanical properties to the temperature. We also measured the refractive index variation of the pNIPAM solution by using the surface plasmon resonance imaging (SPRi). In particular, the present study proposed a new method to measure the solid–liquid interface temperature using the correlation among reflectance, refractive index, and temperature. It was found that the reflectance of a pNIPAM solution decreased after the droplet deposition. The solid–liquid interface temperature, estimated from the reflectance, showed a lower value at the center of the droplet, and it gradually increased along the radial direction. The lowest temperature at the contact line region is present because of the maximum evaporative cooling. Moreover, the solid–liquid interface temperature deviation increased with the surface temperature, which means solid–liquid interface temperature should be considered at high temperature to predict the evaporation flux of the droplet accurately.


Langmuir ◽  
2014 ◽  
Vol 30 (14) ◽  
pp. 4040-4048 ◽  
Author(s):  
Cheng Lian ◽  
Le Wang ◽  
Xueqian Chen ◽  
Xia Han ◽  
Shuangliang Zhao ◽  
...  

2002 ◽  
Vol 74 (16) ◽  
pp. 4160-4166 ◽  
Author(s):  
Kimihiro Yoshizako ◽  
Yoshikatsu Akiyama ◽  
Hidenori Yamanaka ◽  
Yasuro Shinohara ◽  
Yukio Hasegawa ◽  
...  

2000 ◽  
Vol 11 (4) ◽  
pp. 549-556 ◽  
Author(s):  
Olavi Siiman ◽  
Alexander Burshteyn ◽  
John A. Maples ◽  
James K. Whitesell

2012 ◽  
Vol 3 (6) ◽  
pp. 1408 ◽  
Author(s):  
Stéphanie Louguet ◽  
Bérengère Rousseau ◽  
Romain Epherre ◽  
Nicolas Guidolin ◽  
Graziella Goglio ◽  
...  

Nanomaterials ◽  
2021 ◽  
Vol 11 (11) ◽  
pp. 3015
Author(s):  
Marwa A. Ahmed ◽  
Júlia Erdőssy ◽  
Viola Horvath

Highly selective multifunctional magnetic nanoparticles containing a thermoresponsive polymer shell were developed and used in the sample pretreatment of urine for the assessment of lysozymuria in leukemia patients. Crosslinked poly(N-isopropylacrylamide-co-acrylic acid-co-N-tert-butylacrylamide) was grown onto silica-coated magnetic nanoparticles by reversible addition fragmentation chain transfer (RAFT) polymerization. The lysozyme binding property of the nanoparticles was investigated as a function of time, protein concentration, pH, ionic strength and temperature and their selectivity was assessed against other proteins. High-abundant proteins, like human serum albumin and γ-globulins did not interfere with the binding of lysozyme even at elevated concentrations characteristic of proteinuria. A sample cleanup procedure for urine samples has been developed utilizing the thermocontrollable protein binding ability of the nanoparticles. Method validation was carried out according to current bioanalytical method validation guidelines. The method was highly selective, and the calibration was linear in the 25 to 1000 µg/mL concentration range, relevant in the diagnosis of monocytic and myelomonocytic leukemia. Intra- and inter-day precision values ranged from 2.24 to 8.20% and 1.08 to 5.04%, respectively. Intra-day accuracies were between 89.9 and 117.6%, while inter-day accuracies were in the 88.8 to 111.0% range. The average recovery was 94.1 ± 8.1%. Analysis of unknown urine samples in comparison with a well-established reference method revealed very good correlation between the results, indicating that the new nanoparticle-based method has high potential in the diagnosis of lysozymuria.


1998 ◽  
Vol 31 (7) ◽  
pp. 2394-2394 ◽  
Author(s):  
S. Kunugi ◽  
K. Takano ◽  
N. Tanaka ◽  
K. Suwa ◽  
M. Akashi

Sign in / Sign up

Export Citation Format

Share Document